Краткое содержание страницы № 1
User's manual
XQB50-20
Fuzzy Logic Automatic
Washing Machine
Contents
Before using
Names of the parts.........the 2nd cover
Safety precautions ............................1
Special function introduction ............ 3
Installation and adjustment ...............3
Install the water inlet hose.................5
Using process
Preparation before washing .............7
Put in the laundries ...........................8
Add the detergent/softener ...............9
Use the
Краткое содержание страницы № 2
Before Using Names of the parts Before Using Honorable users, Thanks for your choosing Haier products. To facilitate your operation, please read the manual carefully and operate this machine according to it. Top lid component Water absorption Detergent box cushion Water valve Cabinet handle Control panal Location for liquid bleacher Hanging hole Power line for the drain Location for lint filter hose Blance ring Filter cover Pulsator Inner tub Drain hose Control panel film Cabinet Base
Краткое содержание страницы № 3
Before Using Before Using Safety precautions Please plug the plug on special 220V~240 AC In normal usage of the washing machine, the power receptacle.Be sure to use three phase power plug shall be ready to be pulled or plugged with hang. receptacle. Ensurethe earthing prong of the power Be sure to pull the plug off and close the water faucet receptacle is earth-ed reliably. Use a leakage when occurring power failure, delivering the machine, protector if possible. setting the machine i
Краткое содержание страницы № 4
Before Using Before Using Safety precautions Do not put hand into the rotating tub. It is dangerous Do not decompose, repair or alter the machine by yourself. even if the rotation speed is slow. Take special care of the children. Keep children away from the washing machine to avoid them climbing on. Do not put any hot or heavy items (such as the kettle Do not wash laundries with volatile materials with hot water ) on the washing machine. (such as thinner, petrol etc.) The
Краткое содержание страницы № 5
Special function introduction Before Using Before Using Eliminating foam rinse Press the RINSE button, when the tube is on, it indicates that you have chosen the ELIMINATING FOAM RINSE PROGRAM, and perform eliminating foam rinse firstly. Then, it will fill water continuously after the water level is high, and the foam in the tub will overflow from the overflow inlet, and avoiding polluting the clothes again. Memory programme After switching on the Power, select the memory programme(the tub
Краткое содержание страницы № 6
Before Using Before Using How to change the direction of the drain hose 1 Loosen the fastening screws of the back cover,unpack 3 Stretch out the drain hose to the right of the frame the back cover gently, avoiding to break the clip claw. from the groove. Fasten it in the base frame with the drain hose support, and fasten the screws.Then hang Figure 1 the hook in the drain hose, and hang the drain hose in the hole of the cabinet. (Figure 3) Back cover ( Figure 3 ) 2 Take the drain hose from
Краткое содержание страницы № 7
Before Using Before Using Install the water inlet hose Confirm the water faucet Water faucet, suitable Water faucet, not suitable Outlet end surface >10mm It is required that the front end shall be longer than 10cm. The outlet end surface of the faucet shall be flat and smooth. If not please file it to avoid leakage. Connection between the water inlet hose jointer and the water faucet 1.Press the lower end of the lock lever and push down the slider. Take off the water inlet hose jointer fr
Краткое содержание страницы № 8
Before Using Before Using Connection between the water inlet hose and the washing machine 1.Do not take off the water absorption Nut of the water inlet hose cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2.Put the nut of the water inlet hose on the valve jointer. Water absorption cushion 3.Fasten the nut. Swing it gently to Jointer of the water inlet valve confirm if it's suitable.
Краткое содержание страницы № 9
Using process Using process 1 Preparation before washing Preparation before washing 1. Connect the water inlet hose. 2. Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose. Pay attention to followings before washing the laundries Confirm if there's Clear the pocket. Fasten the buttons The quantity of the When the pulsator is special requ
Краткое содержание страницы № 10
Using process Using process 2 Put in the laundries The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition (as per the laundries stipulated in the A2 Attachment of GB4288-1992 standard) that can be washed or spun in one time. One time washing quantity shall be lower than the rated capacity. The largest capacity of this machine is 5.0kg. The thicknesses, size, type of the cloth will influence the actual washing capacity
Краткое содержание страницы № 11
Using process Using process 3 Usage of the detergent Softner dispenser Add the detergent and softener into the box directly as indicated in the left figure. After adding, please close the detergent box. See to following table for the dosage of the Location for concentrated powder detergent. Detergent box How to use the washing powder Direct dissolved in the machine 1.Fill water to "Low" water level. Control panal 2.Add the power. Run for 30 seconds to dissolve it completely. 3.Put in the l
Краткое содержание страницы № 12
Minute Minute Minute Times 9 7 5 3 1 10 8 6 4 2 SPIN 4 Use the operation buttons Using process Using process Description of the function of the buttons A Indicator light of procedure Mode and meaning of the indicator light During the transmitting, the digital tube of SOAK is off, the digital tube of WASH displays "--",the digital tube of Flashing: indicate the running program RINSE displays "2",and the digital tube of SPIN displays On: indicate the program about to run, or indicate the selecte
Краткое содержание страницы № 13
Using process Using process ON/OFF button Indicator light of RESERVE and TIME REMAINED During the transmitting, it displays "--" Press the ON/OFF button to switch on the power During the process of reserve, it displays reserve time(hours) After the power is on,another press will switch off the power. When the program starts, it displays time remained(minutes).When the total After the power is on, if not press the START/PAUSE button, time exceeds 99 minutes, if "A " represents 100 minutes, "b "
Краткое содержание страницы № 14
Краткое содержание страницы № 15
Using process Using process After switching on the power, the machine will set to wash-rinse-spin program automatically. That is the most common program. To select other program, Push SOAK, WASH, RINSE and SPINbutton to select one or more programs among soak/wash/rinse/spin. After switching on the power button, if one of the WASH, RINSE, SPIN button is pushed firstly, then the digital lamps will go out automatically, and the process procedure is stopped . For example, if the Spin button
Краткое содержание страницы № 16
SURPLUS(MIN) RESERVE (HOURS LATER) Using process Using process Total time: including the normal water inlet time and drain time. * The total washing time may be influenced by the water inlet pressure and water level. * Spin time: the time from intermittent running to finishing * When selecting SOAK program, first soak for 10-40 minutes, then do wash, * rinse, spin. When selecting QUICK WASH program, wash, rinse and spin are set automatically. * * RESERVATION 5 Push the RESERVATION button to
Краткое содержание страницы № 17
Using process Using process 7 Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise, it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Clean the detergent box and set it on the control panel The lint filter must be used during washing. seat. It must be cleaned in time after each using The method of dismantle:Push it up aslant and gently. Lint filter: The meth
Краткое содержание страницы № 18
Trouble-shooting Answer to question (If there's a breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena Reason How to settle The top lid is not closed Close the top lid The digital tube displays "E0” The draining do
Краткое содержание страницы № 19
Packing list Name Quantity Storage position Inside the document bag User's manual One Inside the document bag Warranty card One Inside the document bag Lint filter One Components of the Inside the accessory bag One water inlet hose Between the upper cushion of the Bottom plate washing machine package and the One upper seal of the package carton Tapping screws Five Inside the accessory bag Fuzzy logic automatic washing One machine 17
Краткое содержание страницы № 20
Specification Specification Model XQB50-20 Rated voltage frequency 220V-240V/ 50Hz Rated washing / spinning capacity 5 .0kg (weight of standard dry cloth) 1/15L 2/18L 3/23L 4/26L 5/28L Water level/Water quantity (about) 6/31L 7/33L 8/35L 9/38L 10/42L About 126L(Highest water level; STANDARD program) Max water consumption Injection pressure
