Краткое содержание страницы № 1
LAPTOP 16H
Instruction Manual
LAP16H B/EPM; F/EPM, FN/EPM
16 Bay Horizontal laptop storage
& recharging trolley with
power management
Краткое содержание страницы № 2
Instruction Manual Before proceeding check the contents and familiarise yourself with the internal layout of the cart. Contents:- 2 sets x front and rear door keys (located on top of cart). · IEC adaptor leads - Quantity 16 x IEC to figure eight and clover leaf connectors located inside the · laptop storage area. Mains lead = 13amp plug – IEC connector located inside the power and adaptor storage area. · Cart layout:- IEC power strip Area for mounting a network switch (network switch
Краткое содержание страницы № 3
LAPTOP 16H The LAP16H is specifically designed for the storage and recharging of up to laptops. To assemble/configure your new charging trolley, simply follow the steps below... Ventilation: All vents MUST be kept clear at all times, no posters etc. covering the perforations. Also ensure there is a minimum of 50mm clearance between the back and sides of the cabinet to ensure good air flow. Fans If fans are fitted: Whilst charging, if the temperature in the cabinet exceeds 30° the fans will
Краткое содержание страницы № 4
Step 6: Then place the power pack onto the rear storage area of the top shelf and push the laptops connecting lead through to the front of the shelf. Repeat until all power packs and leads are in place. Step 7: Move to the front of the cabinet, unlock and open the front doors to reveal 8 horizontal laptop shelves. Select one of the connecting leads, previously fed through & plug it into the laptop. Step 8: Place the laptop onto the shelf and repeat until all laptops are connecting and in p
Краткое содержание страницы № 5
Energy Saving 24 Hour Timer The LAP16H is fitted with an energy saving programmable 24 hour timer. Each timer features 2 programable timer options allowing you to set your unit to automatically start charging over 2 separate time periods in one 24 hourcycle. This could be from 6:30am to 8:30am ready for morning classes and then again at 12pm to 1pm ready for afternoon classes. The timer can also be set be set to charge your laptops during the evening or weekend to take advantage of off-peak
Краткое содержание страницы № 6
LAP16H LED Light Display Guide LED Indicator KEY: LED light OFF LED light ON LED light flashing Figure 1 Figure 2 This light Charging in progress combination indicates that NO This light combination charging is taking place. indicates that the unit To start charging is in constant first check the unit is charging mode. switched on then either press the knob for constant charging or set Timer 1 or Timer 2. Figure 3 Figure 4 Charging in progress This light combination indicates that e
Краткое содержание страницы № 7
Undertaking Data Transfer Activities To undertake data transfer activities with the LAP16H you will need to purchase the following items… • Fan Upgrade - Available as an optional upgrade. If ordered at the same time as the LAP16H cart then they will be pre-fitted prior to delivery • Network Lead Loom Kit - Available as an optional upgrade. The kit includes 2 x 8 network lead looms, all bound & pre-cut to the required lengths for easy to install. If ordered at the same time as the LAP16H
Краткое содержание страницы № 8
Frequently Asked Questions Q. I have followed the configuration guidelines yet my laptops do not appear to be charging? A. Is the unit in Timed Charging mode? Open the rear door of the cart to view the power module. View the LED display. (Refer to LED light Display guide on page 10. If fig.3 is displayed then a timed, charging period has been selected but the start time has not yet been reached. To start charging either reset Timer 1 or 2 to the required times or set both ti
Краткое содержание страницы № 9
Safety and Security Guidance • This unit is designed for storage and re-charging of laptops only • To avoid damage, please ensure that the laptops are inserted & removed by an adult or competent person • All vents MUST be kept clear at all times, including allowing enough space between the back of the cabinet and the wall to ensure good air flow (50mm Minimum) • This unit should be used with a switched wall socket ONLY • IMPORTANT - Ensure the wall socket switch is in the ‘off’ pos
