Краткое содержание страницы № 1
CASSETTE RECEIVER
РЕСИВЕР С КАССЕТНЫМ ПРОИГРЫВАТЕЛЕМ
KS-T807/KS-T707
KS-T807
KS-T707
For installation and connections, refer to the separate manual.
Указания по установке и выполнению соединений приводятся в отдельной инструкции.
В соответствии с Законом Российской Федерации “О защите прав потребителей” срок службы
(годности) данного товара “по истечении которого он может представлять опасность для жизни,
здоровья потребителя, причинять вред его имуществу или окружающей среде” составляет семь (7
Краткое содержание страницы № 2
How to reset your unit After detaching the control panel, press the reset button on the panel holder using a ball-point pen or a similar tool. This will reset the built-in microcomputer. Note: Your preset adjustments—such as preset channels or sound adjustments—will also be erased. How to use the M MODE button If you press M MODE, the unit goes into functions mode, then the number buttons work as different function buttons. • When connecting a JVC MP3-compatible CD changer: The 5/∞ buttons will
Краткое содержание страницы № 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 OTHER MAIN FUNCTIONS ................ 23 How to use the M MODE button ............... 2 Changing the general settings (PSM) ....... 23 Changing the standard plate LOCATION OF THE BUTTONS ............ 4 (only for KS-T807) ...................
Краткое содержание страницы № 4
LOCATION OF THE BUTTONS Control panel Display window d fghj kl/ z xcv b n m 123 4 5 6 78 9 p q w e r tyui o ; a s 1 Remote sensor ; T TP/PTY (traffic programme/programme 2 Control dial type) button 3 (standby/on/attenuator) button a TAPE CD-CH (CD changer) button 4 SEL (select) button s∞ (down) button 5 Screws—M2 × 5 mm (only for KS-T807) 6 Plate cover and standard plate Display window (only for KS-T807) d LOUD (loudness) indicator 7 FM/AM DAB button f EQ (equalizer) indicator 85 (up) button g (
Краткое содержание страницы № 5
BASIC OPERATIONS * The control panel illustrations used for explanation in this manual is KS-T707. 1 3 2 Turning on the power 3 Adjust the volume. 1 Turn on the power. To increase the volume To decrease the volume Note on One-Touch Operation: When you select a source in step 2 below, the Volume (or audio) level indicator power automatically comes on. You do not have (see page 25) to press this button to turn on the power. 2 Select the source. Volume level appears. 4 Adjust the sound as you want.
Краткое содержание страницы № 6
Setting the clock 5 Finish the setting. You can also set the clock system to either 24 hours or 12 hours. 1 Press and hold SEL (select) for more than 2 seconds so that one of the To check the current clock time or change the PSM items appears on the display. display mode (PSM: see page 24.) Press DISP (display) repeatedly. Each time you press the button, the display mode changes as follows: • During tuner operation: 2 Set the hour. Frequency Clock 1 Select “CLOCK H” (hour) if not shown on • For
Краткое содержание страницы № 7
RADIO OPERATIONS Listening to the radio 2 Start searching for a station. To search for stations of You can use either automatic searching or manual higher frequencies searching to tune in to a particular station. Searching for a station automatically: Auto search To search for stations of lower frequencies 1 Select the band (FM1 – 3, AM). When a station is received, searching stops. Each time you press the button, the band changes as To stop searching before a station is received, follows: press
Краткое содержание страницы № 8
Searching for a station manually: When an FM stereo broadcast is hard to receive: Manual search 1 Press M MODE to enter the 1 Select the band (FM1 – 3, AM). functions mode while listening to Each time you press the an FM stereo broadcast. button, the band changes as follows: 2 Press MO (monaural), while still in the functions mode, so that the FM1 FM2 FM3 AM MO indicator lights up on the display. Each time you press the button, Note: the MO indicator lights up and This receiver has three FM band
Краткое содержание страницы № 9
Manual preset Storing stations in memory You can preset up to 6 stations in each band You can use one of the following two methods to (FM1, FM2, FM3, and AM) manually. store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strong- Ex.: Storing FM station of 92.5 MHz into the station Sequential Memory) preset number 1 of the FM1 band. • Manual preset of both FM and AM stations 1 Select the band (FM1 – 3, AM) you FM station automatic preset: SSM want to store stations into
Краткое содержание страницы № 10
Tuning in to a preset station 3 Press and hold the number button (in this example, 1) for more than 2 You can easily tune in to a preset station. seconds. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on pages 9 and 10. 1 Select the band (FM1 – 3, AM). Each time you press the button, the band changes as follows: Preset number flashes for a while FM1 FM2 FM3 AM 4 Repeat the above procedure to store other stations into other preset 2
Краткое содержание страницы № 11
RDS OPERATIONS To use Network-Tracking Reception What you can do with RDS You can select the different modes of network- RDS (Radio Data System) allows FM stations to tracking reception to continue listening to the send an additional signal along with their regular same programme in its finest reception. programme signals. For example, the stations When shipped from the factory, “AF” is selected. send their station names, as well as information about what type of programme they broadcast, • AF:
Краткое содержание страницы № 12
Using TA Standby Reception 1 Press and hold SEL (select) for more than 2 seconds so that one of the TA Standby Reception allows the unit to switch PSM items appears on the display. temporarily to Traffic Announcement (TA) from (PSM: see page 24.) the current source (another FM station, tape, or other connected components). • TA Standby Reception will not work if you are listening to an AM station. Press T TP/PTY to activate TA Standby Reception. 2 Select “AF-REG” (alternative frequency/regionali
Краткое содержание страницы № 13
7 When the current source is FM, the PTY Using PTY Standby Reception indicator either lights up or flashes. PTY Standby Reception allows the unit to switch • If the PTY indicator lights up, PTY Standby temporarily to your favorite programme (PTY: Reception is activated. Programme Type) from the current source If a station starts broadcasting the selected (another FM station, tape, or other connected PTY programme, this unit automatically components). tunes in to the station. • If the PTY indicat
Краткое содержание страницы № 14
Searching your favorite programme 2 Select one of the twenty-nine PTY codes. (See page 17.) You can search any one of the PTY codes. In addition, you can store your 6 favorite Selected code name programme types in the number buttons. appears on the display. When shipped from the factory, the following 6 programme types have been stored in the number buttons (1 to 6). To store your favorite programme types, see below. 3 Press and hold the number button To search for your favorite programme type,
Краткое содержание страницы № 15
• If there is a station broadcasting a programme To search for your favorite programme type of the same PTY code as you have selected, that station is tuned in. 1 Press and hold T TP/PTY for more • If there is no station broadcasting a programme than 2 seconds while listening to an of the same PTY code as you have selected, FM station. the station will not change. Note: In some areas, the PTY search will not work correctly. Other convenient RDS functions and adjustments The last selected PTY cod
Краткое содержание страницы № 16
Changing the display mode while Setting the TA volume level listening to an FM station You can preset the volume level for TA Standby Reception. When a traffic programme is received, You can change the initial indication on the the volume level automatically changes to the display to station name (PS NAME), station preset level. frequency (FREQ), or clock time (CLOCK) while • See also “Changing the general settings listening to an FM RDS station. (PSM)” on page 23. • See also “Changing the gener
Краткое содержание страницы № 17
PTY codes NEWS: News SOCIAL: Programmes on social activities AFFAIRS: Topical programmes expanding RELIGION: Programmes dealing with any on current news or affairs aspect of belief or faith, or the INFO: Programmes which impart advice nature of existence or ethics on a wide variety of topics PHONE IN: Programmes where people can SPORT: Sport events express their views either by EDUCATE: Educational programmes phone or in a public forum DRAMA: Radio plays TRAVEL: Programmes about travel CULTURE:
Краткое содержание страницы № 18
TAPE OPERATIONS To stop play and eject the cassette Listening to a cassette Press 0. You can play back type I (normal) tapes. Tape play stops, the control panel flips down. The cassette automatically ejects from the cassette compartment. The source changes to the 1 Open the control panel. previously selected one. If you change the source, tape play also stops (without ejecting the cassette this time). • You can also eject the cassette by pressing 0 while the unit is turned off. Note on One-Touch
Краткое содержание страницы № 19
Finding the beginning of a tune Other convenient tape functions Multi Music Scan (MMS) allows you to automatically Skipping the blank portions on the tape start playback from the beginning of a specified You can skip blank portions between the tunes tune. You can specify up to 9 tunes ahead of or (Blank Skip). before the current tune. When this function is turned on, the unit fast- forwards (skipping blank portions of 15 seconds During playback or more), to the next tune and starts playback. • S
Краткое содержание страницы № 20
Playing the current tune repeatedly Prohibiting cassette ejection You can play the current tune repeatedly You can prohibit cassette ejection and lock a (Repeat Play). cassette in the cassette compartment. 1 Press M MODE to enter the While pressing TAPE CD-CH, press and functions mode while playing a hold for more than 2 seconds. tune you want to hear over again on a cassette. 2 Press RPT (repeat), while still in the functions mode, so that “NO EJECT” flashes on the display for about “REPEAT” a
