Краткое содержание страницы № 1
OUTDOOR STORAGE
MODEL N° 6424
OWNER’S MANUAL
Keep this Identification Number in case you need to contact our Customer Service Department.
Краткое содержание страницы № 2
IMPORTANT! PLEASE READ BEFORE BEGINNING ASSEMBLY Dear Valued Customer, We would like to congratulate you on your purchase of a Lifetime© Outdoor Storage Shed! We are confi dent that you have made the perfect choice and you will be very pleased with your new storage solution. Lifetime© Outdoor Storage is part of the family of products created and manufactured by Lifetime® Products, Inc. Like all of our products, you can be assured that the quality of your Lifetime Outdoor Storage Shed is the
Краткое содержание страницы № 3
IMPORTANT! PLEASE READ BEFORE BEGINNING ASSEMBLY inventory of the parts included with your Outdoor Storage Shed. Also, read through the entire instruc- tion manual. It’s always a great practice to get a feel for the fl ow of the process and to familiarize your- self with the parts involved. But, try not to get ahead of yourself and start the process out of order. learned what that correct order should be. In our state-of-the-art research and testing facility, we have painstakingly creat
Краткое содержание страницы № 4
REGISTER YOUR LIFETIME PRODUCT TODAY! There are benefi ts to registering your Lifetime product. With our new online product registration form, it’s fast and easy! Register with us at www.lifetime.com and enjoy these great benefi ts: promotions! But you will need to provide a sales receipt to verify your product purchase date before warranty service will be provided. LIFETIME’S PROMISE TO YOU: Maintaining your privacy is our long-standing policy at Lifetime. And you can rest assured that
Краткое содержание страницы № 5
BEFORE BEGINNING ASSEMBLY Keep the hardware bags and their contents separate. If any parts are missing, call our Customer Service Department. Identify and inventory all parts and hardware using the parts and hardware lists and identifi ers in this document. *Two adults required to complete assembly* (+ one adult suggested as an instruction reader) Only adults should set up the product. Do not allow children in the set-up area until assembly is complete. IF YOU ARE INSTALLING A NEW SH
Краткое содержание страницы № 6
ASSEMBLY GUIDES Refer to the following areas throughout the instructions to assist in the assembly process: This area is located at the top, left-hand TOOLS AND HARDWARE REQUIRED FOR THIS PAGE corner of the page and indicates which tools and hardware are needed to complete the assembly steps on a page. This area is located at the top, right-hand # corner of the page and shows an image of the product with shaded parts indicating which section is being assembled. This area is usually locate
Краткое содержание страницы № 7
IMPORTANT NOTICES Level Surface Notice: Surface must be leveled before installation. We recommend building a level work space with a concrete or patio style surface. If the surface is not properly leveled, the Outdoor Shed will not assemble correctly. Proper surface leveling will save you time in the long run, so please do not ignore this step. Building Code Notice: Consult all local building codes, as well as city and county ordinances, to ensure that the construction of the Outdoor Shed doe
Краткое содержание страницы № 8
PARTS & HARDWARE LIST ID Description Quantity ID Description Quantity Main Parts BJM 6424 Hardware Bag AHD Wall Panel 1 BEA Truss Assembly Hardware AHH Window Wall Panel 1 AIP Truss Connector 1 AHE Window 1 AHC Skylight 1 ADH 1/4” Threaded Rod 1 BDZ Tool Bag BGT Wall & Roof Installation Hardware ADZ 1/4” x 5/8” Phillips Pan-Head Screw 45 BGS Skylight Installation Hardware BEJ Window Installation ADZ 1/4” x 5/8” Phillips
Краткое содержание страницы № 9
HARDWARE IDENTIFIER SKYLIGHT INSTALLATION HARDWARE [BGS] Hardware shown at actual size ADX (x6) AED (x6) WINDOW INSTALLATION HARDWARE [BEJ] Hardware shown at actual size ADZ (x4) ADY (x1) 1/4” x 5/8” Phillips Pan-Head Screw AIS Window Latch PARTS IDENTIFIER Part shown at 4% of actual size AFX (x1) AHD (x1) Center Floor Panel Wall Panel AHH (x1) AGQ Window Wall Panel Roof Panel AFY (x1) Center Roof Cap 9
Краткое содержание страницы № 10
PARTS IDENTIFIER Parts shown at 8% of actual size AFL Roof Support Strip 48” AFG (x1) Roof Truss Brace 51” Notched end goes over AFH Wall Panel. AHC (x1) AHE (x1) Skylight Window Note: Throughout the Parts & Hardware List, Part & Hardware Identifiers, and instructions are three- letter IDs. These IDs are below the images of the parts and hardware to help you locate and identify ! the parts and hardware during assembly. These IDs are not necessarily on the parts themselves. 10
Краткое содержание страницы № 11
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 1 NO HARDWARE REQUIRED FOR THIS PAGE **SAVE ALL HARDWARE FOR RE-ASSEMBLY!** SHED DISASSEMBLY SEC Remove last three Skylights and set aside. 1.1 ! Note: You’re Shed may be a different length than the Shed shown, but the ideas are the same. SEC SEC 1.2 Remove the back two Center Roof Caps and the 1.3 Remove the back Roof Panels and Roof End Roof Cap and set aside. Support Strips and set aside. 11 SEC
Краткое содержание страницы № 12
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 1 NO HARDWARE REQUIRED FOR THIS PAGE **SAVE ALL HARDWARE FOR RE-ASSEMBLY!** SEC Remove the next Roof Panels and Roof Support Strips and set aside. 1.4 SEC 1.5 Remove the Roof Truss Assembly and set aside. 12 SEC
Краткое содержание страницы № 13
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 1 NO HARDWARE REQUIRED FOR THIS PAGE **SAVE ALL HARDWARE FOR RE-ASSEMBLY!** SEC Remove the last two side Wall Panels and set aside. 1.6 SEC 1.7 order to disconnect the Floor Panels Note: One person should support the rear Wall ! while it is being tipped and moved. Note: Ensure there is nothing on the rear Shelves before moving the rear section of the Shed. ! 13 SEC
Краткое содержание страницы № 14
FLOOR ASSEMBLY 2 HARDWARE REQUIRED NO HARDWARE REQUIRED FOR THIS SECTION METAL PARTS REQUIRED NO METAL PARTS REQUIRED FOR THIS SECTION PLASTIC PARTS REQUIRED Part shown at 4% of actual size AFX (x1) Center Floor Panel TOOLS REQUIRED Safety Glasses 14 SEC
Краткое содержание страницы № 15
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 2 NO HARDWARE REQUIRED FOR THIS PAGE SEC Add new Center Floor Panel (AFX) 2.1 need to tip the rear section forward slightly to connect the Center Floor Panels. AFX Note: Tip up one floor panel and line up tabs and then lay floor panel flat. ! 15 S SEC SEC
Краткое содержание страницы № 16
TRUSS ASSEMBLY 3 HARDWARE REQUIRED Hardware shown at actual size ADY (x6) ADK (x6) ADJ 1/4” Cap Nut METAL PARTS REQUIRED Parts shown at 8% of actual size (*Unless indicated otherwise) 51” AFH 48” AFG (x1) Roof Truss Brace (Not to Scale) *AIP (x1) Truss Connector Part shown at 50% of actual size 12 11/16” ADH (x1) 1/4” Threaded Rod PLASTIC PARTS REQUIRED NO PLASTIC PARTS REQUIRED FOR THIS SECTION TOOLS REQUIRED Phillips Screwdriver 7/16” Wrench 3/8” Wrench Safety Glasses 16 SEC
Краткое содержание страницы № 17
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 3 3/8” ADY (x1) ADK (x1) TRUSS ASSEMBLY SEC Stand a Truss Gutter Channel (AFH) upright and set a Truss Connector (AIP) inside the end of the Channel as shown. 3.1 Align the holes and secure with one (1) #10 x 3/8” Pan-Head Screw (ADY) and one (1) #10 Cap Nut (ADK). AIP AIP ADY ADK AFH AFH Notch 17 S SEC
Краткое содержание страницы № 18
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 3 3/8” ADY (x1) ADK (x1) SEC Connect another Truss Gutter Channel (AFH) to the Truss Connector using one (1) #10 x 3/8” Pan-Head Screw (ADY) and 3.2 one (1) #10 Cap Nut (ADK). Notch AFH ADY AFH AIP ADK AFH Notch 18 S SEC
Краткое содержание страницы № 19
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 3 3/8” ADK (x4) ADY (x4) SEC Lay the Truss Assembly on its side, and align the holes in a Roof Truss Brace (AFG) with those circled on the Truss 3.3 AFG SEC #10 x 3/8” Pan-Head Screws (ADY) 3.4 #10 Cap Nuts (ADK). Repeat this step for the other end of the Roof Truss Brace. ADK ADY ADK WARNING Do not overtighten the Cap Nut. If the end of the Bolt breaks through the plastic cap, call our Customer Service Department. Exposed threads Note: The C
Краткое содержание страницы № 20
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 3 7/16” ADJ 12 11/16” ADH (x1) (Not to scale) SEC With the Truss Assembly on its side, slide a 1/4” Threaded Rod (ADH) through the Roof Truss Brace and Truss 3.5 Connector as shown. Secure the top and bottom of the 1/4” Threaded Rod with a 1/4” Cap Nut (ADJ). Tighten all hardware. The 1/4” Threaded Rod will still spin freely. Set aside. ADH ADJ ADJ WARNING Do not overtighten the Cap Nut. 20 S SEC
