Краткое содержание страницы № 1
User's manual
XPB65-27QGS
Twin-tub Washing Machine
Contents
Before using
Names of the parts.............the 2nd cover
Safety precautions ...............................1
Installation and adjustment ..................3
Introduction of the major functions .......5
Using process
Preparation before washing ................6
The musts in washing .........................7
Usage of the detergent .......................8
Washing sequence ..............................9
Disposal after washing ..........
Краткое содержание страницы № 2
Before Using Before Using Names of the parts Buzzer Water-filling entrance Outer cover of the spin tub Water inlet selector handle Inner cover of the spin tub Wash selector Spin timer Wash timer Spin tub frame Control panel Overflow filter Spin tub Water level adjusting lever Drain hose hanging hole Cabinet Lint filter Power cord Valve cover Pulsator Wash tub Drain hose Base frame Accessories Water inlet hose (1 piece ) Gland (1 piece ) Meaning and description o
Краткое содержание страницы № 3
Before Using Before Using Safety precautions Be sure to use three-phase receptacle. When the machine is normally using, please Earth the earthing terminal of the put the power plug at the location easily to receptacle reliably. be inserted and extracted by hand. Be sure to pull the plug off when there'spower failure, or the machine is being moved, cleaned or when it is idle. Earth If the power cord is bad, to avoid risk it is required to replace it by the technicians of our special
Краткое содержание страницы № 4
Before Using Before Using Safety precautions Do not stretch hands into the working Do not decompose, repair or alter the machine. It is dangerous even if the machine by yourself. rotation is slow. Take special care of the children. Do not put any hot or heavy items Do not wash laundries with volatile ( such as the kettle with hot water ) materials (such as thinner, petrol etc.). on the washing machine. Handicapped or children withou
Краткое содержание страницы № 5
Before Using Before Using Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Usage of the drain hose The drainage shall be smooth with the drain hose. 1.The height of the drain hose shall be 3 If the drain hose is too long, cut it at mid less than 10cm , or the drainage will point. To make smooth drainage, cut the not be smooth e
Краткое содержание страницы № 6
Before Using Before Using How to change the direction of the drain hoses Figure 1 indicates the ex factory installation position of the drain hose. Extend the drain hose from the side of spin tub. Take off the drain hose from the hanging Drain hose fixing hook Figure 1 hole of the cabinet. Pull the drain hose fixing hook outwards gently to take out the drain hose from the two fixing hooks. Side sectional view (As per Figure 2) Fixing hook Drain hose installation hole fixing hook
Краткое содержание страницы № 7
Using process Introduction of the major function Using process The machine has good comprehensive performance, and nice appearance. It adopts streamline appearance and full plastic shell, which will never get rust. For the design on safety and reliability, it adopts the wash shelf and water reception groove design, and reduces the unfavorable influence on the electrical component by the vapor. Therefore it guarantees more safe and reliable washing. It adopts comp
Краткое содержание страницы № 8
Using process Preparation before washing Using process Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose . 4.Slanting or uneven ground may result in unstable working or abnormal noise. Please make the machine stand horizontally. Pay attention to followings before w
Краткое содержание страницы № 9
Using process The musts in washing Using process The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity. The largest capacity of this machine is 6.5 kg. The thickness ,size , type of the cloth will influence the actual washing capacity. It is suitable to put in reasonabl
Краткое содержание страницы № 10
Using process Usage of the detergent Using process How to use the whitener Fill water to decided level. Dilute the whitener with container. Pour it slowly into the washing tub. Avoid using whitener on laundries with color or pattern as they are prone to lose color. The whitener shall not touch the laundries directly. Refer to the user's manual for the usage and quantity of the whitener. For powder whitener, please dissolve it before using. How to use the washing powder Di
Краткое содержание страницы № 11
Using process Washing sequence Using process Water-filling selector handle Overfilling sign Wash timer Wash selector Water-filling entrance Buzzer Spin timer (To set to below 2 minute, (gentle current, (The buzzer will ring when (to set to below 1 minute, first set to 5 minute then standard current) the washing finishes) first set to 2 minute then turn it back. it can increase turn it back. it can increase the service life of the timer). the service life of the timer). OFF OFF STAN
Краткое содержание страницы № 12
Using process Using process Midway spinning 1.Put the laundries into the spin tub evenly and smoothly. 2.Spin (1) Put the gland in properly. Please put in the gland properly even if the laundries quantity is smal.l Push Gland Push The laundries Proper Proper No gland are slanting (2) Close the inner and outer cover of the spin tub. Outer cover of The spin tub Inner cover of The spin tub (3) Spin for 1-2 minutes. 3.Run the foam-removing spinning. (1) Open the outer cover of the spin tub.
Краткое содержание страницы № 13
Using process Using process Rinsing Rinse with water-filing OVERFILL 1.Put the laundries into the wash tub. Select suitable current according to the laundries. If the water flows out of the overfill holes, 2.Adjust the water level that is overfilling According to the laundries quantity, set the water level with the adjusting lever. Fill suitable water consecutively. 3.Rinse Adjust the wash timer to 5-7 minutes to do rinsing. (Repeat the midway spinning and
Краткое содержание страницы № 14
Using process Using process Spinning Selection of the spin time list 3 1. Put the laundries into the spin tub evenly and smoothly. Spin time Laundries (minutes) Bed sheet or 2. Press the gland in the tub properly. About 4~5 blanket Close the inner and outer cover of Underwear the spin tub. About 2~4 (knitwear) Swear About 1~2 3. Spin (chemical fiber) Select suitable spin time according Blending thin to the laundries, and do spinning. Within 1 minute laundries Duri
Краткое содержание страницы № 15
Using process Disposal after washing Using process After using, please clean the lint and foreign materials of the lint filter and lint frame in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Cleaning the lint filter The lint filter must be used during washing. It must be cleaned in time after each using. 1. Take off the lint filter Put hand at the indicated position. Push down to take it off. ( See t
Краткое содержание страницы № 16
Using process Using process Cleaning the filter frame 2. Take off the corrugation pipe. Dismantle the upper part of the Water level adjusting lever corrugation pipe inside the Corrugation overflow filter (See to Figure 1). Pipe 3. Cleaning the filter frame Clean the lint around the frame Figure 1 and flush with tap water. 4. Install the filter frame. Hook (1).Install the corrugation pipe. (2).Insert the mounting plate at the bottom of the f
Краткое содержание страницы № 17
Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena The reason Is there power failure? The machine does not act.
Краткое содержание страницы № 18
Packing list User's manual 1 Pc. Water inlet hose 1 Pc. Gland 1 Pc. Twin-tub washing machine 1 Set
