Краткое содержание страницы № 1
A Note To You 2
3
4
Before Using Your
Refrigerator 5
7
Caring For Your
Refrigerator 19
I
1 ] Food StorageGuide 22
If You Need
.
tF%izi: 24
Warranty 28
1400-253-1301
Call us with questions or comments.
NO-FROST REFRIGERATOR-FREEZER
MODELS EDZOZK EDZZZR
B
Краткое содержание страницы № 2
A Note To You Thank you for buying a Whirlpool@ appliance. You have purchased a quality, worMclass home appliance. Years of engineering experience went into its manufacturing. To ensure that you enjoy many years of trouble-free operation, we developed this Use and Care Guide. It is full of valuable information on how to operate and maintain your appliance properfy and safely. Please read it carefully. Also, please com- plete and mail the Ownership Registration Card provided with your appli
Краткое содержание страницы № 3
Important Safety Instructions l Read all instructions before using the l Never clean refrigerator parts with refrigerator. flammable fluicls. The fumes can create a fire hazard or explosion. @Child entrapment and suffocation are not problems of the past. Junked or l FOR YOUR SAFETY l abandoned refrigerators are still danger- DO NOT STORE OR USE GASOLINE OR ous . . . even if they will “just sit in the OTHER FLAMMABLE VAPORS AND garage a few days.” LIQUIDS IN THE VlClNlTY OF THIS OR If
Краткое содержание страницы № 4
Parts And Features This section contains captioned illustrations. Use them to become familiar with where all parts and features are located and what they look like. Control panel Llght Automatic ke ke maker and Door shelves Base‘ grille Model EDSOZK shown Control panel I I Freezer control Refrigerator control
Краткое содержание страницы № 5
Before Using Your Refrigerator In This Section Page Page 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installing It properly Cleaning it . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5 Leveling it Plugging it In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . It is important to prepare your refrigerator for use. T
Краткое содержание страницы № 6
Installing it properly 1. Allow ‘$5 inch (1.25 cm) space on each side and at the top of the refrigerator for ease of installation. 2. If the refrigerator is to be against a wall, you might want to leave extra space on the hinge side closest to the wall so the door can be opened wider. 3. The refrigerator can be flush against the wall. Leveling it Right to raise; Your refrigerator has 2 front leveling left to lower screws-one on the right and one on the left. To adjust one or both
Краткое содержание страницы № 7
Using Your Refrigerator In This Section Page Page ice cubs trays . . . . . . . . . . . . . . . . . . 12 Setting the controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Using the Uslng the Ice dispenser (ED22ZR) ..12 Changing the control settings . . . . . . . . . . . 8 ke maker . . . . . . . . 13 Using the automatic Adjustlng the shelf glide . . . . . . . . . . . . . . . . . . . . 9 Removing the ice maker Adjusting the refrigerator shelves . . ..Q 14 storage bin . .
Краткое содержание страницы № 8
NOTE: The Automatic Exterior Moisture 3. Give the refrigerator time to cool down control continuously guards against moisture completely before adding food. This may build-up on the outside of your refrigerator take several hours. The settings indicated above should be cabinet. This control does not have to be set or adjusted. correct for normal, household refrigerator usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm. lf you ne
Краткое содержание страницы № 9
Adjusting the shelf glide Use the shelf glide to secure odd-shaped items or to separate other items. 1. Grasp glide. 2. Slide glide along track. NOTE: Shelf glide cannot be removed. Adjusting the refrigerator shelves Adjust shelves to match the way you use your refrigerator. To remove the shelves: 1. Remove items from the shelf. 2. Tilt shelf up at front. 3. Lift shelf up at back. 4. Pull shelf straight out. To replace the shelves: 1. Guide the rear shelf hooks into the slots in
Краткое содержание страницы № 10
Removing the crisper and crisper cover To remove the crisper: Pull out to the 1. Slide the crisper straight out to the stop. stop, lift the front 2. Lii the front slightly. and pull again. 3. Slide out the rest of the way. 4. Replace in reverse order. To remove the cover: 1. Hold cover firmly with both hands and lifl front of cover off supports. 2. Lift cover out by pulling up and out. Lift the cover To replace the cover: front, then 1. Fit back of cover into notch supports on th
Краткое содержание страницы № 11
Removing the freezer shelves To remove the shelf: 1. Lii right side of shelf off supports. 2. Slide shetf out of shelf support holes. 3. Replace in reverse order. Removing the freezer bin (EDZZZR) To remove the bin: Pull out to the stop, 1. Slide bin out to the stop. lift the front and 2. Lii the front to clear the stop. pull again. 3. Slide bin out the rest of the way. To replace the bin: 1. Place bin on the slides. 2. Make sure the wire stops clear the front of the slides. 3.
Краткое содержание страницы № 12
using the ice cube trays (EDZOZK) If you don’t use the cubes, they may shrink. The moving cold air starts a slow evapora- tion. The longer you store cubes, the smaller they get. To remove ice: 1. Hold tray at both ends. 2. Twist slightly. using the ice dispenser (EDZZZR) Personal Injury Hazard Tumbling ice and pressure can break a fragile glass. Use a sturdy glass when dispensing ice or water. Failure to do so could result in personal injury or breakage. Ice dispenses from the ice
Краткое содержание страницы № 13
Using the automatic ice maker (Factory-installed on EDZZZR, optional on EDZOZK) Here are a few things you will want to know about your automatic ice maker: 4 upto atop ke l The ON/OFF lever is a wire signal arm. maker. DOWN to make ice automatically. UP to shut off the ice maker. t DOWNto start ke NOTE: Do not turn ice maker on until il is maker. conneded to the water supply. Instruc- tions for ice maker water supply hook up are attached to the back of the refrigerator cabinet.
Краткое содержание страницы № 14
Removing the ice maker storage bin (EDZZZR) Remove, empty and clean the storage bin if: l the ice dispenser has not, or will not, be used for a week or more. l a power failure causes ice in the bin to melt and freeze together. l the ice dispenser is not used regularly. To remove ke bin: 1. Pull the covering panel out from the bottom and slide it to the rear. 2. Lift the signal arm so it clicks into the OFF (up) position. Ice can still be dispensed, but no more can be made. 3. Lift t
Краткое содержание страницы № 15
Solving common ice maker/dispenser problems PROBLEM CAUSE SOLUTIONS Ice dispenser l Freezer door open l Close the freezer door. won’t work l Ice bin not properly l Make sure bin is pushed in all the way. installed l Wrong ice in bin l Use only crescents from ice maker. Shake the bin occasionally to keep cubes separated and to increase storage room. l Dispenser not used for l Dump oki ice and make a new supply. extended periods, causing ice cubes to melt together Ice dispenser l I
Краткое содержание страницы № 16
Removing the base grille Condenser coils To remove the grille: I 1. Open both doors. -l-II 2. Pull base grille forward to release the support tabs from the metal clips. 3. Do not remove Tech Sheet fastened behind the grille. _--- To replace the grille: Defrost grille 1. Line up grille support tabs with metal pan IL clips. SUPpofl 2. Push firmly to snap into place. tabs 3. Close the doors. See cleaning instructions for defrost pan and condenser coils on page 20. Changing t
Краткое содержание страницы № 17
To change crisper light: 1. Disconnect refrigerator from power supply. 2. Pull top of light shield forward until it snaps free. 3. Lower light shield to clear bottom supports. 4. Pull light shield straight out to remove. a 40-watt appliance 5. Replace bulb with bulb. risper light 6. Replace light shield in reverse order. 7. Reconnect refrigerator to power suppfy. To change freezer light: 1. Disconnect refrigerator from power supply. 2. Push in sides of light shield until it snaps
Краткое содержание страницы № 18
Understanding the sounds you may hear Your new refrigerator may make sounds that Water sounds your old one didn’t. Because the sounds are When the refrigerator stops running, you new to you, you might be concerned about may hear gurgling in the tubing for a few them. Don’t be. Most of the new sounds are minutes after it stops. You may also hear normal. Hard surfaces like the floor, walls defrost water running into the defrost water and cabinets can make the sounds seem pan. louder.
Краткое содержание страницы № 19
Caring For Your Refrigerator In This Section Page Page Cleaning your refrigerator . . . . . . . . . . . . . . . 19 Power interruptions . . . . . . . . . . . . . . . . . . . . . . . . . . 21 and moving care . . . . . . . . . . . . . . . 20 Vacation Your refrigerator is built to give you many years of dependable service. However, there are a few things you can do to help extend its product life. This section tells you how to clean your refrigerator and what to do when going on vacation, mo
Краткое содержание страницы № 20
PART WHAT TO USE HOW TO CLEAN l Wash, rinse and dry thoroughly. Door liners and Sponge, soft doth gaskets or paper towel with DO NOT USE cleaning waxes, concen- mild detergent and trated detergents, bleaches or cleaners warm water containing petroleum on plastic parts. Soft, clean sponge l Wash, rinse and dry thoroughly. Plastic parts (covers and or soft, clean cloth DO NOT USE paper towels, window with mild detergent paneW sprays, scouring cleansers or flam- and warm water mabk
