Руководство по эксплуатации HP (Hewlett-Packard) BH9004E

Краткое содержание страницы № 1

BOATHOUSE
BH9004E
INSTRUCTIONS


























REIMANN & GEORGER CORPORATION
MARINE PRODUCTS BUFFALO, NY 14225
P/N 6112172 06/01/01

Краткое содержание страницы № 2

SAFETY PRECAUTIONS Please read and thoroughly understand the following safety precautions and instruction manuals before using your RGC Boathouse Lift. If you have any questions, contact the dealer who sold you the lift. 1) Before allowing anyone to operate the lift, be certain they fully understand the proper operating procedures. 2) Be certain to install the lift as specified in instruction manual. Not doing so can cause equipment damage and or personal injury.

Краткое содержание страницы № 3

INSTALLATION AND SETUP PRE-INSTALLATION CHECKS 1. Insure you have received all specified parts as listed in supplied parts list. 2. Consult licensed professional engineer to inspect and approve boathouse structure for this type of application and loading capacity. WARNING: INSURE BOATHOUSE STRUCTURE HAS BEEN DESIGNED FOR THIS TYPE OF APPLICATION AND CONSTRUCTED IN ACCORDANCE WITH LOCAL BUILDING AND ELECTRICAL CODES TO PREVENT PERSONAL INJURY AND / OR EQUIPMENT DAMAGE.

Краткое содержание страницы № 4

CAUTION: FAILURE TO INSTALL THE VENT PLUG CAN CAUSE PREMATURE FAILURE OF THE REDUCER SEALS AFTER EXTENDED USE AND VOID YOUR WARRANTY. 6. Mount the reversing switches in a suitable location protected from water and near enough to each other to allow for easy operation. 7. Assemble safety latches to ends of hooks. Attach hooks to plain double blocks with shackles. 8. Attach pulley blocks to all hangers as shown in diagram. 9. Reeve the wire rope through the blocks and spools as

Краткое содержание страницы № 5

CAUTION: THE ABOVE CHART IS ONLY A REFERENCE FOR WIRE SIZING. DO NOT USE THIS INFORMATION TO ACTUALLY SIZE THE WIRE TO YOUR POWER DRIVE. YOU MUST CONSULT A LICENSED ELECTRICAL CONTRACTOR WHO WILL DETERMINE THE ACTUAL WIRE SIZE REQUIRED TO SUIT YOUR PARTICULAR APPLICATION. 2. Use plastic zip ties and any other supplies needed to tie off the electrical cords. This protects the cords from abrasion, sharp objects, water contact and other harm. WIRING PROCEDURES Salzer Reversing

Краткое содержание страницы № 6

BOATHOUSE – 9000 LB. PARTS LIST Each reference number in the following parts lists can be matched with the reference number referred to in both the text and illustrations. # 3103042 – BH9004E BOAT LIFT # 3103040 – BH9004 COP 1 OF 2 REF # PART # QTY DESCRIPTION 1 3106098 4 BH #37X HANGER 2 3106099 8 BH #38X HANGER 4 7303112 4 BLK HOOK SGL W / LATCH 5 7303115 4 BLK HOOK DBL W/ LATCH 6 7303116 4 BLK PLAIN DBL # 3103041 – BH9004 COP 2 OF 2 REF # PART # QTY DESCRIPTION 7

Краткое содержание страницы № 7

Краткое содержание страницы № 8

BH9004 Power Drive