Краткое содержание страницы № 1
OWNER’S MANUAL
Краткое содержание страницы № 2
Table of Contents Product Registration ..2 Important Safety Instructions .. 3 Important Electrical Information .. 4 Important Operation Instructions . 5 Assembly instructions 6 Operation of Your New Treadmill .9 General Maintenance. .. 12 Service Checklist - Diagnosis Guide .. 15 Manufacturer s Limited Warranty . 16 ET188 1
Краткое содержание страницы № 3
CONGRATULATIONS ON YOUR NEW TREADMILL AND WELCOME TO THE SPIRIT FAMILY! Thank you for your purchase of this quality treadmill from Spirit Manufacturing, Inc. Your new treadmill was manufactured by one of the leading fitness manufacturers in the world and is backed by one of the most comprehensive warranties available. Through your dealer, Spirit will do all we can to make your ownership experience as pleasant as possible for many years to come. The local dealership where you purchased this tread
Краткое содержание страницы № 4
Important Safety Instructions WARNING - Read all instructions before using this appliance. DANGER - To reduce the risk of electric shock disconnect your Spirit treadmill from the electrical outlet prior to cleaning and/or service work. WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons, install the treadmill on a flat level surface with access to a 120-volt, 15-amp grounded outlet. DO NOT USE AN EXTENSION CORD UNLESS IT IS 14AWG OR BETTER, WITH ONLY ONE OUTLET ON T
Краткое содержание страницы № 5
Important Electrical Information WARNING! l NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Large switching currents of the drive motor will trip GFCI type outlets, as any appliance with a large motor will. Route the power cord away from any moving part of the treadmill including the elevation mechanism and transport wheels. l NEVER remove any cover without first disconnecting AC power. l If voltage varies by ten percent (10%) or more, the performance of your t
Краткое содержание страницы № 6
Important Operation Instructions l NEVER operate this treadmill without reading and completely understanding the results of any operational change you request from the computer. l Understand that changes in speed and incline do not occur immediately. Set your desired speed on the computer console and release the adjustment key. The computer will obey the command gradually. l NEVER use your treadmill during an electrical storm. Surges may occur in your household power supply that could damage tre
Краткое содержание страницы № 7
ASSEMBLY PACK CHECK LIST #60 - M5 x 15mm #84 - 5/16 x 1/2 Phillips Head Screw (4pcs) Button Head Socket Bolt (2pcs) (These four screws are attached to the back of the console) #71 - 3/8 x 19mm #65 - 3/8 #69 - 5/16 x 18mm Flat Washer (2pcs) Nyloc Nut (2pcs) Flat Washer (6pcs) #83 - 5/16 x 3 #55 - 3/8 x 46mm Button Head Socket Bolt (4pcs) Button Head Socket Bolt (2pcs) #94 - Short Phillips Head #87 - Lubricant (1pc) #37 - Safety Key (1pc) Screw Driver (1pc) #85 - M5/M6 Allen Wrench (1pc) #86 - 1
Краткое содержание страницы № 8
Assembly Instructions for ET188 n STEP 1 Remove all the parts from the carton. n STEP 2 Raise the upright supports into place as shown. Secure the uprights with the four 5/16 x socket head bolts (83) and 5/16 flat washers (69). ET188 7
Краткое содержание страницы № 9
n STEP 3 Install, and just hand tighten for now, the two 5/16 x 1/2 socket head bolts (84) and 5/16 flat washers (69) into the front of the left and right upright tubes. Now install the 3/8 x 46mm socket head bolts (55) from the outside of the upright tubes, 3/8 flat washers (71) and 3/8 nuts from the inside of the uprights and tighten all four bolts as tight as possible. n STEP 4 Connect the computer cable (38) and pulse sensor wires (93) to the mating connectors on the back of the console
Краткое содержание страницы № 10
Operation of Your Treadmill GETTING STARTED: Power the treadmill on by plugging it into a grounded wall outlet, then turn on the power switch located at the front of the treadmill below the motor hood. Ensure that the safety key is installed, as the treadmill will not operate without it. When the power is initially turned on, the display will light up and then show an Odometer and Time reading. The odometer reading shows how many virtual miles the treadmill gone and Time shows how many hours it
Краткое содержание страницы № 11
WINDOW DISPLAYS: DISTANCE: Accumulates total workout distance from 0.00 to 99.99 miles (km). TIME: Accumulates total workout time from 00:00 to 99:59. CALORIES: Accumulates the user s calorie consumption during exercise. PROGRAM: Indicates which program is currently running. LAPS: Counts the number of laps you have gone around the ¼ mile track. PULSE: Shows your heart rate in beats per minute SPEED Shows your current walking/running speed in Miles Per Hour. LUBE: Reminds us
Краткое содержание страницы № 12
PRESET PROGRAMS (P1, P2, P3) • Program 1 is a walking program 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 P1 Speed settings in mph for each segment of the profile: P1 0.6 0.7 0.9 1.0 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.0 0.9 0.7 0.6 • Program 2 is a Jogging program 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 910 1112131415 1617181920 P2 Speed settings in mph for each segment of the profile P2 1.9 2.1 2.6 3.0 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.0 2.6 2.1 1.
Краткое содержание страницы № 13
General Maintenance Belt and Bed - Your treadmill uses a very high-efficient low-friction bed. Performance is maximized when the bed is kept as clean as possible. Use a soft, damp cloth or paper towel to wipe the edge of the belt and the area between the belt edge and frame. Also reach as far as practical directly under the belt edge. This should be done once a month to extend belt and bed life. Use water only - no cleaners or abrasives. A mild soap and water solution along with a nylon scrub br
Краткое содержание страницы № 14
TREADBELT TRACKING ADJUSTMENT: The performance of your treadmill is dependent on the frame running on a reasonably level surface. If the frame is not level, the front and back roller cannot run parallel, and constant belt adjustment may be necessary. The treadmill is designed to keep the tread-belt reasonably centered while in use. It is normal for some belts to drift near one side while the belt is running with no one on it. After a few minutes of use, the tread-belt should have a tendency to c
Краткое содержание страницы № 15
BELT / DECK LUBRICATION: Do not lubricate with other than Spirit approved lubricant. Your treadmill comes with one tube of lubricant and extra tubes can be ordered directly from Spirit. There are commercially available lube kits, but the only one currently approved by Spirit is Lube-N-Walk. These kits come with an application wand that makes applying the lubrication easier. The kits can be purchased from Spirit or directly from Lube-N-Walk here: http://www.jadfitness.com/ When ordering make sure
Краткое содержание страницы № 16
Service Checklist - Diagnosis Guide Before contacting your dealer for aid, please review the following information. It may save you both time and expense. This list includes common problems that may not be covered under the treadmill s warranty. PROBLEM SOLUTION/CAUSE Display does not light Tether cord not in position. Circuit breaker on front grill tripped. Push circuit breaker in until it locks. Plug is disconnected. Make sure plug is f
Краткое содержание страницы № 17
Manufacturer s Limited Warranty Effective July 15, 2009 TREADMILL LIMITED WARRANTY Spirit Fitness Inc. warrants all its home use treadmill parts for a period of time listed below, from the date of retail sale, as determined by a sales receipt or in the absence of a sales receipt, eighteen (18) months from the original factory shipping date. Spirit s responsibilities include providing new or remanufactured parts, at Spirit s option, and technical support to our independent dealers and servicing
