Краткое содержание страницы № 1
Cajun™ P880
Switch
Installation
Guide
January 2000
VERSION 1.0
Краткое содержание страницы № 2
Cajun P880 Routing Switch Installation Guide V1.0 © Copyright LUCENT TECHNOLOGIES 2000 ALL RIGHTS RESERVED Printed in USA, January 2000 The products, specifications, and other technical information regarding the products contained in this document are subject to change without notice. All information in this document is believed to be accurate and reliable, but is presented without warranty of any kind, express or implied, and users must take full responsibility for their application of any p
Краткое содержание страницы № 3
Table of Contents Preface Overview of The Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Documentation Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Online Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Re
Краткое содержание страницы № 4
Chapter 2 — Configuring the Cajun P880 Switch Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1 50 Series Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1 80 Series Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2 Terminal Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3 Configuring the Supervisor Module Using the CLI . . . . . . . . . . 2 - 3
Краткое содержание страницы № 5
Configuring Redundant Hardware . . . . . . . . . . . . . . . . . . . 2 - 47 Checking for Proper Installation . . . . . . . . . . . . . . . . . . . 2 - 48 Replacing the Primary Controller . . . . . . . . . . . . . . . . . . 2 - 49 Replacing an Element . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 50 Performing a System Reset . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 51 Managing Configuration Files . . . . . . . . . . . . . . . . . . . . . . . . 2 - 51 Viewing Your Runni
Краткое содержание страницы № 6
Cajun P880 Switch Installation Guide vi
Краткое содержание страницы № 7
Preface This guide explains how to install, configure, and operate the Lucent P880 Cajun Switch. It also includes information on the Command Line Interface (CLI) and information on downloading new operational code to your switch. Overview of The Contents This guide contains the following chapters: Chapter 1, Installing the Cajun P880 Switch - Explains how to unpack and assemble your switch. Chapter 2, Configuring the Cajun P880 Switch - Explains how to perform the initial configuration of y
Краткое содержание страницы № 8
Online Documentation Lucent Technologies maintains copies of all technical documentation on the corporate web server. To access online documentation, including HTML and PDF documents, use Netscape Navigator version 3.x or above or Internet Explorer version 3.x or above and type the URL: http://pubs.lucentctc.com/ Conventions This document uses the following conventions: Convention Represents Examples User Input User entered text. To create a new password, type store password owl Emphasis A
Краткое содержание страницы № 9
Indicates a condition that may cause injury if warning is ignored. WARNING Audience This guide is intended for the following people at your site: ■ Network manager or administrator ■ Hardware installer Related Documents This section provides information on supporting documentation, including: ■ Lucent Documents ■ Reference Documents Lucent Documents The following documents provide additional information on supporting Lucent’s Cajun Family of products: Lucent CajunView User’s Guide - Describes
Краткое содержание страницы № 10
■ Routing in the Internet — Christian Huitema, ISBN 0-13- 132192-7 ■ Interconnections: Bridges and Routers — Radia Perlman, ISBN 0- 201-56332-0 Contacting Lucent Corporation For information about Lucent Data Networking products and services, please consult the Lucent World Wide Web site at: http://www.lucent.com If you have any questions, please call Technical Support: Within the United States - 1-800-237-0016, press 0 at the prompt, then dial ext. 73300. From outside the United States - 1-8
Краткое содержание страницы № 11
Installing the Cajun P880 1 Switch Overview This chapter describes: ■ Verifying the System Components ■ Installing the System ■ Selecting a Location ■ Installing the System ■ Installing/Removing Power Supplies ■ Installing/Removing Fan Assemblies Verifying the System Components To unpack the system, check for the following components: ■ Chassis, including: — Power supplies (installed in the switch) — Fan trays — Supervisor module (installed in the switch) — Blank faceplates ■ I/O modules (shipp
Краткое содержание страницы № 12
1 ■ Power cords (one for each power supply) ■ 10Base-T crossover cable (for connecting to Ethernet Console Port) ■ Out-of-Band connection kit, including: — Male DCE-to-RJ-45 connector (connects to switch) — Female DTE-to-RJ-45 connector (connects to computer) — Male DTE-to-RJ-45 null modem connector (connects to a modem) — Straight-through RJ-45 cable for connecting between connectors ■ Product documentation ■ Options (as ordered) Unpack the shipment and report any lost or damaged items to yo
Краткое содержание страницы № 13
Selecting a Location The location you select for installing the system hardware must meet the following requirements: ■ 19-inch EIA-standard grounded rack or table capable of supporting at least 154 kg (340 lb). A fully-loaded switch weighs 77 kg (170 lbs). ■ At least 2 inches (5.2 cm) on either side of the chassis, and from the front and rear of the chassis, to allow adequate airflow through the chassis (Figure1). Figure 1. Air Flow Requirements ■ AC power source(s) within 2 m (9 ft) (sep
Краткое содержание страницы № 14
1 Required Tools and Hardware The following items are required for installing the Cajun P880: ■ ESD grounding strap and an antistatic mat ■ Screws and nuts (#10-32 recommended depending on the type of rack used) ■ Phillips head screwdrivers (type 1 tip) ■ Tape measure and a level (to check for squareness of rack and mounting shelf) Installing the System The process for installing the system requires the following tasks: 1. Preventing Electrostatic Discharge 2. Installing the Mounting Shelf 3.
Краткое содержание страницы № 15
2. Lay out the static-dissipative work surface. 3. Connect the ground cord assembly to the ESD mat and to the ground plug on the front fan tray. This takes a standard banana jack or a #10-32 screw. 4. Wear the ESD wrist strap and attach it to the ground cord assembly. Installing the Mounting Shelf * Note: The screws and nuts needed to attach the shelf to the rack are not supplied. It is recommended you use, at least, a quantity of three #10 pan head screws for installation. There are thre
Краткое содержание страницы № 16
1 Installing the Chassis The system can be installed by rack mounting the system. Rack Mounting the * Note: It is recommended that you remove the power supplies System prior to rack mounting the Cajun P880. You can use an empty power supply slot as a hand-hold when lifting the chassis. Chassis weights are: ■ The Cajun P880 chassis with one supervisor, no media modules or power supplies weighs 39kg (85 lbs.). ■ The Cajun P880 chassis containing one supervisor, three power supplies and no m
Краткое содержание страницы № 17
3. With one person at each side of the chassis, use the empty power supply slots as hand-grips, and lift the chassis onto the shelf. Slide it back until it is securely seated on the shelf (Figure 3). 4. Align the mounting holes on the chassis mounting ears (identified by screw icon) with the mounting holes on the rack and secure the chassis to the mounting shelf and rack rails (screw holes marked with icon) using a quantity of ten, #10 pan head (minimum recommended size) screws (not suppli
Краткое содержание страницы № 18
1 8. Install the cable management bracket (see "Installing the Cable Management Bracket" for more information). 9. Attach the plastic trim pieces on the front of the chassis (Figure 4) (line up the trim piece with the ball studs on the chassis, the finger pulls turned outward, and clip into place). Figure 4. Attaching the Trim Pieces Finger Pulls Cajun P880 Routing Switch Installation Guide 1 - 8
Краткое содержание страницы № 19
Installing/Removing Power Supplies You can replace power supplies without shutting down power to the Cajun P880. However, you must turn off the power to the power supply you are replacing. CAUTION Each power supply powers approximately nine I/O modules. You need a minimum of two power supplies if you have more than 10 modules in the chassis. It takes two power supplies to power a full chassis. Using three power supplies ensures that the system has redundant power capabilities. Use Table 1
Краткое содержание страницы № 20
1 2. After taking appropriate antistatic precautions, carefully remove the supply from the antistatic wrap. (Refer to "Preventing Electrostatic Discharge" for more information on proper antistatic precautions). 3. Make sure that the ON/OFF switch on the power supply is OFF. (O) 4. Remove the filler panel from the power supply bay. You can insert new power supplies into any available bay. (Figure 6). 5. Insert the supply into the chassis and slide it in until it is firmly seated (Figure 5).
