Руководство по эксплуатации GE E4

Руководство по эксплуатации для устройства GE E4

Устройство: GE E4
Категория: Водная система
Производитель: GE
Размер: 0.36 MB
Добавлено: 7/28/2014
Количество страниц: 33
Печатать инструкцию

Скачать

Как пользоваться?

Наша цель - обеспечить Вам самый быстрый доступ к руководству по эксплуатации устройства GE E4. Пользуясь просмотром онлайн Вы можете быстро просмотреть содержание и перейти на страницу, на которой найдете решение своей проблемы с GE E4.

Для Вашего удобства

Если просмотр руководства GE E4 непосредственно на этой странице для Вас неудобен, Вы можете воспользоваться двумя возможными решениями:

  • Полноэкранный просмотр -, Чтобы удобно просматривать инструкцию (без скачивания на компьютер) Вы можете использовать режим полноэкранного просмотра. Чтобы запустить просмотр инструкции GE E4 на полном экране, используйте кнопку Полный экран.
  • Скачивание на компьютер - Вы можете также скачать инструкцию GE E4 на свой компьютер и сохранить ее в своем архиве. Если ты все же не хотите занимать место на своем устройстве, Вы всегда можете скачать ее из ManualsBase.
GE E4 Руководство по эксплуатации - Online PDF
Advertisement
« Page 1 of 33 »
Advertisement
Печатная версия

Многие предпочитают читать документы не на экране, а в печатной версии. Опция распечатки инструкции также предусмотрена и Вы можете воспользоваться ею нажав на ссылку, находящуюся выше - Печатать инструкцию. Вам не обязательно печатать всю инструкцию GE E4 а только некоторые страницы. Берегите бумагу.

Резюме

Ниже Вы найдете заявки которые находятся на очередных страницах инструкции для GE E4. Если Вы хотите быстро просмотреть содержимое страниц, которые находятся на очередных страницах инструкции, Вы воспользоваться ими.

Краткое содержание
Краткое содержание страницы № 1

OSMONICS
TM
E4, E4LE, EZ4 SERIES
WATER PURIFICATION
MACHINES
INSTALLATION, OPERATION,
AND MAINTENANCE
MANUAL
GE Infrastructure
Water & Process Technologies

Краткое содержание страницы № 2

Краткое содержание страницы № 3

INSTALLATION, OPERATION AND MAINTENANCE MANUAL E4, E4LE, AND EZ4 SERIES WATER PURIFICATION MACHINES TABLE OF CONTENTS Page 2.0 INSTALLATION 1 2.1 Mounting the Unit 1 2.2 Plumbing 1 2.3 Installing Clean-In-Place Valves 2 2.4 Concentrate Outlet Connections 2 2.5 Feed Water Requirements 2 2.6 Transporting Pure Water (Permeate) to Point-of-Use 3 2.7 Pressure Correction Factors 4 2.8 Electrical 5 2.8.1 Single-Phase Electrical 5 2.8.2 Three-Phase Electrical 5 2.9 Machine Control 6 2.9.1 Economy Model

Краткое содержание страницы № 4

Page 2.17 Operation and Maintenance 16 2.17.1 Daily Flushing for the Economy Model 16 2.17.2 Daily Flushing for the Deluxe Model 16 2.18 Pre-Filter Cartridge 17 2.19 Membrane Element Cleaning 17 2.19.1 Step Wise Cleaning 17 2.19.2 Procedure to Clean with a CIP Pump 17 2.20 Suction Cleaning 19 2.21 Changing Out Membrane Elements 20 2.22 Troubleshooting 22 LIST OF FIGURES Figure Description 2.1 Three-Phase Allen Bradley Motor Starter 6 2.2 Setting-Up the Correct Time on the Autoflush Timer 11 2.3

Краткое содержание страницы № 5

Краткое содержание страницы № 6

2.0 INSTALLATION 2.1 Mounting the Unit When installing your new GE Infrastructure Water & Process Technologies reverse osmosis (RO) machine, allow at least 45-inches (114 cm) above the machine for mem- brane element removal and loading. If space is not available, the entire membrane element housing can be removed for membrane element change outs. If the mem- brane element housings are to be removed to change out the membrane elements, at least 6-inches (15.2 cm) is required at the end of each

Краткое содержание страницы № 7

2.3 Installing Clean-In-Place Valves NOTE: Clean-In-Place (CIP) valves are not included with the machine. The CIP valves must be purchased and installed by the customer. When installing the CIP valves, a three-way valve should be installed in the inlet feed stream of the machine. The tees on the permeate and concentrate lines should be installed with two-way valves. All valves should be installed in a manner that will allow circulation of the cleaning chemicals through the machine and back to

Краткое содержание страницы № 8

Table 2.2 E-Series Feed Water Requirements Temperature Typical: 50° - 85°F (10° - 29°C) Limits: 33° - 104°F (0.16° - 40°C) Inlet Pressure Minimum: 30 psig (2.1 barg) Maximum: 60 psig (4.1 barg) Chlorine 0 parts per million (ppm) (continuous feed) Operating pH 5.5 - 8.5 Silt Density Less than or equal to 5 to minimize Index (SDI) membrane element fouling and extend cleaning intervals. Refer to ASTM* standard D4189. * American Standard for Testing Materials 2.6 Transporting Pure Water (Permeate) t

Краткое содержание страницы № 9

2.7 Pressure Correction Factors It is often necessary to operate RO machines with permeate back pressure. Permeate back pressure will decrease permeate production. See Table 2.3 (Pressure Correction Factors) to calculate loss of permeate. Table 2.3 Pressure Correction Factors PRESSURE % LOSS OF CORRECTION BACK PRESSURE PERMEATE FLOW FACTOR (PCF) E4/EZ4 E4LE E4/EZ4 E4LE 10 psig (0.7 barg) 5% 10% 0.95 0.90 20 psig (1.4 barg) 10% 20% 0.90 0.80 30 psig (2.0 barg) 15% 30% 0.80 0.70 40 psig (2.7 bar

Краткое содержание страницы № 10

2.8 Electrical This RO machine requires two supply voltages; the control voltage and the pump motor voltage. 2.8.1 Single-Phase Electrical The control voltage can be connected to either a 115 VAC, 60 Hertz or 220 VAC, 50 Hertz single-phase power supply. The RO control circuit should always be installed on at least a 15 Amp, single-phase dedi- cated circuit. Reverse osmosis machines with 115 VAC, single-phase control voltage include an eight-foot (2.4 m) cord which plugs into a three-prong grou

Краткое содержание страницы № 11

Figure 2.1 Three-Phase Allen Bradley Motor Starter 2.9 Machine Control 2.9.1 Economy Model To remotely control the Economy Model (ECN) with float switches and/or pre- treatment lockout, remove the jumper between terminals 4 and 5 and wire in the float switches or pretreatment components in series. After all field wiring is complete and complies with local and national electrical codes, move onto Section 2.10 (Pretreatment for Water Purification). NOTE: External control contacts are normally clo

Краткое содержание страницы № 12

and complies with local and national electrical codes, move onto Section 2.10 (Pretreatment for Water Purification). NOTE: External control contacts are normally closed, dry contacts. 2.10 Pretreatment for Water Purification A water analysis of your feed water should have been performed, as part of the plan- ning and engineering that went into developing your RO system. The water analysis will provide information on what type of pretreatment may be required and what recovery the machine can be r

Краткое содержание страницы № 13

6. Turn the ON/OFF button on the machine ON. System will open allowing water to flow through the machine to the drain through the permeate and concen- trate CIP valves. Let the machine run to drain for 5 - 10 minutes. This provides a wet start-up of the pump and removes any air in the system. 7. Turn the ON/OFF button on the machine to the OFF position. 8. Re-energize the pump power and trigger the ON/OFF button on the machine to check rotation of the pump motor. Observing from the back of th

Краткое содержание страницы № 14

The concentrate valve is drilled, and when completely closed the machine is running at the correct concentrate flow for a 75% recovery (Table 2.4, Flow Specifications for E4-Series Machines). If the temperature of the inlet feed water is not 77°F (25°C) use the Temperature Correction Factor Table (Technote 113). The proper adjustment of the recycle and concentrate valves are critical to the correct operation of the machine. CAUTION: Optimum recovery will vary according to water quality. 2.13 T

Краткое содержание страницы № 15

2.14 Recovery The machine flow specifications listed below are based on 25°C (77°F). Table 2.4 Flow Specifications for E4-Series Machines E4-Series 2200 4400 6600 11000 13200 8800 Recovery 50-75% 50-75% 50-75% 50-75% 50-75% 50-75% Units LPM/GPM LPM/GPM LPM/GPM LPM/GPM LPM/GPM LPM/GPM Permeate Rate 5.8/11.6 11.6/3.06 17.3/4.6 23.1/6.1 28.9/7.6 34.7/9.2 Concentrate 5.8/11.6 11.6/3.06 17.3/4.6 23.1/6.1 28.9/7.6 34.7/9.2 Rate (50%) Concentrate 1.9/0.5 3.9/1.0 5.8/1.5 7.7/2.0 9.6/2.5 11.6/3.06 Rate (

Краткое содержание страницы № 16

2.15 Autoflush Timer 2.15.1 Programming the Autoflush Timer The Autoflush timer clock operates and displays in real time, but the Autoflush feature will only work when the RO machine is operating. When the machine is operating in the Autoflush Mode, the total flow through the machine is increased. This provides extra cross flow which flushes the loose foulants from the surface of the membrane elements. When the machine is operating in the Autoflush Mode a slight drop in permeate production,

Краткое содержание страницы № 17

STEPS 1. While holding down the Clock Key ( ), press the h key to advance to ⊗ the current minute. 2. While holding down the Clock Key ( ), press the h key to advance to ⊗ the current minute. 3. While holding down the Clock Key ( ), press the h key to advance to ⊗ the current minute. NOTE: If the h and m keys are held down for longer than 2 seconds, the numbers will advance rapidly. If the days are flashing, it indicates the day of the week was not set when setting the time. The timer cannot be

Краткое содержание страницы № 18

2.15.4 Programming Twenty-Four Hour or Seven Day Schedules NOTE: It is helpful to write out the program schedules before programming the time. Example: Figure 2.3 Programming the Timer 2.15.5 Changing a Program Select the program to be changed with the Prog. Key. A new set of days may be selected with the Day Key just as in the initial programming. Hour and minute can be changed with the h and m Keys. 2.15.6 Deleting a Program To delete one or a few programs: Press the Prog. Key until the de

Краткое содержание страницы № 19

2.15.7 Troubleshooting the Autoflush Timer PROBLEM: Days are flashing, pressing any Key does nothing except “Hand” Key turns output ON and OFF. SOLUTION: Time of Day and Day of Week have not been set. See Section 2.15.3 (Setting-Up the Autoflush Timer Clock). PROBLEM: Time of day was set while holding the Clock Key down, but days are still flashing. SOLUTION: Current day of week was not set while holding down the Clock Key. See Setting-Up the Autoflush Timer Clock (Section 2.15.2). PROBLEM: It

Краткое содержание страницы № 20

2.16 Calibrating the Conductivity Probe STEPS 1. Make sure the calibration meter is in Measure Mode (with the MEAS LED light ON). 2. Immerse the Conductivity Probe in a 13.00 microSiemens (mS) prepared solu- tion. 3. Immerse and agitate Conductivity Probe, and wait for the reading to stabilize. 4. Calibrate the meter by adjusting the CAL adjustment screw until the Liquid Crystal Display (LCD) display reads 13 mS of the solution. The meter is now calibrated NOTE: The alarm function on the conduct


Скачавание инструкции
# Руководство по эксплуатации Категория Скачать
1 GE 215C1044P010-3 Руководство по эксплуатации Водная система 6
2 GE 268 Руководство по эксплуатации Водная система 17
3 GE 263 Руководство по эксплуатации Водная система 10
4 GE 3020511 Руководство по эксплуатации Водная система 1
5 GE E2 Series Руководство по эксплуатации Водная система 2
6 GE 000 gpd to 288 Руководство по эксплуатации Водная система 0
7 GE E4H-CE Series, E8-CE Series Руководство по эксплуатации Водная система 8
8 GE E4H Series Руководство по эксплуатации Водная система 35
9 GE EZ2 Series Руководство по эксплуатации Водная система 0
10 GE E4LE Руководство по эксплуатации Водная система 0
11 GE E8-CE Руководство по эксплуатации Водная система 8
12 GE E4H-CE Руководство по эксплуатации Водная система 0
13 GE EZ4 Руководство по эксплуатации Водная система 5
14 GE Profile SmartWater ULTRA PLUS FQROPF Руководство по эксплуатации Водная система 4
15 GE SmartWater GXRTQR Руководство по эксплуатации Водная система 5
16 Sony 7 Руководство по эксплуатации Водная система 0
17 3Com ENTERPRISE OS 11.3 Руководство по эксплуатации Водная система 0
18 Acronis VIA C7-M Руководство по эксплуатации Водная система 0
19 Acronis 200 Series Руководство по эксплуатации Водная система 2
20 Acronis Z540 Руководство по эксплуатации Водная система 1