Краткое содержание страницы № 1
FULL MANUAL
OPERATING INSTRUCTIONS
DIRECT DRIVE TURNTABLE
T.8O
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Краткое содержание страницы № 2
IMPORTANT SAFETY INSTRUCTIONS 1. Read these Instructions – All the safety and operating instructions should be read before this product is operated. 2. Keep these Instructions – The safety and operating instructions should be retained for future reference. 3. Heed all Warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all Instructions – All operating and use instructions should be followed. 5. WARNING: To reduce the risk of fire or el
Краткое содержание страницы № 3
IMPORTANT SAFETY INSTRUCTIONS 21. Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 22. Replacement Parts – When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the s
Краткое содержание страницы № 4
ASSEMBLY Remove all the parts from the box. Please check to make sure the following items are included with the main unit in the carton: (1) Platter (2) Slip mat (3) Counterweight (4) 45-rpm adapter (5) 500B Cartridge and Headshell (6) AC cord (7) RCA cable (8) Target light (9) Operating instructions (10) Cloth dust cover CONNECTIONS 1) Connect the power cord to an AC outlet. 2) Connect the RCA cable to the PHONO input of your mixer. You can also use a line input by setting
Краткое содержание страницы № 5
PART NAMES & FUNCTIONS 18 17 1 2 16 15 3 4 14 5 13 12 11 6 10 2 7 8 9 1) REVERSE This button is used to reverse the direction of the platter rotation. 2) START/STOP Press this button to start or stop the platter. 3) STROBE DOTS The dots around the edge of the platter are used in conjunction with the light located inside the motor ON/OFF switch. While the platter is in rotation, the dots help to indicate the speed of rotation. The speed is lower than the displayed speed (33,45,7
Краткое содержание страницы № 6
PART NAMES & FUNCTIONS 8) TARGET LIGHT BASE Insert target light to the deck and it will light up. 9) KEY LOCK Press to enable Key Lock. When Key Lock is on, the pitch slider will only affect the speed of the platter. The key (tone) will remain at 0%. Note: Key Lock processing is only available when the LINE output is used. 10) PITCH LOCK The ON setting will allow use of the pitch adjust. When set of OFF, the pitch control will be locked at 0%. 11) PITCH SLIDER The pitch slider is
Краткое содержание страницы № 7
PART NAMES & FUNCTIONS 20) PHONO/LINE SWITCH Note: Key Lock and Digital output processing is only available when the LINE output is used. 21) DIGITAL OUT Use this output to connect your T.80 to any SPDIF in equipped digital device. 22) POWER CORD CONNECTOR Used to connect the included power cord. 23) POWER SWITCH This switch turns the power on or off, including the motor and audio signal. SPECIFICATIONS APPLICATION: This specification applies to the direct drive turntable uni
Краткое содержание страницы № 8
SPECIFICATIONS GENERAL SECTION: Power Supply AC 100V, 50/60Hz (For Japan) AC 110V, 60Hz (For Taiwan) AC 120V, 60Hz (For U.S.A.,Canada,Mexico) AC 220V, 50Hz (For United Arab Emirates,Chile,Argentina) AC 220V, 60Hz (For Philippines) AC 230V, 50Hz (For Europe,New Zealand,South Africa,Singapore,Israel) AC 240V, 50Hz (For Australia,U.K.) Power Consumption 10 Watts Dimensions 452 (W) x 370 (D) x 86 (H) mm Weight 8.6 Kgs
Краткое содержание страницы № 9
Stanton Magnetics, Inc. – Warranty Provision – Returns for Repairs or Replacement WARRANTY Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’s authorized distributors outside the U.S., will, without charge, repair or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved defective in material or workmanship for a period of one (1) year following the date of original purchase. E
Краткое содержание страницы № 10
cut along dotted line STANTON WARRANTY REGISTRATION CARD If you have internet access, please register your product at www.stantondj.com. Otherwise, return this card completely filled out in order to validate your warranty. PERSONAL INFO Name Address City State Zip Country Telephone PRODUCT INFO Model Number Serial Number Date of Purchase Where did you buy this product?
Краткое содержание страницы № 11
PLACE STAMP HERE Stanton Magnetics, Inc. 3000 SW 42nd Street Hollywood, FL 33312 U.S.A.
