Краткое содержание страницы № 1
model h5977
flooring stapler
instruction manual
Copyright © MarCh, 2004 By grizzly industrial, inC., revised deCeMBer, 2009 (ts)
Warning: no portion of this manual may be reproduced in any shape
or form Without the Written approval of grizzly industrial, inc.
(For staplers ManuFaCtured sinCe 2/07) #tr6136 printed in China
Краткое содержание страницы № 2
safety for your own safety read instruction manual before operating this equipment the purpose of safety symbols is to attract your attention to possible hazard- ous conditions. this manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. the progression of symbols is described below. remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures. indic
Краткое содержание страницы № 3
safety instructions for pneumatic tools 10. use proper air hose for the 19. disconnect tools before ser- tool. Make sure your air hose is in vicing and changing accessories. good condition and is long enough to 20. use the recommended reach your work without stretching. accessories. Consult the owner’s manual for recommended 11. Wear proper apparel . do accessories. the use of improper not wear loose clothing, gloves, accessories may increase the risk neckties, rings, bracelets, or other
Краткое содержание страницы № 4
basic stapler safety in addition to the rules stated in the previ- ous section, and those in the warning boxes throughout this manual, please observe the following safety tips for your new stapler: 1. r ead this entire manu - al before operating the stapler. 2. alWays disconnect air from the stapler Whenever ser- vicing or installing staples. o perating this stapler can propel during maintenance, a stapler con- objects into the air, causing imme- nected to air may fire accidentally, diate
Краткое содержание страницы № 5
introduction Most importantly, we stand behind our commentary tools. if you have any service questions or We are proud to offer the grizzly Model parts requests, please call or write us at h5977 Flooring stapler. this model is part the location listed below. of a growing grizzly family of fine tools. When used according to the guidelines set grizzly industrial, inc. forth in this manual, you can expect years 1203 lycoming Mall Circle of trouble-free, enjoyable operation and Muncy, pa 1
Краткое содержание страницы № 6
compressed air system firing mechanism the Model h5977 is designed to be oper- When the firing mechanism is working ated at 60-100 psi. the maximum permis- properly, the stapler does not fire when sible operating pressure for this stapler is immediately connected to the air supply. 100 psi. do not exceed 120 psi! this stapler is equipped with a “whack Before using, install a male quick connect cap," which when hit with the mallet will fitting on the stapler. regulate the air pres- fire the s
Краткое содержание страницы № 7
operation oiling stapler loading stapler place one or two drops of pneumatic tool oil When replacing staples in your model h5977, follow these guidelines: in the stapler air inlet (as shown in figure 1) before every use. Wipe off any excess 1 gauge: 15 ⁄2 oil near the stapler exhaust to avoid dust staple sizes: 1"–2" build-up. Capacity: 60 to load your stapler: 1. disconnect the air supply from the stapler! 2. slide back the magazine loading han- dle until it locks. 3. load a staple stick
Краткое содержание страницы № 8
4. u sing the included mallet, hit the operating stapler whack cap with light/medium force to shoot a staple into the wood. if you have not read the safety instruc- 5. Check the staple for proper depth and tions in this manual, do not operate placement. the stapler. — if the depth is satisfactory, then proceed with your project. Before you operate your stapler, place one — if the depth is too shallow, then drop of pneumatic tool oil into the quick slightly increase the air pressure c
Краткое содержание страницы № 9
clearing Jammed staples cleaning stapler this stapler may accidentally fire if you work on it without disconnecting vapors from cleaning with gasoline it from the air supply. always discon- or flammable liquids could ignite and nect air from stapler whenever clear- cause an explosion. never use highly ing a jammed staple! flammable liquids to clean the stapler and thoroughly dry all cleaned parts before reassembling or operating. to clear a jammed staple from the dis- charge area on the m
Краткое содержание страницы № 10
notes Model h5977 (Mfg. since 2/07) -9-
Краткое содержание страницы № 11
h5977 part breaKdoWn 135 133 137 136 132 131 138 130 129 128 127 126 134 165 125 124 166 123 122 151 139 138 137 119 152 150 153 118 154 148 115 117 114 146 155 116 145 147 156 113 143 112 149 142 157 111 141 110 109 144 140 109-1 105 134 108 104 103 158 161 107 159 162 164 106 101 160 163 -10- Model h5977 (Mfg. since 2/07)
Краткое содержание страницы № 12
REF PART # DESCRIPTION REF PART # DESCRIPTION 101 PH5977101 CYLINDER 136 PH5977136 HANDLE GRIP 103 PH5977103 BUMPER 137 PLN04M LOCK NUT M8-1.25 104 PORP050 O-RING 49.7 X 3.5 P50 138 PW01M FLAT WASHER 8MM 105 PH5977105 DRIVER 139 PH5977139 L-BOLT 106 PRP07M ROLL PIN 6 X 20 140 PH5977140 CYLINDER HEAD SEAT 107 PSS31M SET SCREW M5-.8 X 8 141 PH5977141 NAIL GUIDE COVER 108 PH5977108 PISTON POLE 142 PH5977142 NAIL GUIDE 109 PH5977109 PISTON CAP 143 PH5977143 DRIVER GUIDE 110 PORP012-5 O-RING 12.3 X 2
Краткое содержание страницы № 13
troubleshooting problem cause action air leaking from stapler 1. Fasteners loose. 1. tighten. 2. Worn/damaged o-rings or 2. replace. body assembly joint. gaskets. 1. loose air fitting. 1. tighten air fitting. air leaking between hous- ing and hose. 2. loose screws in housing. 2. tighten screws. 3. damaged o-ring. 3. replace o-ring. tool skips staples while 1. air leaks. 1. tighten screws and fit- discharging. tings. 2. dirt in nose. 2. Clean nose. 3. dirt or damage prevents 3. Clean magazine and
Краткое содержание страницы № 14
Warranty and returns grizzly industrial, inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. this warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. this is grizzly’s sole written warranty and any and all warranties that may be implied by law, including any merchantability or fitness, for any particular purpose, are hereby limited to
Краткое содержание страницы № 15
Warranty card name_____________________________________________________________ street_____________________________________________________________ City____________________state________zip_________ phone number____________e-Mail___________________FaX____________ model #_______________serial#________________order #______________ the following information is given on a voluntary basis. it will be used for marketing purposes to help us develop better products and services. of course, all informati
Краткое содержание страницы № 16
send a grizzly Catalog to a friend: name________________________________ street________________________________ City______________state______zip_______ Fold along dotted line place stamp here grizzly industrial, inc. p.o. box 2069 bellingham, Wa 98227-2069 tape along edges--please do not staple
