Краткое содержание страницы № 1
MEA
3.1
Mesh Sensor Monitor
Users Guide
Document Revision 3.1.3
Краткое содержание страницы № 2
Краткое содержание страницы № 3
Mesh Enabled Architecture Mesh Sensor Monitor Copyrights The Motorola products described in this document may include copyrighted Motorola computer programs. Laws in the United States and other countries reserve for Motorola certain exclusive rights for copyrighted computer programs. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this document may not be copied or reproduced in any manner without the express written permission of Mo
Краткое содержание страницы № 4
Mesh Enabled Architecture Mesh Sensor Monitor Table of Contents OVERVIEW...................................................................................................................................1 SUPPORTED OPERATING SYSTEMS .......................................................................................1 SYSTEM REQUIREMENTS .........................................................................................................1 INSTALLING MESH SENSOR MONITOR..............
Краткое содержание страницы № 5
Mesh Enabled Architecture Mesh Sensor Monitor Tools Menu Option ............................................................................................................20 Toolbars Tab ...................................................................................................................21 Button Icon.........................................................................................................................21 Command Tab ..........................................
Краткое содержание страницы № 6
Mesh Enabled Architecture Mesh Sensor Monitor List of Figures Figure 1. MeshSensor Systems Setup – Initial Installation Dialog.....................................2 Figure 2. MeshSensor Systems Setup – License Agreement Dialog .................................2 Figure 3. Ready to Install Dialog............................................................................................3 Figure 4. Mesh Sensor Monitor Notice Dialog...........................................................
Краткое содержание страницы № 7
Mesh Enabled Architecture Geo-Location Reference Guide Overview The Mesh Sensor Monitor (MSM) application provides an interface that allows a user/operator to send or receive data from a remote wireless sensor node within a Mesh Enabled Architecture (MEA™) network. Sensor devices can be connected to the MEA wireless device via an RS-232 or an RS-485 interface. Mesh Sensor Monitor is designed as a debug tool for sensor network development, sensor/network integration, or third party develo
Краткое содержание страницы № 8
Mesh Enabled Architecture Mesh Sensor Monitor Installing Mesh Sensor Monitor Insert the MEA Administration CD and install the Mesh Sensor Monitor application from /Software directory. Double click on SensorSetup.exe. The MeshSensor Systems Setup dialog will be displayed. Figure 1. MeshSensor Systems Setup – Initial Installation Dialog Click on the Next button to display the License Agreement dialog. Figure 2. MeshSensor Systems Setup – License Agreement Dialog 2
Краткое содержание страницы № 9
Mesh Enabled Architecture Geo-Location Reference Guide After reading the License Agreement, select the YES radio button and click on the Next button to continue. When the Ready to Install dialog is displayed, confirm the default Install and Shortcut folders and click on the Next button to proceed with the installation. Figure 3. Ready to Install Dialog If you have previously installed the Mesh Sensor Monitor application, the Notice dialog will be displayed. Click on the Yes button to conf
Краткое содержание страницы № 10
Mesh Enabled Architecture Mesh Sensor Monitor For both initial installation and reinstallation of the Mesh Sensor Monitor application, the Performing Setup Actions dialog will be displayed. Figure 5. Performing Setup Actions Dialog When all installation actions have been completed, the MeshSensor Systems Installed Successfully dialog will be displayed. Click on the Finish button to dismiss the dialog and complete the installation. Figure 6. MeshSensor Systems Installed Successfull
Краткое содержание страницы № 11
Mesh Enabled Architecture Geo-Location Reference Guide Operation All functional operations for the MSM are performed using the Mesh Sensor Monitor Graphical User Interface (GUI). Mesh Sensor Monitor Main Window The Mesh Sensor Monitor (MSM) main window is shown in Figure 7.. This is the display configuration presented at application startup. This configuration presents four sub-windows, which are described in detail in the following sections. Figure 7. Mesh Sensor Monitor GUI
Краткое содержание страницы № 12
Mesh Enabled Architecture Mesh Sensor Monitor Sensor ID Window The Sensor ID Window displayed on the Sensors tab shows a list of all sensors that have been discovered. Only active sensors are available to the user for communication. Active sensors are designated by a blinking green indicator displayed to the left of the corresponding MAC address. Devices can be sorted or identified by MAC address, IP address, name, or activity. To manage the device display attributes, right click on the
Краткое содержание страницы № 13
Mesh Enabled Architecture Geo-Location Reference Guide Alert Window The Alert Window displays certain events that may occur while the system is operating. These events are summarized by Event Time, MAC Address, Name, and the Status. You can choose to either enable or disable display this window by selecting the Alert Window option under the Window menu. Figure 9. Alert Window Alert Parameter Description Event Time The date and time stamp for when the event that triggered the aler
Краткое содержание страницы № 14
Mesh Enabled Architecture Mesh Sensor Monitor Alert Parameter Description Sensor is Resurrected – Communications have been restored for a sensor device that is currently configured in the network that was formerly unreachable. Activity Window The Activity Window displays message information, such as date and time, direction, sequence #, message size, and message data (text & hex) for the selected sensor. Figure 10. Sensor Activity Window Activity Parameter Description Data St
Краткое содержание страницы № 15
Mesh Enabled Architecture Geo-Location Reference Guide Node Data Summary Pane The Node Data Summary Panel summarizes the number of data packets and bytes received and sent from the specified sensor node. Figure 11. Node Data Summary Pane Current Incoming Activity Window The Current Incoming Activity window is used to display serial modem activity that is currently visible to the host device executing the MSM application. The node table is populated automatically after active nod
Краткое содержание страницы № 16
Mesh Enabled Architecture Mesh Sensor Monitor Current Incoming Activity Parameter Description formatted to remove hyphenation. The default name can be changed using the sensor properties. Direction Messages being transmitted are identified as Outbound or Inbound. Msg Type Messages will be categorized by the following types: Message Type # Displayed Text 350 Serial Data 351 GPIO Status 352 Serial + GPIO 353 S
Краткое содержание страницы № 17
Mesh Enabled Architecture Geo-Location Reference Guide File Menu Options The MSM makes use of several file types. The *.msm file format is used to store sensor data communications activity. The *.smw file format is used to store a specific workspace configuration for future access. Open To open a sensor data capture file, select File → Open from the main menu bar on the MSM GUI: Navigate to the appropriate directory and select the file to be opened. Figure 13. Windows File Open Dial
Краткое содержание страницы № 18
Mesh Enabled Architecture Mesh Sensor Monitor Workspace Configuration Each window within the application can be repositioned by dragging and dropping the window to a new location. Workspace windows can also be resized by selecting and dragging the desired corner. An example of a reconfigured workspace is shown in Figure 15. Figure 15. An Example of Workspace Configuration After the workspace has been configured, the entire configuration for the workspace can then be saved as a *
Краткое содержание страницы № 19
Mesh Enabled Architecture Geo-Location Reference Guide Open Workspace To open a workspace configuration file, select File → Open Workspace from the main menu bar on the MSM GUI. Navigate to the appropriate directory and select the file to be opened. Double click on the file name or click on the Open button. Figure 16. Open Workspace Dialog Save Workspace To save a workspace configuration file, select File → Save Workspace from the main menu bar on the MSM GUI. Navigate to the ap
Краткое содержание страницы № 20
Mesh Enabled Architecture Mesh Sensor Monitor View Menu Options In addition to options for viewing different windows and toolbars, the View menu allows you to modify the parameters on the Display (Sensor) Template. Log Entries The Log Entries Window displays the following information for all current log entries. Figure 17. Log Entries Window Log Entry Data Type Description Entry ID A sequence number assigned by the system indicating the order in which the log entry was made.
