Руководство по эксплуатации Whirlpool W10388776A-SP

Руководство по эксплуатации для устройства Whirlpool W10388776A-SP

Устройство: Whirlpool W10388776A-SP
Категория: Сушилка для одежды
Производитель: Whirlpool
Размер: 7.82 MB
Добавлено: 4/7/2014
Количество страниц: 20
Печатать инструкцию

Скачать

Как пользоваться?

Наша цель - обеспечить Вам самый быстрый доступ к руководству по эксплуатации устройства Whirlpool W10388776A-SP. Пользуясь просмотром онлайн Вы можете быстро просмотреть содержание и перейти на страницу, на которой найдете решение своей проблемы с Whirlpool W10388776A-SP.

Для Вашего удобства

Если просмотр руководства Whirlpool W10388776A-SP непосредственно на этой странице для Вас неудобен, Вы можете воспользоваться двумя возможными решениями:

  • Полноэкранный просмотр -, Чтобы удобно просматривать инструкцию (без скачивания на компьютер) Вы можете использовать режим полноэкранного просмотра. Чтобы запустить просмотр инструкции Whirlpool W10388776A-SP на полном экране, используйте кнопку Полный экран.
  • Скачивание на компьютер - Вы можете также скачать инструкцию Whirlpool W10388776A-SP на свой компьютер и сохранить ее в своем архиве. Если ты все же не хотите занимать место на своем устройстве, Вы всегда можете скачать ее из ManualsBase.
Whirlpool W10388776A-SP Руководство по эксплуатации - Online PDF
Advertisement
« Page 1 of 20 »
Advertisement
Печатная версия

Многие предпочитают читать документы не на экране, а в печатной версии. Опция распечатки инструкции также предусмотрена и Вы можете воспользоваться ею нажав на ссылку, находящуюся выше - Печатать инструкцию. Вам не обязательно печатать всю инструкцию Whirlpool W10388776A-SP а только некоторые страницы. Берегите бумагу.

Резюме

Ниже Вы найдете заявки которые находятся на очередных страницах инструкции для Whirlpool W10388776A-SP. Если Вы хотите быстро просмотреть содержимое страниц, которые находятся на очередных страницах инструкции, Вы воспользоваться ими.

Краткое содержание
Краткое содержание страницы № 1

Electric Dryer Installation Instructions
Table of Contents
DRYER SAFETY ......................................................................... 2
inSTAllATion REquiREmEnTS ............................................. 3
Tools and Parts ...................................................................... 3
location Requirements ......................................................... 4
Electrical Requirements ........................................................ 5
install leveling legs .

Краткое содержание страницы № 2

DRYER SAFETY 2

Краткое содержание страницы № 3

INSTALLATION REQUIREMENTS ToolS AnD PARTS Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. Parts supplied (all models): Tools needed: Leveling legs (4) Flat-blade screwdriver #2 Phillips screwdriver Parts supplied (steam models): Adjustable wrench that Level opens to 1" (25 mm) or “Y” connector Short inlet hose hex-head socket wrench 5' inlet hose Rubber washer Wire stripper (direct wire Vent clamps inst

Краткое содержание страницы № 4

inSTAllATion ClEARAnCES LOCATION REQUIREMENTS Location must be large enough to allow dryer door to open fully. DRYER DimEnSionS Dryer with extended back: Dryer with flat back: You will need: Back view: ■ A location allowing for proper exhaust installation. See “Venting Requirements.” ■ A separate 30 amp circuit. ■ If using power supply cord, a grounded electrical outlet located within 2 ft. (610 mm) of either side of dryer. See “Electrical Requirements.” ■ Floor must support dryer weight of

Краткое содержание страницы № 5

Spacing for recessed area or closet installation ELECTRICAL REQUIREMENTS All dimensions show recommended spacing allowed, with tested spacing of 0" (0 mm) clearance on sides and rear. it is your responsibility: ■ To contact a qualified electrical installer. ■ Additional spacing should be considered for ease of installation and servicing. ■ To be sure that the electrical connection is adequate and in conformance with the National Electrical Code, ANSI/NFPA 70 ■ Additional clearances might be

Краткое содержание страницы № 6

if your outlet looks like this: INSTALL LEvELINg LES g Then choose a 4-wire power supply cord with ring or spade terminals and UL listed strain relief. The 4-wire power supply cord, at least 4 ft. (1.22 m) long, must have 4 10-gauge solid copper wires and match a 4-wire receptacle of NEMA Type 14-30 R. The ground wire (ground 4-wire conductor) may be either green or bare. The receptacle neutral conductor must be identified by a (14-30R) white cover. if your outlet looks like this: Pr

Краткое содержание страницы № 7

ELECTRICAL CONNECTION 2. Remove terminal block cover Power Supply Cord B E C A D F Before you start, disconnect power. Remove hold-down screw (D) and terminal block cover (A). A. Terminal block cover B. External ground conductor screw C. Center terminal block screw D. Hold-down screw E. Neutral ground wire F. Hole below terminal block cover POwER SUPPLY CORD CONNECTION Power supply cord strain relief Electrical Connection options Attach power supply cord 1. strain relief 1. Choo

Краткое содержание страницы № 8

if your outlet looks like this: 2. Connect neutral ground wire Power supply cord 4-wire receptacle and neutral wire (NEMA Type 14-30R): Go to "4-Wire Power Supply Cord Connection" on this page. E Power supply cord 3-wire receptacle B (NEMA Type 10-30R): Go to "3-Wire Power Supply Cord C Connection" on page 9. 4-WiRE PoWER SuPPl Y CoRD ConnECTion imPoRTAnT: A 4-wire connection is required for mobile homes and Connect neutral ground wire (E) and neutral wire (white) (C) where local codes do

Краткое содержание страницы № 9

3-WiRE PoWER SuPPl Y CoRD ConnECTion 3. Connect remaining wires Use where local codes permit connecting cabinet-ground conductor to neutral wire. 3-wire receptacle (NEMA 3-prong plug type 10-30R) Connect remaining wires to outer terminal block screws. Tighten screws. Finally, reinsert tab of terminal block cover into slot of dryer rear panel. Secure cover with hold-down screw. Now, go to "Venting Requirements". Direct Wire Spade terminals with Ring terminals upturned ends 1. Remove center

Краткое содержание страницы № 10

5" (127 mm) 2. Prepare to connect neutral 2. Attach direct wire cable ground wire and neutral wire to strain relief E A B Put direct wire cable through the strain relief. The strain relief should have a tight fit with the dryer cabinet and be in a horizontal position. Tighten strain relief screw against the direct wire cable. Remove center terminal block screw (B). Remove neutral ground wire (E) from external ground conductor screw (A). if your wiring looks like this: 4-

Краткое содержание страницы № 11

3½" (89 mm) 5. Connect remaining wires 3. Connect neutral wire B C Place hooked end of neutral wire (white Place hooked ends of remaining direct wire cable wires or center) (C) of direct wire cable under under outer terminal block screws (hooks facing right). center terminal block screw (B). Squeeze Squeeze hooked ends together and tighten screws. Finally, hooked end together. Tighten screw. reinsert tab of terminal block cover into slot of dryer rear panel. Secure cover with hold-down

Краткое содержание страницы № 12

vENTINg 2. Connect neutral ground wire and neutral wire VEnTinG REquiREmEnTS B E C Connect neutral ground wire (E) and neutral wire (white or center wire) (C) of power supply cord or cable under center terminal block screw (B). Tighten screw. 3. Connect remaining wires WARninG: To reduce the risk of fire, this dryer MUST BE EXHAUSTED OUTDOORS. imPoRTAnT: Observe all governing codes and ordinances. Dryer exhaust must not be connected into any gas vent, chimney, wall, ceiling, attic, crawlspa

Краткое содержание страницы № 13

Exhaust hoods: PLAN vENT SYSTEM ■ Must be at least 12" (305 mm) from ground or any object that may obstruct exhaust (such as flowers, rocks, bushes, or Recommended exhaust installations snow). Typical installations vent the dryer from the rear of the dryer. Other installations are possible. Recommended Styles: B C D E A F Louvered Hood Box Hood G Acceptable Style: B H A. Dryer E. Clamps B. Elbow F. Rigid metal or flexible metal vent C. Wall G. Vent length necessary to connect elbows D. Exhau

Краткое содержание страницы № 14

If you prefer, dryer may be converted to exhaust through Special provisions for mobile homes: the bottom. You must contact your local dealer to have dryer Exhaust vent must be securely fastened to a noncombustible converted. portion of mobile home and must not terminate beneath the mobile home. Terminate exhaust vent outside. B A A. Standard rear offset exhaust installation B. Bottom exhaust installation Alternate installations for close clearances Venting systems come in many vari

Краткое содержание страницы № 15

CONNECT INLET HOSES maytag Vent System Chart For non-steam models, skip to “Connect Vent” on page 16. The dryer must be connected to the cold water faucet using number of Type Box/louvered Angled 90° elbows of vent hoods hoods the new inlet hoses. Do not use old hoses. Turn cold water off, remove and 0 Rigid metal 94 ft. (28.7 m) 100 ft. (30.5 m) 1. replace rubber washer 1 Rigid metal 90 ft. (27.4 m) 84 ft. (25.6 m) 2 Rigid metal 80 ft. (24.4 m) 74 ft. (22.6 m) 3 Rigid metal 71 ft

Краткое содержание страницы № 16

Attach long hose to “Y” Turn on cold water faucet 4. 6. connector and tighten couplings Check that the water faucets are turned on. One end of the long hose has a wire mesh strainer inside the coupling. Attach this end to the “Y” connector. Attach washer 7. Check for leaks cold inlet hose to other side of “Y” connector. Screw on coupling by hand until it is seated on connector. Using pliers, tighten the couplings an additional two-thirds turn. noTE: Do not overtighten. Damage to the coupl

Краткое содержание страницы № 17

COMPLETE INSTALLATION 2. move dryer to final location CHECKLIST Check that all parts are now installed. If there is an extra q part, go back through steps to see what was skipped. Check that you have all of your tools. q Dispose of/recycle all packaging materials. q Check dryer’s final location. Be sure vent is not crushed q or kinked. Check that dryer is level. See “Level Dryer”. q Remove film on console and any tape remaining on dryer. q Wipe dryer drum interior thoroughly with

Краткое содержание страницы № 18

Reverse the strike REERSE DOOR S v wINg You can change your door swing from a right-side opening to a 1. Remove the door strike from the dryer door opening. left-side opening, if desired. 2. Remove the cosmetic screw opposite the door strike. 1. Place a towel or soft cloth on top of dryer or work space to avoid damaging the surface. Remove the door assembly B A 1. Open the dryer door. 2. Remove the bottom scr ew (B) from each of the two hinges that attach dryer door to front panel of dryer.

Краткое содержание страницы № 19

4. Install the two hinges to the front panel of the dryer using TROUBLESHOOTINg 4 screws. Use the non-slotted side to attach the hinge to the front panel. DRYER oPERATion 5. Install scr ews in top hinge holes in the door. Do not tighten Dryer will not run screws. Leave approximately 1/4" (5 mm) of screw exposed. ■ Has a household fuse blown, or has a circuit breaker tripped? There may be two household fuses or circuit breakers for the dryer. Check that both fuses are intact and tight,

Краткое содержание страницы № 20

Select a Timed Dry heated cycle, and restart the dryer. If the message persists, have your entire home venting run cleaned. ■ “E” Variable (E1, E2, E3) service codes: Call for service. DRYER RESul TS Clothes are not drying satisfactorily, drying times are too long, or load is too hot ■ is the lint screen clogged with lint? Lint screen shold be cleaned before each load. ■ is the dryer located in a closet? Closet doors must have ventilation openings at the top and bottom of the door. The f


Скачавание инструкции
# Руководство по эксплуатации Категория Скачать
1 Whirlpool 3395339 Руководство по эксплуатации Сушилка для одежды 105
2 Whirlpool 240-volt Руководство по эксплуатации Сушилка для одежды 61
3 Whirlpool 3396304 Руководство по эксплуатации Сушилка для одежды 15
4 Whirlpool 3393 137 Руководство по эксплуатации Сушилка для одежды 8
5 Whirlpool 3390148 Руководство по эксплуатации Сушилка для одежды 7
6 Whirlpool 3397627C Руководство по эксплуатации Сушилка для одежды 10
7 Whirlpool 240-VOLT ELECTRIC DRYER Руководство по эксплуатации Сушилка для одежды 14
8 Whirlpool 3397617 Руководство по эксплуатации Сушилка для одежды 5
9 Whirlpool 340 1094 Руководство по эксплуатации Сушилка для одежды 34
10 Whirlpool 3405792 Руководство по эксплуатации Сушилка для одежды 0
11 Whirlpool 3401092 Руководство по эксплуатации Сушилка для одежды 0
12 Whirlpool 3401086 Руководство по эксплуатации Сушилка для одежды 1
13 Whirlpool 3401011 Руководство по эксплуатации Сушилка для одежды 2
14 Whirlpool 3402328 Руководство по эксплуатации Сушилка для одежды 0
15 Whirlpool 3978909 Руководство по эксплуатации Сушилка для одежды 1
16 ACS 882.00284.00 Руководство по эксплуатации Сушилка для одежды 0
17 ACS 255 CMF (85 Руководство по эксплуатации Сушилка для одежды 0
18 ACS 380 M3 /hr) Руководство по эксплуатации Сушилка для одежды 0
19 Philips 1.07E+23 Руководство по эксплуатации Сушилка для одежды 1
20 Philips 1.07E+31 Руководство по эксплуатации Сушилка для одежды 3