Руководство по эксплуатации Emerson CF805SAB 00

Краткое содержание страницы № 1

READ AND SAVE THESE INSTRUCTIONS
by
®
Model No.
CF805SAB 00 CF804SAB 00
CONTEMPORARY
CF805SPB 00 CF804SPB 00
CF805SWW 00 CF804SWW 00
SNUGGER
CF805SW 00 CF804SW 00
CF805SBS 00
Ceiling Fan
CF805SS 00
Owner's Manual
Net Weight: 16.1 Lbs. Net Weight: 11.0 Lbs.
LIMITED WARRANTY
What The Warranty Covers:
This warranty covers the motor and the other components and accessories of your Emerson ceiling fan against all defects in workmanship and materials.
You must be the original purchaser or user of th

Краткое содержание страницы № 2

! WARNING WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference. 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a warning device, such as a tag, to the service panel. 3. Be careful of

Краткое содержание страницы № 3

This Manual Is Designed to Make it as Easy as Possible for You to Assemble, Install, Operate and Maintain Your Ceiling Fan Installed Wire Length Wire Size A.W.G. Tools Needed for Assembly Up to 50 ft. 14 One Phillips head screwdriver 50 - 100 ft. 12 One 1/4" blade screwdriver One stepladder One wire stripper ! WARNING Three wire connectors (supplied) Before assembling your ceiling fan, refer to section on Materials proper method of wiring your fan (page 5). If you feel you do not have enough wir

Краткое содержание страницы № 4

Electrical Requirements Your new ceiling fan will require a grounded electrical ! WARNING supply line of 120 volts AC, 60 Hz, 15 amp circuit. The outlet box must be securely anchored and Turning off wall switch is not sufficient. To avoid possible electrical shock, be sure electricity is capable of withstanding a load of at least 50 pounds. turned off at the main fuse box before wiring. All wiring must be in accordance with National and WARNING ! Local Codes and the ceiling fan must be properly

Краткое содержание страницы № 5

3. Once wiring is completed, lift the motor bracket so that the four threaded studs on the mounting plate OUTLET BOX protrude through the four slot in the motor bracket. (See Figure 4.) Securely tighten the four 1/4” locknuts (supplied) MOUNTING 1/4" LOCKNUTS onto the threaded studs, then try to shake the PLATE (SUPPLIED) (4) motor bracket to ensure that the assembly is tight. MOTOR Proceed to section "HOW TO PUT YOUR CEILING BRACKET FAN TOGETHER". FAN MOTOR SWITCH HOUSING Figure 4 How To Wire Y

Краткое содержание страницы № 6

How To Put Your Ceiling Fan Together 1. Align the four holes in the fan housing with the holes in the mounting plate and install four 3/16-24 x 3/8" screws (Figure 6). 3/16-24 x 3/8" SCREW 3/16-24 x 9/32" WASHER HEAD SCREWS (3) BLADE FLANGE FAN BLADE Figure 7 FAN HOUSING NOTE: Take care not to scratch the fan housing when installing the blade assemblies. Figure 6 2. Mount the blade flanges to the fan blades using three 3/16-24 x 9/32" washer head screws per BLADE blade (supplied) (Figure 7). R

Краткое содержание страницы № 7

! WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN. Trouble Shooting TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not 1. Reversing switch in neutral position. 1. Make sure reversing switch position is start. all the way to one side. 2. Fuse or circuit breaker blown. 2. Check main and branch circuit fuses or circuit breakers. 3. Loose power line connections to the fan, 3. Check line wire connections to fan and or loose switch w

Краткое содержание страницы № 8

Repair Parts List Model No. Key No. Description CF805SWW 00 CF805SPB 00 CF805SAB 00 CF805SW 00 CF805SBS 00 CF805SS 00 CF804SWW 00 CF804SPB 00 CF804SAB 00 CF804SW 00 1 Switch Housing Assembly 761533-2 761533-1 761533 761533-4 761533-5 761533-8 760384 760384-1 760384-2 760384-3 2 Flange Assembly (set of 5) 761554 761554-1 761554-2 761554-3 761554-4 761554-7 761535 761535-1 761535-2 761535-3 3 Blade Assembly (set of 5) 761548 761548-1 761548-1 761548-2 761548-5 761548-6 761542 761542-1 761542-1 761