Руководство по эксплуатации McCulloch 8823

Краткое содержание страницы № 1

Heavy-Duty Steam Cleaner
Distributed Exclusively By
Harbor Freight Tools
3491 Mission Oaks Blvd.
Camarillo, CA 93011
Tel: (800) 444-3353
www.harborfreight.com
Printed in China
Harbor Freight Tools
ITEM # 8823
V080716
Please read all instructions before use.

Краткое содержание страницы № 2

Краткое содержание страницы № 3

NOTES IMPORTANT SAFEGUARDS WARNING: To reduce the risk of fire, electrical shock, or injury, the ____________________________________________________ following basic safety precautions should always be followed when ____________________________________________________ using an electrical appliance. ____________________________________________________ READ ALL INSTRUCTIONS BEFORE USING YOUR ____________________________________________________ HEAVY-DUTY STEAM CLEANER ____________________________

Краткое содержание страницы № 4

TROUBLESHOOTING &CUSTOMER SUPPORT IMPORTANT SAFEGUARDS PROBLEM POSSIBLE CAUSE SOLUTION WARNING: To reduce the risk of electrical shock, this appliance has a three-pronged plug. This plug will fit in a polarized wall outlet only one Water spills out from Water Water Reservoir is already full. Do not try to add any more water. way. If the plug does not fit fully in the outlet, contact a licensed Reservoir fill hole when adding electrician to install a proper outlet. DO NOT attempt to modify th

Краткое содержание страницы № 5

HEAVY-DUTY STEAM CLEANER TROUBLESHOOTING PRODUCT INFORMATION The following features and accessories are included with your Heavy-Duty Steam Cleaner. PROBLEM POSSIBLE CAUSE SOLUTION Carefully inspect packaging material as some parts are shipped inside Styrofoam packaging. Unit fails to steam. Lighted Unit is not plugged in. Plug into electrical outlet. On/Off Switch does not illuminate. Household Circuit Breaker / Reset Circuit Breaker / Ground Ground Fault Interrupter has Fault Interrupter, or

Краткое содержание страницы № 6

HEAVY-DUTY STEAM CLEANER CARE &STORAGE GUIDELINES PRODUCT INFORMATION • The Lighted On/Off Switch (1) provides a clear visual indication of whether the unit is PROPER STORAGE powered on. Preparing your Heavy-Duty Steam Cleaner for storage is quick and simple. When you • The Steam Ready Light (2) indicates when the unit is ready to begin steaming. have finished your steaming tasks, follow the steps listed below. • The Storage Compartment (3) is used for storing small accessories, and houses the

Краткое содержание страницы № 7

USING THE ASSEMBLING THE HEAVY-DUTY STEAM CLEANER HEAVY-DUTY STEAM CLEANER OPERATING HEAVY-DUTY STEAM CLEANER ATTACHING CARRY HANDLE NOTE: Be sure that Water Reservoir has already been filled and that all desired 1. Insert Carry Handle into Carry Handle hole accessories are connected before following these steps. on top of unit. Please refer to illustration for assistance with proper alignment 1. Plug grounded power cord into a convenient electrical outlet. (FIGURE 1). CAUTION: This unit u

Краткое содержание страницы № 8

ASSEMBLING THE USING THE HEAVY-DUTY STEAM CLEANER HEAVY-DUTY STEAM CLEANER ATTACHING UTILITY BRUSHES FILLING WATER RESERVOIR WITH WATER WARNING: Do not try to connect accessories while unit is emitting steam. 1. Place Steam Cleaner on a flat, level surface. This section applies to all Utility Brushes. Note that Utility Brushes attach to Steam 2. Make sure Lighted On/Off Switch is set to “Off” position and grounded power cord is Jet Nozzle, not to main steam nozzle. unplugged from electrical o