Краткое содержание страницы № 1
MODEL G0612
6" JOINTER
OWNER'S MANUAL
COPYRIGHT © JANUARY, 2007 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#JC8885 PRINTED IN CHINA
Краткое содержание страницы № 2
��������������������������������������������������������������� �������� �������������������������������������������������������������� ��������������������������������������������������������������� ������� ��������������������������������������������������������������� ����� ������������������������ ��������������������������������������������������������������� ��� ��������������������������������������������������������������� ����� �����������������������������������������������������������
Краткое содержание страницы № 3
Table of Contents SECTION 4: OPERATIONS ........................... 17 INTRODUCTION ............................................... 2 Operation Safety .......................................... 17 Foreword ........................................................ 2 Basic Parts and Controls ............................. 17 Contact Info ................................................... 2 Fence Angle Stops ...................................... 19 Machine Data Sheet ...............................
Краткое содержание страницы № 4
INTRODUCTION Foreword Contact Info We are proud to offer the Model G0612 6" Jointer. If you have any comments regarding this manual, This machine is part of a growing Grizzly family of please write to us at the address below: fine woodworking machinery. When used accord- ing to the guidelines set forth in this manual, Grizzly Industrial, Inc. C you can expect years of trouble-free, enjoyable /O Technical Documentation Manager operation and proof of Grizzly’s commitment to P.O. Box 2069 customer
Краткое содержание страницы № 5
Machine Data Sheet MACHINE DATA SHEET Customer Service #: (570) 546-9663 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901 Design Type: ............................................................................................. Benchtop Model Overall Dimensions: Table Size .................................................................................................6" W x 24" L 3 Height (from bench to table) ............................................................................
Краткое содержание страницы № 6
Identification C A K D J H I B I L G F E Figure 2. G0612 identification — back view. Figure 1. G0612 identification — front view. J. Fence Bracket Assembly A. Outfeed Table K. Fence Tilting Handle B. Cutterhead Guard L. Fence Sliding Handle C. Fence D. Infeed Table E. Depth of Cut Adjusting Knob F. ON/OFF Switch G. Dust Collection Chute H. Dust Collection Bag I. Push Blocks -4- G0612 6" Jointer
Краткое содержание страницы № 7
SECTION 1: SAFETY For Your Own Safety, Read Instruction Manual Before Operating this Machine The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measure
Краткое содержание страницы № 8
Safety Instructions for Machinery 7. ONLY ALLOW TRAINED AND PROP- 17. REMOVE ADJUSTING KEYS AND ERLY SUPERVISED PERSONNEL TO WRENCHES. Make a habit of checking for OPERATE MACHINERY. Make sure oper- keys and adjusting wrenches before turn- ation instructions are safe and clearly ing machinery ON. understood. 18. CHECK FOR DAMAGED PARTS 8. KEEP CHILDREN AND VISITORS AWAY. BEFORE USING MACHINERY. Check Keep all children and visitors a safe dis- for binding and alignment of parts, broken tanc
Краткое содержание страницы № 9
Additional Safety for Jointers 1. JOINTER KICKBACK. "Kickback" is when 6. KICKBACK ZONE. The "kickback zone" the workpiece is thrown off the jointer table is the path directly through the end of the by the force of the cutterhead. Always use infeed table. Never stand or allow others to push blocks and safety glasses to reduce stand in this area during operation. the likelihood of injury from kickback. If you do not understand what kickback is, or how 7. MAXIMUM CUTTING DEPTH. The maxi- 1 it
Краткое содержание страницы № 10
SECTION 2: CIRCUIT REQUIREMENTS Grounding 110V Operation In the event of an electrical short, grounding reduces the risk of electric shock. This tool is equipped with a power cord that has a grounding wire, which must be properly connected to the grounding prong on the plug; likewise, the outlet Serious personal injury could occur if you must be properly installed and grounded. All elec- connect the machine to the power source trical connections must be made in accordance before you have
Краткое содержание страницы № 11
SECTION 3: SETUP Unpacking Setup Safety The Model G0612 was carefully packed when it left our warehouse. If you discover the machine is damaged after you have signed for delivery, This machine presents please immediately call Customer Service at serious injury hazards (570) 546-9663 for advice. to untrained users. Read through this entire manu- Save the containers and all packing materials for al to become familiar with possible inspection by the carrier or its agent. the controls and
Краткое содержание страницы № 12
Inventory A After all the parts have been removed from the box, you should have the following items: Jointer Box Contents: (Figure Qty 4 & 5) A. Jointer Bed Assembly ................................ 1 B. Fence ......................................................... 1 C. Dust Collection Bag .................................... 1 B D. Push Blocks ................................................ 2 E. Fence Tilting Handle .................................. 1 F. Fence Bracket Assembly ...........
Краткое содержание страницы № 13
Mounting the Jointer Cleanup The unpainted cast iron surfaces are coated with Your Model G0612 jointer must be securely a waxy oil to protect them from corrosion during mounted to a sturdy workbench. There are two shipment. Remove this protective coating with a ways to do this—either with a direct mount or solvent cleaner or citrus-based degreaser such with a through mount. We strongly recommend a as Grizzly’s G7895 Degreaser. To clean thor- through mount. Whichever method you choose,
Краткое содержание страницы № 14
3. Insert the locking plate assembly into the Attaching the Fence fence support, positioning it so the two pins are against the bottom edge of the fence sup- Support port as shown in Figure 10. Components and Hardware Needed: Qty Locking Plate Jointer Bed Assembly ........................................ 1 Assembly Fence Support ................................................... 1 Locking Plate Assembly .................................... 1 Fence Sliding Handle ..........................
Краткое содержание страницы № 15
3. Slide the fence forward until it contacts the Installing the Fence cutterhead guard and the cutterhead guard completely covers the cutterhead as shown in Figure 14. Components and Hardware Needed: Qty Jointer Bed Assembly with Fence Support ....... 1 Fence ................................................................. 1 Fence Cutterhead Fence Bracket Assembly ................................... 1 Guard Fence Tilting Handle ......................................... 1 Cap Screws M8-1.2
Краткое содержание страницы № 16
To adjust the height of the cutterhead knives: Checking Outfeed 1. DISCONNECT THE JOINTER FROM THE Table Alignment POWER SOURCE! 2. Block the cutterhead guard back so the The outfeed table MUST be level with the knives cutterhead is fully exposed. when they are at top dead center (their highest point during rotation) or the workpiece cannot be 3. Locate the knife clamp screws and knife fed across the jointer safely. adjustment jack screws (see Figures 17 & 18). To check the outfeed table
Краткое содержание страницы № 17
5. Loosen the two jack screws, then, using a Dust Collection scrap wood block, push the knife blade down until both ends are sightly below the straight- edge. 6. Using the 4mm hex wrench, turn each jack 1 screw clockwise /8 of a turn at a time until The Model G0612 creates substantial amounts each end of the knife touches the straight- of wood dust while operating. DO NOT oper- edge evenly. ate this machine without an adequate dust collection system. Failure to use a dust col- 7. Rotate t
Краткое содержание страницы № 18
2. Slip the bag clamp over the collection bag, 2. Make sure the cutterhead guard fully covers then attach the collection bag to the chute the cutterhead. and clamp it as shown in Figure 20. 3. Make sure all tools and foreign objects have been removed from the machine. Bag 4. Review SECTIONS 1 and 2 (SAFETY and Clamp CIRCUIT REQUIREMENTS) on Pages 5- 8 and connect your machine to the power source. 5. Turn the jointer ON. — The jointer should run smoothly with little or no vibration. — Im
Краткое содержание страницы № 19
SECTION 4: OPERATIONS Basic Parts and Operation Safety Controls This section covers the basic parts and controls Damage to your eyes, lungs, and ears could used during routine operations. Refer to Figures result from using this machine without 21 and 22 for basic parts and control locations. proper protective gear. Always wear safety glasses, a respirator, and hearing protection when operating this machine. C A B H D F Loose hair and cloth- G E ing could get caught in machinery and cause
Краткое содержание страницы № 20
F. ON/OFF Switch: This paddle switch starts and stops the cutterhead rotation. The yellow part of the switch is a safety device. When J you remove this yellow key (by pulling it for- I ward and out), the switch locks in the OFF position. Always remove this yellow key when K you leave the jointer work area. Removing the key prevents unsupervised persons in your shop (especially children) from easily or accidentally starting the jointer. G/H. Dust Collection Chute and Bag: This assembly r
