Краткое содержание страницы № 1
OWNERS
MANUAL
Model No.
502493
552493
Includes Deck
Adapter #62468
CHIP-N-VAC
CAUTION:
Safety
Read Rules for
Assembly
Safe Operation
Operating
and Instructions
Maintenance
Carefully
Repair Parts
PRINTED IN U.S.A. FORM NO 40772 (06/29/07)
Краткое содержание страницы № 2
TABLE OF CONTENTS SAFETY RULES .......................................................3,4 SERVICE AND ADJUSTMENTS ...............................19 FULL SIZE HARDWARE CHART ...........................5,13 STORAGE .................................................................19 CARTON CONTENTS .................................................6 TROUBLESHOOTING ...............................................20 ASSEMBLY ..................................................................7 REPAIR P
Краткое содержание страницы № 3
SAFETY Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times, when using power equipment. • R e a d a n d f o l l o w a l l i n s t r u c t i o n s i n t h i s m a n u a l b e f o r e a t t e m p t i n g • If the cutting mechanism str ik es a f oreign object, or if y our to assemble or operate this equipment. Failure to comply Mow-N-Vac should start to vibrate ab
Краткое содержание страницы № 4
WARNING TO AVOID SERIOUS INJURY • Read Owner's Man ual and all saf ety labels on mac hine bef ore star ting and using mac hine . • Do Not remo ve top co ver or attempt to empty contents of car t while engine is running. • Do Not stand behind car t in e xhaust disc har g e area while engine is running. • K eep hands, f eet, face , long hair and c lothing out of c hipper inlet, v ac inlet, and disc har g e area. There are R O T A TING BLADES inside these openings. •
Краткое содержание страницы № 5
HARDWARE PACKAGE CONTENTS SHOWN FULL SIZE A B C D E F G H I O N L K M J V U Q P W T R S EE NOT SHOWN FULL SIZE FF DD Z Y BB X AA CC GG See pa g e 13 f or the Dec k Adapter har d ware pac ka g e . (Contents not inc luded here .) Ref. Qty. Description Ref. Qty. Description Cart Vac Cart Vac A 3 -- Hex Bolt, 3/8" x 3" S 10 9 Nylock Nut, 5/16" T -- 1 Nylock Nut, 1/2" B -- 1 Hex Bolt, 1/2" x 1-1/4" C 2 -- Hex Bolt, 3/8" x 1-1/4" U 5 -- Nylock Nut, 3/8" V 1 -- Hair Cotter Pin, 1/8"
Краткое содержание страницы № 6
1 3 4 2 7 6 5 8 9 10 CARTON CONTENTS (Cart Body Carton) Ref. Qty. Description Ref. Qty. Description 1 1 Wheel Support 6 1 Hose 2 1 Rear Tongue 7 1 Tailgate Reinforcement Bracket 3 1 Front Tongue 8 1 Axle 4 1 Hose Hanger Rod Assembly 9 1 Latch Stand Bracket 5 2 Cart Body 10 2 Wheels 1 2 3 4 5 7 6 13 12 9 14 8 10 11 CARTON CONTENTS (Mow-N-Vac Carton) Ref. Qty. Description Ref. Qty. Description 1 1 Front Panel 8 1 Poly Hard Top 2 2 Side Panels 9 1 Hitch Br
Краткое содержание страницы № 7
ASSEMBLY This unit is shipped WITHOUT GASOLINE or OIL. After 3. Fit the tailgate reinforcement bracket over the end of assembly, see separate engine manual for proper fuel the cart bed. Position the two door support brackets and engine oil recommendations. on the bottom of the reinforcement bracket as shown in figure 2. F asten the reinf orcement br ac k et and the TOOLS REQUIRED FOR ASSEMBLY door supports to the bottom of the cart using four (1) Screwdriver 5/16" x 3/4" truss head
Краткое содержание страницы № 8
7. Assemble the wheel support to the bottom of the cart 10. Position the rear tongue on the wheel support and the using eight 5/16" x 3/4" truss head bolts and 5/16" latch stand bracket. Assemble the axle through the n yloc k n uts as sho wn in figure 4. Heads of bolts go on wheel support and the tongue. See figure 6. the inside of cart. Tighten. IMPORTANT: Make sure the tongue is securely locked to the latch stand bracket by the latch lock lever. 5/16" x 3/4" TRUSS HEAD BOLT AXLE TONGUE
Краткое содержание страницы № 9
13. Flip the cart over so that it rests on its wheels. ASSEMBLING VAC PARTS 14. Assemble the front tongue on top of the rear tongue 17. Release the latch lock lever and tilt the cart bed back. using three 3/8" x 3" hex bolts and 3/8" nylock nuts. See figure 10. See figure 8. HINT: For easier assembly, support the rear tongue with 18. Assemble the front panel to the cart bed, sliding a block of wood. the bottom lip of the panel in between the cart bed and the latch stand bracket. Fasten th
Краткое содержание страницы № 10
20. Place a side panel on top of the car t bed flange , 23. Assemble a door latch at each end of the cross brace inside the lip of the front panel. Fasten the side panel using a 5/16" x 3/4" hex bolt, a nylon washer and a to the front panel using three 1/4" x 5/8" hex bolts 5/16" nylock nut. Place the nylon washer between the and 1/4" nylock nuts. Fasten the side panel to the cart door latch and cross brace. Tighten so that latch is bed flange using tw o 1/4" x 5/8" he x bolts , 1/4" fla
Краткое содержание страницы № 11
25. Assemble a short tarp strap to rear door using one 29. Remove the hex bolts and nylock nuts from the two 1/4" x 1-1/4" he x bolt, tw o 1/4" flat w ashers and one holes in the impeller housing sho wn in figure 17. 1/4" nylock nut. Assemble an "S" hook through loose Assemble the hose hanger bracket to the impeller end of str ap . See figure 15. Repeat on other side of housing using the bolts and nylock nuts which you door. removed. 26. Assemble door to rear of cart by resting botto
Краткое содержание страницы № 12
33. Assemb le the hose adapter (nozzle) to the front of HINT: Tip the cart bed back for easier access in the next the impeller housing and secure with the three knobs. paragraph. Make sure that the switch actuator bracket contacts 37. Attach the chipper chute assembly to the weld bolts the s witch on the housing. See figure 19. on the back side of the impeller housing using three 5/16" flat w ashers and 5/16" Nyloc k n uts . Tighten. See figure 21. HOSE ADAPTER 38. Insert the tamper
Краткое содержание страницы № 13
ASSEMBLING THE DECK AD APTER (#62468) TO THE MOWER DECK Contents of Har d ware P ac k f or Dec k Adapter: CAUTION: Mo w er deflector m ust be See Figure 23. replaced when Mow-N-Vac deck adapter is removed. Do Not operate mower Key Qty. Description unless adapter or deflector is in place and properly mounted. A 2 Hex Bolt, 5/16" x 1" B 4 Hex Bolt, 1/4" x 3/4" C 2 Carriage Bolt, 5/16" x 3/4" 2. Identify your mower deck (see fold outs) and cut D 3 Nylock Nut, 5/16"
Краткое содержание страницы № 14
MOWER DECK DECK ADAPTER MOWER DECK 4. Position the adapter over the deck opening, and check 6. Assemble the adapter bracket to the deck using two f or fit of cutout as sho wn in figure 25. T r im cutout, if 5/16" x 1" he x bolts , 5/16" flat w ashers and 5/16" necessar y , to allo w tilting of adapter , k eeping the fit as n yloc k n uts . See figure 27. close as possible for best vacuum suction. NOTE: It ma y be necessar y to use e xtr a 5/16" flat washers to shim under the bracket
Краткое содержание страницы № 15
FOR 1990 AND NEWER MURRAY FOR 1990 AND NEWER MURRAY TRACTORS WITH A 38" OR 40" DECK TRACTORS WITH A 46" DECK 1. Cut out two templates and place on deck adapter as 1. Tape 46" template onto deck adapter. Mark and then sho wn in figure 29. T ape smaller one on top and larger cut out adapter . one on the side and bottom. After they are in place, carefully mark around the templates, then cut out 2. Fasten the angle bracket and the mounting bracket to adapter to obtain correct opening.
Краткое содержание страницы № 16
OPERATION HOW TO USE YOUR CHIP-N-VAC BEFORE STARTING 1. Your Chip-N-Vac engine is shipped without oil or CAUTION: Vehicle braking and stability gasoline. Service the Chip-N-Vac engine with oil and may be affected with the addition of an gas as instructed in the separate engine manual. accessory or an attachment. Be aware of 2. Inspect the Chip-N-Vac to make sure all covers (rear changing conditions on slopes. door, vinyl boot, elbow, hose adapter, hose and deck 1. Inspect the Chip-N-Vac t
Краткое содержание страницы № 17
USING THE CHIPPER CHUTE 1. Material such as stalks or heavy branches up to 3" in diameter may be fed into the chipper chute as shown in figure 32. 2. Be sure to wear eye protection and gloves when feeding material into the chipper chute. 3. Use the tamper plug, not your hands, to force material down through the chipper chute. 4. For best performance, it is important to keep the chipper blades sharp. If the composition of the material being discharged changes (becomes stringy, etc.) or
Краткое содержание страницы № 18
MAINTENANCE CUSTOMER RESPONSIBILITIES • Read and f ollo w the maintenance schedule and the maintenance procedures listed in this section. MAINTENANCE SCHEDULE Fill in dates as you Service Dates complete regular service. Check for loose fasteners X Check soft vinyl boot X Check tire pressure X Check engine oil level X Lubricate X Clean X X Maintain engine per instructions below and in engine manual. BEFORE EACH USE WARNING: Always stop engine and disconnect spark plug wi
Краткое содержание страницы № 19
SERVICE AND ADJUSTMENTS SHARPENING OR REPLACING CHIPPER BLADES NYLOCK NUTS 1. Disconnect the spark plug wire and move wire away from the spark plug. 2. Remove the access plate by removing two hex lock ACCESS n uts . See figure 33. PLATE 3. Locate one of the chipper blades in the access plate opening by rotating the impeller assembly by hand. Remove the blade using a 3/16" allen wrench on the outside of the blade and a 1/2" wrench on the impel- ler assembly, inside the housing. 4. Remove
Краткое содержание страницы № 20
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE(S) CORRECTIVE ACTION Engine fails to start 1. Spark plug wire disconnected. 1. Connect wire to spark plug. 2. Saf ety s witch not contacted. 2. Correctly install hose adapter nozzle . 3. Fuel tank empty, or stale fuel. 3. Fill tank with clean, fresh fuel. 4. Fuel shut-off valve closed 4. Open fuel shut-off valve. (if so equipped). 5. Faulty spark plug. 5. Clean, adjust gap or replace. Loss of power; 1. Spark plug wire loos
