Краткое содержание страницы № 1
Quick Installation Guide
T V-IP410WN
1.01
Краткое содержание страницы № 2
Table of Contents English 1 1. Before You Start 1 2. Hardware Installation 2 3. Configure the IP Camera 3 Troubleshooting 7 Wireless Tips 8 Version 03.04.2011
Краткое содержание страницы № 3
1. Before You Start Package Contents Ÿ TV-IP410WN Ÿ CD-ROM (Utility and User's Guide) Ÿ Multi-Language Quick Installation Guide Ÿ Network Cable (1.5m / 5ft) Ÿ 1 x 2dBi Detachable Antenna Ÿ Mounting Kit Ÿ Power Adapter (12V DC, 1.5A) System Requirements ŸA computer with a wired network adapter properly installed ŸCD-ROM Drive ŸVGA Resolution: 800 x 600 or above ŸWeb Browser: Internet Explorer (6.0 or higher) ŸWireless Router (e.g. TEW-691GR) or Access Point (e.g. TEW-690AP) ŸAn available DH
Краткое содержание страницы № 4
2. Hardware Installation 1. Attach the antenna to the IP Camera. 2. Connect the provided network cable from one of your Router's network portsto the Ethernet port on the IP Camera. 3. Connect the Power Adapter to the IP Camera and then to a power outlet. 4. Verify the Power (Amber) and Link (Green/Blinking) LEDs are on. 2
Краткое содержание страницы № 5
3. Configure the IP Camera Note: 1. It is recommended that you configure the IP Camera from a wired computer. 1. Insert the Utility CD-ROM into your CD-ROM drive. 2. Click Run autorun.exe (Windows 7/Vista only). 3. Click IPSetup. 4. Follow the Installation Wizard instructions. 5. Once installation is complete click Close. 6. Click the Start (Windows XP) or Windows (Windows 7) icon. 7. Go to Programs Ž TRENDnet Ž IP Setup and click IP Setup. 3
Краткое содержание страницы № 6
Note: By default, the IP setting on the TV-IP410WN is set to DHCP. If you want to give the TV-IP410WN a static IP address, please refer to the User's Guide on the Utility CD-ROM. 8. Double click the IP Camera to access the browser configuration. Verify that the MAC address listed matches the MAC address on your IP camera. The MAC address is listed on the bottom of the TV-IP410WN. Click Search if no cameras are detected. 9. Enter the User name and Password, and then click OK. By default
Краткое содержание страницы № 7
12. Click Setup, Network and then click Wireless. 13. Click Site Survey. Select an ESSID. The ESSID (SSID) is the wireless network name for your wireless network (e.g. wireless router or access point). If encryption is enabled, select the proper Authentication and Encryption type, enter the Pre-Shared Key and then click Apply. (Example shows WPA2-PSK. If your wireless network does not support WPA, select open or shared instead. Contact your network administrator for more information).
Краткое содержание страницы № 8
16. Click Live View. Live video will now appear. Note: If the TV-IP410WN's configuration page cannot be displayed, the IP address assigned to the IP camera may have changed. Please repeat steps 6-8. 17. Use the command icons to control the IP camera. Your configuration is complete 1. For detailed information regarding the TV-IP410WN’s configuration and advanced settings, please refer to the Troubleshooting section, User's Guide CD-ROM, or TRENDnet's website at http://www.trendnet.com
Краткое содержание страницы № 9
Troubleshooting 1. I inserted the Utility CD-ROM into my computer's CD-ROM Drive but the installation menu does not appear automatically. What should I do? 1. For Windows 7, if the installation menu does not appear automatically, click on the Windows Icon on the bottom left hand corner of the screen, click the “Search programs and files” box, and type D:\autorun.exe, where “D” in “D:\autorun.exe” is the letter assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard . 2
Краткое содержание страницы № 10
Wireless Tips The following are some general wireless tips to help minimize the impact of interference within an environment. Assign your network a unique SSID Do not use anything that would be identifying like “Smith Family Network”. Choose something that you would easily identify when searching for available wireless networks. Do not turn off the SSID broadcast The SSID broadcast is intended to be on and turning it off can cause connectivity issues. The preferred method of securing a
Краткое содержание страницы № 11
2. Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device. Position the wireless devices in a manner that will minimize the amount of obstructions between them. 3. Building materials can have a large impact on your wireless signal. In an indoor environment, try to position the wireless devices so that the signal passes through less dense material such as dry wall. Dense materials like metal, solid wood, glass or even furniture may block or
Краткое содержание страницы № 12
Краткое содержание страницы № 13
GPL/LGPL General Information This TRENDnet product includes free software written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these codes. The details of the GNU GPL and LGPL are included in the product CD-ROM. Please also go to (http://www.gnu.org/licen
Краткое содержание страницы № 14
GPL/LGPL informações Gerais Este produto TRENDnet inclui software gratuito desenvolvido por terceiros. Estes códigos estão sujeitos ao GPL (GNU General Public License) ou ao LGPL (GNU Lesser General Public License). Estes códigos são distribuídos SEM GARANTIA e estão sujeitos aos direitos autorais dos desenvolvedores. TRENDnet não presta suporte técnico a estes códigos. Os detalhes do GNU GPL e do LGPL estão no CD-ROM do produto. Favor acessar http://www.gnu.org/licenses/gpl.txt ou http://ww
Краткое содержание страницы № 15
Краткое содержание страницы № 16
Copyright ©2011, All Rights Reserved. TRENDnet.
