Краткое содержание страницы № 1
NS-16T01FS
16-Port 10/100Mbps
Fast Ethernet
Smart Switch
User’s Guide
Краткое содержание страницы № 2
Краткое содержание страницы № 3
FCC Warning This equipment has been tested and found to comply with the regulations for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user’s guide, may cause harmful interference to radio communicat
Краткое содержание страницы № 4
UL Warning a) Elevated Operating Ambient Temperature- If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the manufacturer's maximum rated ambient temperature (Tmra). b) Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow required for safe
Краткое содержание страницы № 5
TABLE OF CONTENTS ABOUT THIS GUIDE............................................................................ 1 PURPOSE................................................................................................ 1 TERMS/USAGE....................................................................................... 1 INTRODUCTION .................................................................................. 3 FAST ETHERNET TECHNOLOGY ................................................
Краткое содержание страницы № 6
CONFIGURATION.............................................................................. 15 CONSOLE PORT (RS-232 DCE)........................................................... 15 CONFIGURING THE SWITCH................................................................. 18 LOGIN .................................................................................................. 19 MAIN MENU ........................................................................................ 20 CONFI
Краткое содержание страницы № 7
ABOUT THIS GUIDE Congratulations on your purchase of your Alloy 16-Port 10/100Mbps Fast Ethernet Smart Switch. This device integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities in a highly flexible package. Purpose This guide discusses how to install your 16-Port 10/100Mbps Fast Ethernet Smart Switch. Terms/Usage In this guide, the term “Switch” (first letter upper case) refers to your 16-Port 10/100Mbps Fast Ethernet Smart Switch, and “switch” (first letter low
Краткое содержание страницы № 8
Краткое содержание страницы № 9
INTRODUCTION This chapter describes the features of the 16-Port 10/100Mbps Fast Ethernet Smart Switch and some background information about Ethernet/Fast Ethernet and Switching technology. Fast Ethernet Technology The growing importance of LANs and the increasing complexity of desktop computing applications are fueling the need for high performance networks. A number of high-speed LAN technologies have been proposed to provide greater bandwidth and improve client/server response t
Краткое содержание страницы № 10
Switching Technology Another approach to pushing beyond the limits of Ethernet technology is the development of switching technology. A switch bridges Ethernet packets at the MAC address level of the Ethernet protocol transmitting among connected Ethernet or Fast Ethernet LAN segments. Switching is a cost-effective way of increasing the total network capacity available to users on a local area network. A switch increases capacity and decreases network loading by dividing a local area
Краткое содержание страницы № 11
VLAN (Virtual Local Area Network) A VLAN is a group of end-stations that are not constrained by their physical location and can communicate as if in a common broadcast domain, a LAN. The primary utility of using VLAN is to reduce latency and need for routers, using faster switching instead. Other VLAN features include: Security Security is increased with the reduction of opportunity for eavesdropping on a broadcast network because data will be switched only to those users within the
Краткое содержание страницы № 12
Features 16×10/100Mbps Auto-negotiation Ethernet ports All ports support auto MDI/MDIX, so there is no need to use cross-over cables or an up-link port Full/half duplex transfer mode for each port Wire speed reception and transmission Store-and-Forward switching scheme with capability to support rate adaptation and ensure data integrity Broadcast storm protection Up to 4K unicast address entities per device, self- learning, and table aging 256KBytes on-chip packet buffer f
Краткое содержание страницы № 13
UNPACKING AND INSTALLATION This chapter provides unpacking and setup information for the Switch. Unpacking Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain the following items: One 16-Port 10/100Mbps Fast Ethernet Smart Switch One AC power cord, suitable for your area’s electrical power connections Four rubber feet to be used for shock cushioning Screws and two 19“ rack mounting brackets One console cable This User’s Guide
Краткое содержание страницы № 14
Installation The site where you install the hub stack may greatly affect its performance. When installing, consider the following pointers: Install the Switch in a fairly cool and dry place. See Technical Specifications for the acceptable temperature and humidity operating ranges. Install the Switch in a site free from strong electromagnetic field generators (such as motors), vibration, dust, and direct exposure to sunlight. Leave at least 10cm of space at the front and rear of th
Краткое содержание страницы № 15
FX FX 16-Port 10/100Mbps Ethernet Sm art Switch POWER 6- ort 10/100Mbps Ethernet Smart Switch 1 P POWER LinkA / CT SYSTEM F DX Link/ ACT SYSTEM FD X Rack Mounting The switch can be mounted in an EIA standard-size, 19-inch rack, which can be placed in a wiring closet with other equipment. Attach the mounting brackets at the switch’s front panel (one each side), and secure them with the screws provided. Figure 1. Combine the Switch with the provided screws Then, use screws provided with
Краткое содержание страницы № 16
Connecting Network Cable The Switch supports 10Mbps Ethernet or 100Mbps Fast Ethernet and it runs both in half and full duplex modes. The Switch ports are Auto-MDI types. The Switch can automatically change all ports between MDI-II & MDI-X types alleviating any worry about using standard or crossover type cables. AC Power The Switch can be used with an AC power supply of 100~240V AC, 50~60 Hz. The Switch’s power supply will adjust to the local power source automatically and may b
Краткое содержание страницы № 17
IDENTIFYING EXTERNAL COMPONENTS This chapter describes the front panel, rear panel, and LED indicators of the Switch. Front Panel The figure below shows the front panels of the Switch. Figure 3. Front panel of 16-port 10/100Mbps Fast Ethernet Switch LED Indicator Comprehensive LED indicators display the status of the switch and the network (see the LED Indicators chapter below). 10/100BASE-T Twisted-Pair Ports These ports support network speeds of either 10Mbps or 100Mbps, and c
Краткое содержание страницы № 18
Rear Panel AC Power Connector Figure 4. Rear panel of the Switch AC Power Connector This is a three-pronged (IEC) connector that supports the power cord. Plug the female connector of the provided power cord into this connector, and the male into a power outlet. Supported input voltages range from 100~240V AC at 50~60Hz. 12
Краткое содержание страницы № 19
UNDERSTANDING LED INDICATORS The front panel LEDs provide instant status feedback, and help monitor and troubleshoot when needed. 16-Port 10/100Mbps Ethernet Smart Switch FX 1 234 56 7 8 9 10 11 12 13 14 15 16 POWER Link/ACT SYSTEM FDX Figure 5. LED indicators of the Switch Power and System LEDs POWER : Power Indicator On : When the Power LED lights on, the Switch is receiving power. Off : When the Power turns off or the power cord has improper connection. SYSTEM: Management Ind
Краткое содержание страницы № 20
Ports 1~16 Status LEDs Link/ACT On : When the Link/ACT LED lights on, the respective port is successfully connected to an Ethernet network. Blinking : When the Link/ACT LED is blinking, the port is transmitting or receiving data on the Ethernet network. Off :No link. 100Mbps On : When the 100Mbps LED lights on, the respective port is connected to a 100Mbps Fast Ethernet network. Off : When the respective port is connected to a 10Mbps Ethernet network Fibre Module LEDs FX Link
