Краткое содержание страницы № 1
Atomic Projection Alarm
Model: 616-146A | Instruction Manual
Introduction
The Atomic Projection Alarm features radio-controlled time, indoor temperature, and moon phase on a
simple, and easy to read display. Time and/or indoor temperature can be projected on a wall or ceiling.
Use the integrated USB charging port to charge your will charge your smart phone, camera or other
device when the Projection Alarm is plugged into a power outlet.
Краткое содержание страницы № 2
TABLE OF CONTENTS: Introduction 1 Atomic Projection Alarm 1 Features 3 Initial Setup
Краткое содержание страницы № 3
Features Projects time & indoor temp. on wall or ceiling Projection rotates in 90 degree increments Projection options: (1) Default: toggle between time and indoor temp., (2) time only, or (3) indoor temperature only Time zones: Atlantic Time (AST), Eastern Time (EST), Central Time (CST), Mountain Time (MST), Pacific Time (PST), Alaskan Time (AKT) & Hawaiian Time (HAT) Light up display backlight with a press of a button using battery power OR continuous light with AC adapter (ON
Краткое содержание страницы № 4
Batteries: 1. Remove battery cover: Slide tab to the up and pull out to remove battery cover. 2. Install two fresh AAA batteries according to the polarity markings. Do Not Mix Old and New Batteries Do Not Mix Alkaline, Lithium, Standard, or Rechargeable Batteries If the Atomic Projection Alarm does not display indoor temperature after 60 seconds, remove adapter and batteries, and wait for at least 60 seconds before repeating the setup process. IMPORTANT: When operating on a/c pow
Краткое содержание страницы № 5
Note: In case the atomic Projection Alarm is not able to detect the WWVB-signal (disturbances, transmitting distance, etc.), the time and date can be manually set (see “program menu”). Function Buttons SNOOZE/LIGHT/HI/LOW/OFF (TOP) Button Press and Release Functions Hold 3 seconds SET/°F/°C Move through program menu Enter program menu, Set time, (setup) date, etc. (setup) Select temperature in °F/°C ALARM Once: V
Краткое содержание страницы № 6
Time Zone This station offers seven time zones listed in letter format (default is EST): AST Atlantic Time EST Eastern Time CST Central Time TIME MST Mountain Time ZONE EST PST Pacific Time AKT Alaskan Time HAT Hawaiian Time 1. EST will flash. 2. Press and release the +/PROJ ON/OFF or -/TIME SEARCH buttons to select a different Time Zone. 3. Confirm with the SET/°F/°C button and move to Daylight Saving Indicator. Daylight Saving Indicator: DST will default to the
Краткое содержание страницы № 7
Fahrenheit/Celsius: 1. Press and release the SET/°C/°F button once to switch from Fahrenheit to Celsius. Alarm Set: Hold the ALARM button for 5 seconds to enter the alarm time set mode. 1. The alarm hour digit will flash. 2. Press and release the +/PROJ ON/OFF or -/TIME SEARCH buttons to select the hour. 3. Press and release the SET/°F/°C button to set the minutes. The minute digits will flash. 4. Press and release the +/PROJ ON/OFF or -/TIME SEARCH buttons to select the minut
Краткое содержание страницы № 8
o Time and Indoor Temperature: alternate every 5 seconds (default) o Time: Hold and release PROJECTION button Note: Both Time and Indoor Temperature will not show at the same time Projection Arm Rotation: The projection arm can be rotated 180 degrees to view the projection on the wall or ceiling. Backlight Intensity Press and release the SNOOZE/LIGHT button to adjust the brightness of the backlight: A/C Power The backlight is displayed constantly unless turned off. ON H
Краткое содержание страницы № 9
Full Moon occurs when the earth, moon, and sun are in approximate alignment, with the moon and the sun on opposite sides of the earth. The illuminated portion of the moon faces the earth, giving us complete visibility of one side of the entire moon. After a full moon the illuminated portion will decrease or wane until the new moon occurs. First Quarter and Last Quarter moons occur when the moon is at a 90 degree angle to the earth and sun. So we see half of the moon illuminated and half
Краткое содержание страницы № 10
Accuracy INDOOR TEMPERATURE: Operating temperature range = 32 F to 122 F (0C to 50C) Accuracy ± 2 degrees Fahrenheit 32 F to 122 F (0C to 50C) Resolution = 0.1 degree F Warranty Information La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the origin
Краткое содержание страницы № 11
For warranty work, technical support, or information contact: La Crosse Technology, Ltd 2817 Losey Blvd. S. La Crosse, WI 54601 The complete instruction manual is available at: www.lacrossetechnology.com/616-146a Contact Support: 1-608-782-1610 Product Registration: www.lacrossetechnology.com/support/register Protected under U.S. Patents: 5,978,738 6,076,04
