Краткое содержание страницы № 1
®
A Division of Cisco Systems, Inc.
24 or 48-Port 10/100 Fast Ethernet Switch
16, 24, or 48-Port 10/100/1000 Gigabit Ethernet Switch
with WebView
User Guide
WIRED
Model No.
SRW2016/SRW2024/SRW2048/SRW224G4/SRW248G4
Краткое содержание страницы № 2
WebView Switches Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2005 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders. WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, a
Краткое содержание страницы № 3
WebView Switches Table of Contents Chapter 1: Introduction 1 Welcome 1 What’s in this User Guide? 2 Chapter 2: Getting to Know the Switch 3 Overview 3 The Front Panel 3 The Back Panel 4 Chapter 3: Connecting the Switch 5 Overview 5 Before You Install the Switch... 6 Placement Options 6 Connecting the Switch 7 Chapter 4: Using the Console Interface for Configuration 9 Overview 9 Configuring the HyperTerminal Application 9 Connecting to the Switch through a Telnet Session 10 Configuring the Switch
Краткое содержание страницы № 4
WebView Switches Switch Conf. (Configuration) Tab - IGMP Snooping 34 Switch Conf. (Configuration) Tab - Bridge Multicast 35 Switch Conf. (Configuration) Tab - Bridge Multicast Forward All 36 QoS Tab - CoS Settings 37 QoS Tab - Queue Settings 38 QoS Tab - CoS to Queue 38 QoS Tab - Bandwidth 39 Security Tab - Local Users/System Password 40 Security Tab - 802.1x Users 40 Security Tab - 802.1x Port Conf. (Configuration) 41 Security Tab - RADIUS Server 43 Security Tab - Storm Control 45 Security Tab
Краткое содержание страницы № 5
WebView Switches Maintenance Tab - Telnet 82 Maintenance Tab - Reset 82 Maintenance Tab - File Download 82 Maintenance Tab - File Upload 83 Maintenance Tab - Restore Defaults 84 Maintenance Tab - Integrated Cable Test 84 Maintenance Tab - HTTP File Download 85 Spanning Tree Tab - Global Settings 86 Spanning Tree Tab - STP Interface Settings 88 Spanning Tree Tab on SRW2048 Switches - RSTP Interface Settings 90 Spanning Tree Tab on SRW2048 Switches - MSTP Properties 92 Spanning Tree Tab on SRW2048
Краткое содержание страницы № 6
WebView Switches List of Figures Figure 2-1: Front Panel of the 16-Port Switch 3 Figure 2-2: Back Panel of the 16-Port Switch 4 Figure 3-1: Typical Network Configuration for the 16-Port Switch 5 Figure 3-2: Attach the Brackets to the Switch 7 Figure 3-3: Mount the Switch in the Rack 7 Figure 4-1: Finding HyperTerminal 9 Figure 4-2: Connection Description 9 Figure 4-3: Connect To 9 Figure 4-4: COM1 Properties 10 Figure 4-5: Telnet Login screen 10 Figure 4-6: Switch Main Menu 11 Figure 4-7: Port S
Краткое содержание страницы № 7
WebView Switches Figure 4-24: Network Configuration 18 Figure 4-25: Ping Test 18 Figure 4-26: TraceRoute Test 18 Figure 4-27: File Management 19 Figure 4-28: Restore System Default Settings 19 Figure 4-29: Reboot System 19 Figure 5-1: Login Screen 20 Figure 5-2: System Information - System Description 21 Figure 5-3: System Information - System Mode 21 Figure 5-4: System Information - Forwarding Database 22 Figure 5-5: Forwarding Database - Add Entry 22 Figure 5-6: System Information - Time Synch
Краткое содержание страницы № 8
WebView Switches Figure 5-25: Switch Configuration - Bridge Multicast Forward All 36 Figure 5-26: QoS - CoS Settings 37 Figure 5-27: QoS - Queue Settings 38 Figure 5-28: QoS - CoS to Queue 38 Figure 5-29: QoS - Bandwidth 39 Figure 5-30: QoS - Edit Bandwidth 39 Figure 5-31: Security - Local Users/System Password 40 Figure 5-32: Security - Edit Local Users/System Password 40 Figure 5-33: Security - 802.1x Users 40 Figure 5-34: Security - 802.1x Port Configuration 41 Figure 5-35: 802.1x Port Config
Краткое содержание страницы № 9
WebView Switches Figure 5-55: Statistics - Etherlike Statistics 59 Figure 5-56: Statistics - RMON Statistics 60 Figure 5-57: Statistics - RMON History Control 62 Figure 5-58: Statistics - RMON History Log 63 Figure 5-59: Statistics - RMON Alarms 64 Figure 5-60: Statistics - add RMON Alarm entry 65 Figure 5-61: Statistics - RMON Events Control 66 Figure 5-62: Statistics - RMON Events Log 67 Figure 5-63: Statistics - EAP Statistics 68 Figure 5-64: Statistics - GVRP Statistics 69 Figure 5-65: Logs
Краткое содержание страницы № 10
WebView Switches Figure 5-85: Maintenance - HTTP File Download 85 Figure 5-86: Spanning Tree - Global Settings 86 Figure 5-87: Spanning Tree - STP Interface Settings 88 Figure 5-88: Spanning Tree - RSTP Interface Settings 90 Figure 5-89: Spanning Tree - MSTP Properties 92 Figure 5-90: Spanning Tree - MSTP Instance Settings 93 Figure 5-91: Spanning Tree - MSTP Interface Settings 94
Краткое содержание страницы № 11
WebView Switches Chapter 1: Introduction Welcome Thank you for choosing a WebView Switch. This Switch will allow you to network better than ever. This new Linksys rackmount switch delivers non-blocking, wire speed switching for your 10, 100, and 1000Mbps network clients, plus multiple options for connecting to your network backbone. 16 or 24, 10/100/1000 ports wire up your workstations or connect to other switches and the backbone. And the mini-GBIC ports allow future expansion to alternate t
Краткое содержание страницы № 12
WebView Switches What’s in this User Guide? This user guide covers the steps for setting up and using the Switch. Chapter 1: Introduction This chapter describes the Switch’s applications and this User Guide. Chapter 2: Getting to Know the Switch This chapter describes the physical features of the Switch. Chapter 3: Connecting the Switch This chapter explains how to install and connect the Switch. Chapter 4: Using the Console Interface for Configuration This chapter instructs you on how t
Краткое содержание страницы № 13
WebView Switches Chapter 2: Getting to Know the Switch Overview The Switches differ in number and types of LEDs and ports. While the 16-Port Gigabit Ethernet Switch is pictured in this chapter, the other Switches are similar in form and function. The Front Panel The Switch's LEDs and ports are located on the front panel. Figure 2-1: Front Panel of the 16-Port Switch LEDs SYSTEM Green. The SYSTEM LED lights up to indicate that the Switch is powered on. Link/Act Green. The Link/Act LED lights up
Краткое содержание страницы № 14
WebView Switches For the 16-Port Switch, ports 8 and 16 are shared with miniGBIC1 and miniGBIC2, respectively. For the 24-Port Gigabit Ethernet Switch, ports 12 and 24 are shared with miniGBIC1 and miniGBIC2, respectively. NOTE: If shared ports are both connected, then the miniGBIC port has priority. miniGBIC1/2 The Switch provides two mini-GBIC ports. The mini-GBIC (gigabit interface converter) port is a connection point for a mini-GBIC expansion module, so the Switch can be uplinked via fi
Краткое содержание страницы № 15
WebView Switches Chapter 3: Connecting the Switch Overview This chapter will explain how to connect network devices to the Switch. For an example of a typical network configuration, see the application diagram shown below. Figure 3-1: Typical Network Configuration for the 16-Port Switch When you connect your network devices, make sure you don’t exceed the maximum cabling distances, which are listed in the following table: Table 1: Maximum Cabling Distances From To Maximum Distance Switch Switc
Краткое содержание страницы № 16
WebView Switches Before You Install the Switch... When you choose a location for the Switch, observe the following guidelines: Make sure that the Switch will be accessible and that the cables can be easily connected. Keep cabling away from sources of electrical noise, power lines, and fluorescent lighting fixtures. Position the Switch away from water and moisture sources. To ensure adequate air flow around the Switch, be sure to provide a minimum clearance of two inches (50 mm). Do no
Краткое содержание страницы № 17
WebView Switches Rack-Mount Placement IMPORTANT: Make sure you use the screws supplied with the mounting brackets. Using the To mount the Switch in any standard-sized, 19-inch wide, 1U high rack, follow these instructions: wrong screws could damage the Switch and would invalidate your warranty. 1. Place the Switch on a hard flat surface with the front panel facing you. 2. Attach a rack–mount bracket to one side of the Switch with the supplied screws. Then attach the other bracket to the othe
Краткое содержание страницы № 18
WebView Switches 8. Power on the network devices connected to the Switch. Each active port’s corresponding Link/Act LED will light up on the Switch. If a port has an active Gigabit connection, then its corresponding Gigabit LED will also light up. If you will use the Switch’s console interface to configure the Switch, proceed to Chapter 4: Using the Console Interface for Configuration for directions. If you will use the Switch’s Web-based Utility to configure the Switch, proceed to Chapter 5:
Краткое содержание страницы № 19
WebView Switches Chapter 4: Using the Console Interface for Configuration Overview The Switch features a menu-driven console interface for basic configuration of the Switch and management of your network. The Switch can be configured using CLI through the console interface or through a telnet connection. This chapter describes console interface configuration. Configuration can also be performed through the web utility, which is covered in the next chapter. Configuring the HyperTerminal Applic
Краткое содержание страницы № 20
WebView Switches 4. Set the serial port settings as follows: Bits per second: 38400 Data bits: 8 Parity: None Stop bits: 1 Flow control: None Then, click the OK button. Figure 4-4: COM1 Properties Connecting to the Switch through a Telnet Session Open a command line editor and enter telnet 192.168.1.254. Then, press the Enter key. The Login screen will now appear. The first time you open the CLI interface, select Edit and enter admin in the User Name field. Leave the Password field blank. Press
