Краткое содержание страницы № 1
Conceptronic
(Wireless) Internet Camera
CNETCAM / C54NETCAM
User’s Guide
Version 1.0
Краткое содержание страницы № 2
Table of Contents 1. Package Contents 2. System Requirements 2.1 Networking 2.2 Accessing the Camera 3. Explanation of the Controls 4. Hardware Installation 4.1 Attaching the Camera to the Stand 4.2 Connecting the Ethernet cable 4.3 Attaching the Powersupply 5. Security 6. Using the (Wireless) Internet Camera through the webbrowser 6.1 Web Configuration Utility 6.2 System Administration 6.3 System Administration Management 6.4 System Administration Configuration 6.5 Syste
Краткое содержание страницы № 3
1. Package Contents • Conceptronic CNETCAM / C54NETCAM • Camera stand which can be used for wall mount • Power supply, 5V DC, 2.5A • Antenna (Only with the C54NETCAM) • CD-ROM with software and manual • Quick Installation Guide 2. System Requirements 2.1. Networking • Local Area Network : 10Base-T Ethernet or 100Base-TX Fast Ethernet. • Wireless Local Area Network : IEEE 802.11g Wireless LAN. 2.2. Accessing the Camera For Web Browser Users • Operating S
Краткое содержание страницы № 4
1. Screw Hole Located on the top/bottom panel of the camera, the screw hole is used to connect the camera stand onto the camera by attaching the screw head on the camera stand into the screw hole of the camera. 2. Power and Link LED The Power LED is positioned on the right side of the Wireless Internet Camera’s lens while facing the Wireless Internet Camera. A steady BLUE light confirms that the Wireless Internet Camera is powered on. The Link LED is positioned on the right side
Краткое содержание страницы № 5
4. Hardware Installation 4.1. Attaching the Camera to the Stand The Wireless Internet Camera comes with a camera stand (optional) with a swivel ball screw head that can be attached to the Wireless Internet Camera's bottom screw hole. Attach the camera stand to the Wireless Internet Camera and station it for your application. There are three holes located in the base of the camera stand allowing the Wireless Internet Camera to be mounted on the ceiling or any wall securely. 4.2
Краткое содержание страницы № 6
6. Using the (Wireless) IP Camera through the webbrowser You can access and manage the Wireless Internet Camera through: 1) a web browser, and 2) the enclosed software IPView SE. This chapter describes the Web Configuration Utility, and provides the instructions on using the camera with a web browser. 6.1. Web Configuration Utility The (Wireless) Internet Camera can be configured with the Setup Wizard, or through its built-in Web-based Configuration. ( Extensive knowle
Краткое содержание страницы № 7
6.3. System Administration Management The Management window contains the information of your configuration. Click the items in the left column to view your settings, including: System, Video, Wireless, Network, and User. 6.3.1. System Click the System item in the left column to display the device status of your camera.
Краткое содержание страницы № 8
- Device Status: The information about the camera, including the Camera Name, Location, Model, Firmware Version, MAC Address and IP Address, can be found in this field. - Ethernet Status: You can monitor the networking status in this field, including the Link (network connection), Speed, and the Duplex mode. 6.3.2. Video Click the Video item in the left column to display the video configuration of your camera. - Video Status: The video configuration about the ca
Краткое содержание страницы № 9
6.3.4. Network Click the Network item in the left column to display the information of the LAN. - Network Status: The items in this field display the information of the LAN, such as the IP Address, SubnetMask, Default Gateway, Primary DNS Address, Secondary DNS Address, Dynamic DNS, Secondary HTTP Port, and UPnP. 6.3.5. User Click the User item in the left column to display the user(s) information. - Active Users: The items in this field display the
Краткое содержание страницы № 10
6.4 System Administration Configuration The Configuration window contains commands for settings that are required to input key details to setup the camera for operation. Click Configuration in the top menu bar and the configuration window will appear as below: 6.4.1. System Click the System item in the left column to setup the basic configuration of your camera. - Camera Name: This field is used to enter a descriptive name for the device. The default sett
Краткое содержание страницы № 11
(printable ASCII) characters. It is highly recommended to set the Admin ID and Admin Password as soon as possible to enable security option for the (Wireless) Internet Camera to function. - LED Control: This option allows user to setup the LED illumination as desired. This feature provides the flexibility when surveillance activity is ON. There are three options as follows: • Normal Power - Steady On of the LED indicator. Link - Steady On of the LED indicator. When W
Краткое содержание страницы № 12
Click the Wireless item in the left column to setup the wireless LAN configuration of your camera. - Connection Mode: Use this option to determine the type of wireless communication for your camera. There are two choices of Infrastructure mode and Ad-Hoc mode. The default setting is Infrastructure. - SSID: The SSID (Service Set Identifier) is the name assigned to the wireless network. It will auto-detect and display the SSID of wireless network connected in this box (i
Краткое содержание страницы № 13
mode. Select the appropriate channel from the list provided depending on the regulatory region where the unit is sold. The default setting is at channel 11. - Transmission Rate: Select the data transmit rate from this pull-down menu. The default setting is Fully Automatic. - WEP Encryption WEP Encryption: Wireless network communications can be intercepted easily. WEP (Wired Equivalent Privacy) is an encryption method specified by the IEEE 802.11g standard to make any intercepted
Краткое содержание страницы № 14
6.4.4. Network Click the Network item in the left column to setup the LAN configuration of your camera. - IP Address Mode: This field provides your with three options to select the IP Address Mode: - Fixed IP You can select this option and enter the IP address directly. The default settings are: IP Address – 192.168.0.20 Subnet Mask – 255.255.255.0 Default Gateway – 0.0.0.0 - Dynamic Address (DHCP) If your network uses the DHCP server, select this option. Accordi
Краткое содержание страницы № 15
- Second HTTP Port : The default port for communication is via port 80, and you can change it according to your network configuration. Select Enable from the option and enter the desired port number in the following box. - UPnP: UPnP is the architecture for pervasive peer-to-peer network connectivity of intelligent appliances, wireless devices, and PCs of all form factors. Check the Enable option to enable the function of your camera. 6.4.5. User Click the User item in the
Краткое содержание страницы № 16
6.4.6. DateTime Click the DateTime item in the left column to setup time and date for your camera, providing correct information for the remote users who might be thousands of miles away from the camera’s location. - Date & Time: You can set up time and date manually or automatically by selecting the Synchronized with Time Server option. - Synchronized with Time Server: Select this option and the time will be based on GMT setting. The time will be synchronized every 10
Краткое содержание страницы № 17
6.4.7. Upload Click the Upload item in the left column to setup configuration for FTP server, time schedule and manual operation. - Host Address: The IP Address of the target FTP server. - Port Number: The standard port number for the FTP server is Port 21, and it’s also the default setting. If the FTP server uses a specific port, please confirm the IT manager. - User Name: Enter the user name in this field. - Password: Enter the user password in this field to
Краткое содержание страницы № 18
- Video Frequency: There are two ways to set the video frequency: 1.) Set Auto/1/2/3 frames per second, or 2.) Set the time in seconds for every frame. - Base File Name: Enter the file name to make sure that the images could be saved as the base file name. - File: Since you may not upload only one image to the FTP server, you can choose the filing rule, including Overwrite, Date/Time Suffix, and set up the Sequence Number. - Manual Operation: When you click the Upload Video bu
Краткое содержание страницы № 19
option is to define time interval between two images sent. - Manual Operation: When you click the E-mail Video button in view video screen, it will start to e-mail image. The Interval option is to define time interval between two images sent. 6.5. System Administration Tools The Tools window contains commands for restarting the camera. Click Tools in the top menu bar and the Tools window will appear as below: 6.5.1. FTP Server Test Click the FTP Server Test i
Краткое содержание страницы № 20
6.5.3. Reset Click the Reset Item in the left column to reset the (Wireless) IP Camera - Reset Do you really want to reset this device? Click the YES button from this option, and you can restart the camera just like turning the device off and on and saved settings are retained. If you do not want to reset the camera, exit this window without clicking YES. 6.5.4. Factory Reset Click the Factory Reset Item in the left column to reset the (Wireless) IP Camera to the
