Руководство по эксплуатации Peerless-Premier PLP UN-1

Краткое содержание страницы № 1

Installation and Assembly -
Model:
Solid•Point™ Universal Adapter bracket for Large Flat Panel Screens
PLP UN-1
PARTS LIST
Parts List
BB
PART # QTY. DESCRIPTION
AA 200-0333 1 adapter bracket
CC
AA
BB 200-1302 2 vertical bracket
CC 520-1151 4 10-32 x 3/8" serrated head socket pin screw
DD 540-9440 6 1/4" washer
EE 520-1050 6 M6 x 1 x 12 mm socket pin screw
FF 520-1064 8 M5 x .8 x 12 mm socket pin screw
GG 520-1156 8 M4 x .7 x 10 mm serrated socket pin screw
KK
HH 520-1068 6 M8 x 1.25 x 15mm socke

Краткое содержание страницы № 2

Slide vertical brackets (BB) onto c-channels as shown below. Refer to the table on the last page of the screen 1 compatibility chart to determine the proper assembly of the vertical bracket (BB). For standard bracket mounting, see figure 3. For reverse bracket mounting, see figure 4. Example: For a Toshiba model 50 HP82 50" screen, assemble the vertical bracket (BB) as shown in figure 4 below (reverse bracket mounting). BB c-channel AA BB fig. 3 Bracket Mounting: Standard c-channel AA fig. 4 Bra

Краткое содержание страницы № 3

Set a cloth on the floor to prevent scratching the screen. Place the screen on the floor face down. If the screen has 2 knobs on the back, remove them. Place adapter bracket (AA) on the center of the screen. Slide the vertical brackets (BB) along the c-channels of the adapter bracket (AA) until the slots on the back of the vertical brackets (BB) are aligned to the holes on the back of the screen. Fasten vertical brackets (BB) to c-channels using four 10-32 x 3/8" serrated head socket pin screws

Краткое содержание страницы № 4

Slide the vertical brackets (BB) along the c-channels of the adapter bracket (AA) until the slots on the back of the 3 vertical brackets (BB) are aligned to the holes on the back of screen. Fully tighten the four 10-32 x 3/8" serrated head socket pin screws (CC) which hold the vertical brackets (BB) to the c-channels. Refer to the accompanying screen compatibility chart to determine the proper fasteners to use. Attach the assembled adapter bracket to the back of the screen using screws, upper an