Краткое содержание страницы № 1
Please read this manual and save it Please read this manual and save it
with your original sales receipt. with your original sales receipt.
T Tools needed for assembly: Phillips screwdriver ools needed for assembly: Phillips screwdriver
(not included) and Assembly Wrenches (included). (not included) and Assembly Wrenches (included).
® ®
Use only with a Power Wheels Use only with a Power Wheels 6 V 6 Volt olt
Rechargeable Batter Rechargeable Battery with A-Style Connector y with A-Style Conn
Краткое содержание страницы № 2
TABLE OF CONTENTS TABLE OF CONTENTS Important Information ............................................................... ........................2 Parts ............................................................... .....................................4 Parts Picture ............................................................... ...............................7 Batter y Charging ............................................................... ............................8 Assembly .......
Краткое содержание страницы № 3
IMPORTANT INFORMATION ELECTRICAL HAZARD DANGER To pr e v ent electr ic shoc k, do not immer se in w at er ; wipe clean with a damp cloth. WARNING • Bat t er y can f all out and injur e a child if v ehicle tips over. Alwa ys use the bat t er y r et ainer . • PREVENT FIRE - Ne v er modify the electr ical system. Alt er ations could cause a fire r esulting in ser ious injur y and could also r uin the electr ical system. - Use of the
Краткое содержание страницы № 4
PARTS • If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751 , rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded. • Metal parts have been coated with a lubricant to protect them during shipment.
Краткое содержание страницы № 5
PARTS Steering Column Steering Wheel Cover 2 Side Mirrors 4 Wheels 4 Hubcaps Steering Wheel 4 Hubcap Covers Rear Axle 2 Rear Wheel Drivers 2 Side Windows K3033pr-0921 5
Краткое содержание страницы № 6
PARTS 2 Bushings 3 /8" -16 Hex Nut - 5 Key 7 /16" Washer - 2 Wrench - 2 3 #8 x /4" Screw - 11 1" Bolt - 2 6 Volt Battery 1 #12-32 x 1 /4" Screw - 2 For your convenience, we included extra fasteners! Note: T ighten and loosen all screws with a Phillips screwdriver . Do not over -tighten the screws. Super 6 Volt Charger Part not shown: Label Sheet - 2 Fasteners Shown Actual Size K3033pr-0921 6
Краткое содержание страницы № 7
PARTS PICTURE Note: Some parts shown are assembled on both sides of the vehicle. 2 14 4 22 3 15 13 21 1 18 19 5 12 17 6 22 10 16 23 11 7 9 12 22 8 10 11 20 Parts Not Shown 1 V ehicle 9 Bushing - 2 17 Side Window - 2 2 Seat 10 Wheel - 4 18 Rear Axle 3 #8 x / " Screws - 11 Assembly Wrench 4 3 Hood 11 Hubcap - 4 19 Rear Wheel Driver - 2 1 " Bolt - 2 Label Sheet - 2 4 Windshield 12 Hubcap Cover - 4 20 Super 6 V olt Charger 1 #12 x 1 / " S
Краткое содержание страницы № 8
BATTERY CHARGING ELECTRICAL HAZARD CAUTION WARNING • Bat t er y can f all out and injur e a child if Use the char ger in dr y locations onl y . v ehicle tips over. Alwa ys use the bat t er y r et ainer . About Thermal Fuses • PREVENT FIRE ® Y our Power Wheels 6 volt batter y is equipped with a built-in - Ne v er modify the electr ical system. thermal fuse. The thermal fuse is a self-resetting safety device Alt er ations could cause a
Краткое содержание страницы № 9
BATTERY CHARGING ASSEMBLY WARNING Power Childr en can be har med b y small par ts , Indicator shar p edges and shar p points in the v ehicle's unassemb led st at e , or b y electr ical it ems . C ar e should be t ak en in unpac king and assemb l y of the v ehicle . Childr en should B not handle par ts , including the bat t er y , or help in assemb l y of the v ehicle . CAUTION A In the unassemb led st at e , this pac k age cont ains Battery Charg
Краткое содержание страницы № 10
ASSEMBLY Motors Seat Vehicle Hole in Motor Rear Axle Assembly 3 FRONT VIEW • Rotate the seat back and lift to remove from the vehicle. 5 • Slide the rear axle assembly through the hole in one motor , the Motors back end of the vehicle and then out through the other motor . Rear Wheel Driver (Ring Side Out) Rear Axle Wheel (Rib Side In) 4 TOP VIEW Motor Hubcap • Locate the motors inside the vehicle. (Peg Side In) • Make sure each motor is positioned
Краткое содержание страницы № 11
ASSEMBLY Steering Linkage Wrench Assembly 3 /8" -16 Hex Nut Rear Wheel Assembly 7 3 • Fit a / 8" -16 hex nut onto the end of the rear wheel assembly . 9 • T ighten the hex nuts on both sides of the rear wheel assembly with the wrench. • T urn the vehicle so that the front end is toward you. Hint: An extra wrench has been provided to hold the hex nut • Fit the steering linkage assembly to the front end of the vehicle. on one side of
Краткое содержание страницы № 12
ASSEMBLY Front Axle Hubcap (Peg Side In) Hubcap Wheel Cover 13 (Rib Side In) 11 • Fit and snap a hubcap cover to the hubcap. • Fit a wheel, rib side in, onto the front axle. • Repeat Assembly steps 10-13 to assemble a washer , bushing, • Slide a hubcap, peg side in, onto the front axle. wheel, hubcap, hex nut and hubcap cover to the other front axle. Front Axle Seat Tabs Wrench 3 /8" -16 Hex Nut 12 3 14 • Fit a / 8" -16 hex nut onto each end
Краткое содержание страницы № 13
ASSEMBLY Label #11 Dashboard 17 BACK VIEW 15 • Lower the front end of the vehicle. 3 • Insert four #8 x /4" screws into the seat. • Apply label #11 to the dashboard, as shown. • T ighten the screws with a Phillips screwdriver . Straight End of Steering Column Steering Wheel Hole Steering Wheel Column Steering Steering Cur Curved ved Linkage Linkage End End Hole Hole 18 16 BOTTOM VIEW • Fit the steering wheel onto the end of the steering column and
Краткое содержание страницы № 14
ASSEMBLY Key Wrench 3 /8" -16 Hex Nut Hole in Steering Column Dashboard 21 19 • Insert and “snap” the key into the hole in the dashboard. 3 • Fit a / 8" -16 hex nut on the end of the steering column. • T ighten the hex nut with the wrench. Steering Wheel Cover Steering Wheel B A Side Window 22 FRONT VIEW 20 • First insert the tabs on the bottom edge of the side window into • At an angle, fit the tabs on one side of the steering wheel co
Краткое содержание страницы № 15
ASSEMBLY Slots Windshield Side Mirror 23 25 FRONT VIEW • Fit a side mirror to the side of the vehicle. • Insert and “snap” the tabs at the top of the windshield into the slots in the top edge of the vehicle. 3 #8 x /4" Screws 24 RIGHT SIDE VIEW 3 • From the inside of the vehicle, insert two #8 x /4" screws 26 through the vehicle and into the side mirror . • T ighten the screws. 3 • Insert three #8 x /4" screws into the windshield. •
Краткое содержание страницы № 16
ASSEMBLY VEHICLE CARE • Check all screws, hex nuts and their protective coverings regularly and tighten as required. Check plastic parts on a regular basis for cracks or broken pieces. Pretend • During snowy or rainy weather , the vehicle should be stored Engine inside or under a protective cover . Remember to charge the batter y at least once per month while your vehicle is not in regular use. • A void operating the vehicle in
Краткое содержание страницы № 17
DECORATION • Before applying the labels, wipe the sur face of the vehicle with a clean, dr y cloth to remove any dust or oils. • Place the labels exactly as shown in the illustrations. For best results, avoid repositioning a label once it has been applied to the vehicle. • After applying a label, rub the label firmly with a clean, dr y cloth to make sure the label is a
Краткое содержание страницы № 18
DECORATION 24 19 20 28 4 26 22 21 23 31 2 21 29 5 32 REAR VIEW K3033pr-0921 18
Краткое содержание страницы № 19
BATTERY INSTALLATION ® IMPORTANT! Use only a Power Wheels 6 volt lead-acid rechargeable batter y . Use of any other batter y will damage your vehicle. Make sure you charge the batter y for at least ® 18 hours using the enclosed Power Wheels Super 6 volt charger before operating your vehicle for the first time. Charge the batter y for at least 14 hours after each use of the ve
Краткое содержание страницы № 20
BATTERY CARE AND DISPOSAL Care Disposal ® If a battery leak develops, avoid contact with the leaking acid and • Y our Power Wheels batter y is a non-spillable, sealed lead-acid place the damaged batter y in a plastic bag. See information below batter y . It must be recycled or disposed of in an environmentally for proper disposal. sound manner . If acid comes in contact with skin or eyes, flush with cool water • Do not dispose of a lead-acid
