Краткое содержание страницы № 1
DO NOT
DISCARD
Owner’s Manual
Installation and Operation
Models:
ST-36TR-IPI
ST-36TRLP-IPI
PIER-36TR-IPI
PIER-36TRLP-IPI
NOTICE
DO NOT DISCARD THIS MANUAL
• Important operating • Read, understand and follow • Leave this manual with
and maintenance these instructions for safe
party responsible for use
instructions included. installation and operation.
and operation.
WARNING
WARNING: If the information in these
HOT SURFACES!
instructions is not followed exactly, a fi re
Glass and other surfac
Краткое содержание страницы № 2
Read this manual before installing or operating this appliance. Please retain this owner’s manual for future reference. This owner’s manual should be retained for future A. Congratulations reference. We suggest that you keep it with your other Congratulations on selecting a Heat & Glo gas fi replace, an important documents and product manuals. elegant and clean alternative to wood burning fi replaces. The information contained in this owner’s manual, unless The Heat & Glo gas fi replace you h
Краткое содержание страницы № 3
Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury. • WARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury. • CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. • NOTICE: Used to address practices not related to personal injury. Table of Contents A. Congratulations . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 4
13 Finishing A. Splatter Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 B. Mantel and Wall Projections . . . . . . . . . . . . . . . . . . . . . . . 59 C. Facing Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 D. Finishing Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 E. Elevated Hearth Systems . . . . . . . . . . . . . . . . . . . . . . . . . 63 14 Appliance Setup A. Remove Fixed Glass Assembly . . . . . .
Краткое содержание страницы № 5
B. Limited Lifetime Warranty Hearth & Home Technologies Inc. LIMITED LIFETIME WARRANTY Hearth & Home Technologies Inc., on behalf of its hearth brands (”HHT”), extends the following warranty for HHT gas, wood, pellet, coal and electric hearth appliances that are purchased from an HHT authorized dealer. WARRANTY COVERAGE: HHT warrants to the original owner of the HHT appliance at the site of installation, and to any transferee taking ownership of the appliance at the site of installation with
Краткое содержание страницы № 6
B. Limited Lifetime Warranty (continued) WARRANTY CONDITIONS: WARRANTY EXCLUSIONS: - - - - - This warranty is void if: LIMITATIONS OF LIABILITY: 4021-645C 12-29-10 Page 2 of 2 6 Heat & Glo • ST-36TR-IPI, PIER-36TR-IPI • 2176-900 Rev. F • 8/11
Краткое содержание страницы № 7
Listing and Code Approvals 1 1 A. Appliance Certifi cation C. BTU Specifi cations Maximum Minimum Orifi ce MODELS: ST-36TR-IPI, ST-36TRLP-IPI, PIER-36TR-IPI, Models Input Input Size (U.S. or Canada) PIER-36TRLP-IPI BTU/h BTU/h (DMS) US LABORATORY: Underwriters Laboratories, Inc. (UL) 37,000 26,000 32 (0-2000 FT) ST-36TR-IPI TYPE: Direct Vent Gas Appliance Heater PIER-36TR-IPI CANADA 34,500 23,900 33 STANDARD: ANSI Z21.88-2007 • CSA 2.33a-2007 (2000-4500 FT) US 36,000 27,000 50 (0-2000 FT) ST-
Краткое содержание страницы № 8
Inspection Note: The following requirements reference various The state or local gas inspector of the side wall horizon- Massachusetts and national codes not contained in this tally vented gas fueled equipment shall not approve the document. installation unless, upon inspection, the inspector ob- serves carbon monoxide detectors and signage installed H. Requirements for the Commonwealth of in accordance with the provisions of 248 CMR 5.08(2)(a)1 Massachusetts through 4. For all side wall
Краткое содержание страницы № 9
User Guide Operating Instructions 2 2 • Keep remote controls out of reach of children. A. Gas Fireplace Safety • Never leave children alone near a hot fi replace, whether operating or cooling down. WARNING • Teach children to NEVER touch the fi replace. HOT SURFACES! Glass and other surfaces are hot during • Consider not using the fi replace when children will be operation AND cool down. present. Hot glass will cause burns. Contact your dealer for more information, or visit: www. • DO NOT t
Краткое содержание страницы № 10
CLEAR SPACE 3 FT. IN FRONT OF FIREPLACE C. Blower Kit (optional) E. Decorative Doors and Fronts If desired, a blower kit may be added. Contact your deal- WARNING! Risk of Fire! Install ONLY doors or fronts er to order the correct blower kit. approved by Hearth & Home Technologies. Unapproved doors or fronts may cause fi replace to overheat. Blower Installation This fireplace has been supplied with an integral 1. Place blower in appliance as shown in Figure 2.2. barrier to prevent direct cont
Краткое содержание страницы № 11
I. Lighting Instructions (IPI) The IPI system may be operated with two D-cell batteries. To prolong battery life, remove them when using the transformer. FOR YOUR SAFETY LIGHTING READ BEFORE LIGHTING INSTRUCTIONS (IPI) WARNING: If you do not follow these instructions exactly, a fi re or explosion 1. This appliance is equipped with an ignition may result causing property damage, personal injury or loss of life. device which automatically lights the burner. DO NOT try to light the burner by hand
Краткое содержание страницы № 12
J. After Fireplace is Lit Initial Break-in Procedure • The fireplace should be run three to four hours continuously on high. • Turn the fi replace off and allow it to completely cool. • Remove fi xed glass assembly. See Section 14.G. • Clean fi xed glass assembly. See Section 3. • Replace the fi xed glass assembly and run continuously on high an additional 12 hours. This cures the materials used to manufacture the fi re- place. NOTICE! Open windows for air circulation during fi re- place break-in. •
Краткое содержание страницы № 13
Maintenance and Service 3 3 Doors, Surrounds, Fronts Any safety screen or guard removed for servicing must be replaced prior to operating the fi replace. Frequency: Annually By: Homeowner When properly maintained, your fi replace will give you many years of trouble-free service. We recommend an- Tools needed: Protective gloves, stable work surface nual service by a qualifi ed service technician. • Assess condition of screen and replace as necessary. A. Maintenance Tasks-Homeowner • Ins
Краткое содержание страницы № 14
Ember Light Replacement B. Maintenance Tasks-Qualifi ed Service Technician Frequency: As Required The following tasks must be performed by a qualifi ed ser- By: Homeowner or Qualifi ed Service Technician vice technician. Tools needed: Protective gloves, 5/16 in. nut driver Gasket Seal and Glass Assembly Inspection In the lower gas valve compartment you will fi nd three ac- Frequency: Annually cess panels for the three light bulbs. See Figure 3.1 By: Qualifi ed Service Technician Tools needed: Pr
Краткое содержание страницы № 15
Burner Ignition and Operation Frequency: Annually By: Qualifi ed Service Technician Tools needed: Protective gloves, vacuum cleaner, whisk broom, fl ashlight, voltmeter, indexed drill bit set, and a manometer. • Verify burner is properly secured and aligned with pilot or igniter. • Clean off burner top, inspect for plugged ports, corrosion or deterioration. Replace burner if necessary. • Replace ember materials with new dime-size pieces. DO NOT block ports or obstruct lighting paths. Refer
Краткое содержание страницы № 16
Installer Guide Getting Started 4 4 A. Typical Appliance System NOTICE: Illustrations and photos refl ect typical installations and are for design purposes only. Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual HORIZONTAL NON-COMBUSTIBLE ROOF FLASHING TERMINATION CAP MAINTAINS MINIMUM CLEARANCE (SECTION 10.M ) AROUND PIPE (SECTION 10.G) VERTICAL TERMINATION CAP (SECTION 10.J) STORM COLLAR (SECTION 10.H) VENT PIPE PENETRATES ROOF PREFERABLY W
Краткое содержание страницы № 17
B. Design and Installation Considerations D. Inspect Appliance and Components Heat & Glo direct vent gas appliances are designed to • Carefully remove the appliance and components from operate with all combustion air siphoned from outside of the packaging. the building and all exhaust gases expelled to the outside. • The vent system components and decorative doors and No additional outside air source is required. fronts may be shipped in separate packages. Installation MUST comply with loca
Краткое содержание страницы № 18
Framing and Clearances 5 5 NOTICE: Illustrations refl ect typical installations and are A. Selecting Appliance Location FOR DESIGN PURPOSES ONLY. Illustrations/diagrams When selecting a location for the appliance it is important to are not drawn to scale. Actual installation may vary due to consider the required clearances to walls (see Figure 5.1). individual design preference. WARNING! Risk of Fire or Burns! Provide adequate clearance around air openings and for service access. Due to
Краткое содержание страницы № 19
300ºF continuous exposure rating to seal gaps. Gas line B. Constructing the Appliance Chase holes and other openings should be caulked with caulk A chase is a vertical box-like structure built to enclose the with a minimum of 300ºF continuous exposure rating or gas appliance and/or its vent system. In cooler climates stuffed with unfaced insulation. If the appliance is being the vent should be enclosed inside the chase. installed on a cement slab, a layer of plywood may be NOTICE: Treatme
Краткое содержание страницы № 20
A E I I H G C B F D AB C D E F G H I DVP Pipe SLP Pipe DVP Pipe* Rough Rough PIER-36TR-IPI Clearance Combustible Combustible Ends of Sides of Rough Rough Rough Opening Opening to Ceiling Floor Flooring Appliance Appliance Opening Opening Opening (Height) (Width) (Width) (Width) (Depth) Inches 10 8-5/8 38-1/8 23 40 31-5/8 0 0 1/2 36 Millimeters 254 219 968 584 1046 803 0 0 13 914 * Adjust framing dimensions for interior sheathing (such as sheetrock) Figure 5.3 Clearances to Combustibles PIER
