Краткое содержание страницы № 1
ProSafe M4100 and M7100
Managed Switches
Software Administration Manual
10.0.1
350 East Plumeria Drive
San Jose, CA 95134
USA
February 2013
202-11161-01
Краткое содержание страницы № 2
ProSafe M4100 and M7100 Managed Switches Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. For product updates and web support, visit http://support.netgear.com. Phone (US & Canada only): 1-888-NETG
Краткое содержание страницы № 3
Table of Contents Chapter 1 Documentation Resources Chapter 2 VLANs Create Two VLANs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 CLI: Create Two VLANS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Web Interface: Create Two VLANS . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Assign Ports to VLAN2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 CLI: Assign Ports to VLAN2 . . . . . .
Краткое содержание страницы № 4
ProSafe M4100 and M7100 Managed Switches Map Private-VLAN Promiscuous Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 CLI: Map Private-VLAN Promiscuous Port. . . . . . . . . . . . . . . . . . . . . . . 52 Web Interface: Map Private-VLAN Promiscuous Port . . . . . . . . . . . . . . 52 Chapter 3 LAGs Create Two LAGs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 CLI: Create Two LAGs . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 5
ProSafe M4100 and M7100 Managed Switches CLI: Enable RIP on the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 Web Interface: Enable RIP on the Switch. . . . . . . . . . . . . . . . . . . . . . . .79 RIP for Ports 1/0/2 and 1/0/3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 CLI: Enable RIP for Ports 1/0/2 and 1/0/3 . . . . . . . . . . . . . . . . . . . . . . .80 Web Interface: Enable RIP for Ports 1/0/2 and 1/0/3 . . . . . . . . . . . . . . .
Краткое содержание страницы № 6
ProSafe M4100 and M7100 Managed Switches Chapter 10 ACLs MAC ACLs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 IP ACLs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 ACL Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 Set Up an IP ACL with Two Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 CLI: Set Up an IP ACL with Two
Краткое содержание страницы № 7
ProSafe M4100 and M7100 Managed Switches Configure Traffic Shaping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197 CLI: Configure traffic-shape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198 Web Interface: Configure Traffic Shaping. . . . . . . . . . . . . . . . . . . . . . .198 Chapter 12 DiffServ DiffServ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201 CLI: Configure DiffServ. . . . . .
Краткое содержание страницы № 8
ProSafe M4100 and M7100 Managed Switches CLI: Configure MVR in Compatible Mode . . . . . . . . . . . . . . . . . . . . . . 257 Web Interface: Configure MVR in Compatible Mode . . . . . . . . . . . . . . 259 Configure MVR in Dynamic Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263 CLI: Configure MVR in Dynamic Mode. . . . . . . . . . . . . . . . . . . . . . . . . 263 Web Interface: Configure MVR in Dynamic Mode . . . . . . . . . . . . . . . . 265 . . . . . . . . . . . . . . .
Краткое содержание страницы № 9
ProSafe M4100 and M7100 Managed Switches Web Interface: Configure Dynamic ARP Inspection. . . . . . . . . . . . . . .313 Chapter 16 SNTP Show SNTP (CLI Only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .317 show sntp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .317 show sntp client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .318 show sntp server. . . . . . . . . . . . . . . . .
Краткое содержание страницы № 10
ProSafe M4100 and M7100 Managed Switches Web Interface: Show Logging Buffered . . . . . . . . . . . . . . . . . . . . . . . . 343 Show Logging Traplogs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343 CLI: Show Logging Traplogs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 343 Web Interface: Show Logging Trap Logs . . . . . . . . . . . . . . . . . . . . . . . 343 Show Logging Hosts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 11
ProSafe M4100 and M7100 Managed Switches Chapter 20 SNMP Add a New Community. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .369 CLI: Add a New Community . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .369 Web Interface: Add a New Community. . . . . . . . . . . . . . . . . . . . . . . . .370 Enable SNMP Trap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .370 CLI: Enable SNMP Trap . . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 12
ProSafe M4100 and M7100 Managed Switches CLI: Create a Private VLAN Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . 403 Web Interface: Create a Private VLAN Group . . . . . . . . . . . . . . . . . . . 404 Chapter 25 Spanning Tree Protocol Configure Classic STP (802.1d). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 408 CLI: Configure Classic STP (802.1d) . . . . . . . . . . . . . . . . . . . . . . . . . . 408 Web Interface: Configure Classic STP (802.1d). . . . . .
Краткое содержание страницы № 13
ProSafe M4100 and M7100 Managed Switches Chapter 29 DHCP L2 Relay and L3 Relay DHCP L2 Relay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .488 CLI: Enable DHCP L2 Relay. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .489 Web Interface: Enable DHCP L2 Relay . . . . . . . . . . . . . . . . . . . . . . . .490 DHCP L3 Relay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .494 Configure the DHCP Server Sw
Краткое содержание страницы № 14
ProSafe M4100 and M7100 Managed Switches CLI: Set iSCSI Target Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 554 Web Interface: Set iSCSI Target Port. . . . . . . . . . . . . . . . . . . . . . . . . . 554 Show iSCSI Sessions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 555 CLI: Show iSCSI Sessions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 555 Web Interface: Show iSCSI Sessions . . . . . . . . . . . . . . . .
Краткое содержание страницы № 15
1. Documentation Resources 1 Before installation, read the Release Notes for this switch product. The Release Notes detail the platform-specific functionality of the switching, routing, SNMP, configuration, management, and other packages. In addition, see the following publications: • The NETGEAR installation guide for your switch • Managed Switch Hardware Installation Guide • Managed Switch Software Setup Manual • ProSafe Managed Switch Command Line Interface (CLI) User Manu
Краткое содержание страницы № 16
2. VLANs 2 Virtual LANs This chapter provides the following examples: • Create Two VLANs on page 17 • Assign Ports to VLAN2 on page 19 • Create Three VLANs on page 20 • Assign Ports to VLAN3 on page 22 • Assign VLAN3 as the Default VLAN for Port 1/0/2 on page 24 • Create a MAC-Based VLAN on page 25 • Create a Protocol-Based VLAN on page 28 • Virtual VLANs: Create an IP Subnet–Based VLAN on page 31 • Voice VLANs on page 33 • Private VLANs on page 44
Краткое содержание страницы № 17
ProSafe M4100 and M7100 Managed Switches The Private Edge VLAN feature lets you set protection between ports located on the switch. This means that a protected port cannot forward traffic to another protected port on the same switch. The feature does not provide protection between ports located on different switches. The diagram in this section shows a switch with four ports configured to handle the traffic for two VLANs. Port 1/0/2 handles traffic for both VLANs, while port 1/0/1 is a membe
Краткое содержание страницы № 18
ProSafe M4100 and M7100 Managed Switches Web Interface: Create Two VLANS 1. Create VLAN2. a. Select Switching > VLAN > Basic > VLAN Configuration. A screen similar to the following displays. b. Enter the following information: • In the VLAN ID field, enter 2. • In the VLAN Name field, enter VLAN2. • In the VLAN Type list, select Static. c. Click Add. 2. Create VLAN3. a. Select Switching > VLAN > Basic > VLAN Configuration. A screen similar to the following displays. b. Enter the
Краткое содержание страницы № 19
ProSafe M4100 and M7100 Managed Switches Assign Ports to VLAN2 This sequence shows how to assign ports to VLAN2, and to specify that frames will always be transmitted tagged from all member ports and that untagged frames will be rejected on receipt. CLI: Assign Ports to VLAN2 (Netgear Switch) #config (Netgear Switch) (Config)#interface range 1/0/1-1/0/2 (Netgear Switch) (conf-if-range-1/0/1-1/0/2)#vlan participation include 2 (Netgear Switch) (conf-if-range-1/0/1-1/0/2)#vlan acceptframe vlano
Краткое содержание страницы № 20
ProSafe M4100 and M7100 Managed Switches A screen similar to the following displays. b. Under PVID Configuration, scroll down and select the check box for Interface 1/0/1. Then scroll down and select the Interface 1/0/2 check box. c. Enter the following information: • In the Acceptable Frame Type polyhedron list, select VLAN Only. • In the PVID (1 to 4093) field, enter 2. d. Click Apply to save the settings. Create Three VLANs The example is shown as CLI commands and as a Web interface
