Краткое содержание страницы № 1
English Español
For Your Records and
Warranty Assistance
T T Type 3 Models ype 3 Models ype 3 Models
For reference, also attach your receipt or a copy
of your receipt to the manual.
Owner’s Guide and Installation Manual
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 45040-01
20081219
©2008 Hunter Fan Co.
Краткое содержание страницы № 2
Welcome Your new Hunter ceiling fan is an addition to your home or office that ® will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan. We are proud of our work. We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world. Before installing your fan, for your records and warranty assistance, record information from the carton and Hunter namepl
Краткое содержание страницы № 3
Installer’s Choice and Optional Accessories Understanding Mounting and Installer’s Choice® Support Brace Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard or Angled mounting. The steps in this manual include instructions for Ceiling Standard both Installer’s Choice mounting methods. Outlet Box Mounting Style Considering Optional Ac
Краткое содержание страницы № 4
1 • Getting Ready To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64” bit • Standard screwdriver (magne
Краткое содержание страницы № 5
2 • Installing the Hanger Bracket 2-1. Drill two pilot holes into the wood support structure through the outermost holes in the outlet box. The pilot holes should be 9/64” Isolator in diameter. Hanger Note: Your fan comes with four pre-installed neoprene noise Bracket isolators. 2-2. Thread the lead wires from the outlet box down through the hole in the middle of the hanger bracket. 2-3. Align the slotted holes in the hanger bracket with the pilot holes you drilled in the wood support s
Краткое содержание страницы № 6
3 • Assembling and Hanging the Fan 3-1. Unbundle the wires from the fan and remove the paper caution Steps 3-1 – 3-3 tag. Do not discard the tag until your installation is complete. Downrod 3-2. To assemble fan to hang down from a flat or angled ceiling, insert the downrod through the canopy, adapter cover grommet, adapter cover, and canopy trim ring. (The adapter cover and Canopy adapter cover grommet may already be attached to make one piece.) Feed the wires from the fan through the do
Краткое содержание страницы № 7
4 •Wiring the Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Wall switches are not included. Select an acceptable general-use switch in accordance with national and local electrical codes. 4-1. Before attempting installation, make sure the power is still off. 4-2. To connect the wires, hold the bare metal leads together and place a wire connector over them, then twist clockwise u
Краткое содержание страницы № 8
5 • Installing the Canopy and Canopy Trim Ring Steps 5-1 – 5-2 Hanger Bracket 5-1. Partially install two canopy screws (about 2 full turns) in the hanger bracket. 5-2. Raise the canopy over the hanger bracket. Align partially installed screws with key slots in canopy. 5-3. Twist canopy clockwise to secure. 5-4. Install third & fourth canopy screw in round hole on canopy. Securely tighten all four screws. Canopy Trim Ring Canopy 5-5. Using both hands, push the canopy trim ring up to the t
Краткое содержание страницы № 9
6 • Assembling the Blades 6-1. Attach each blade to a blade iron using four blade assembly screws. Step 6-1 Blade Assembly Screws Blade Blade Iron 9 45040-01 • 12/19/08 • Hunter Fan Company
Краткое содержание страницы № 10
7 • Completing Your Installation With a Bowl Light Fixture Your Hunter fan comes with an integrated light fixture assembly. WARNING: Use only the light fixture supplied with this fan model. 7-1. Install included 100 Watt Halogen bulb. 7-2. Position the indentations in the outer rim of the glass shade so that they line up with the tabs on the inside surface of the light fixture rim. 7-3. Carefully lift the glass shade up inside the light fixture as far as it will go. 7-4. Rotate the shade
Краткое содержание страницы № 11
8 • Assembling the Remote Control and Mounting the Cradle 8-1. To install the battery, remove the back cover of the remote. Insert the included 12-volt alkaline battery (Type 23A, MN-21 or equivalent) inside the remote, matching polarity on the battery as indicated by the + and - symbols in the battery compartment. Replace the cover. If you are using more than one remote controlled fan in the same area and want to control them separately, you must change the DIP switch settings in the re
Краткое содержание страницы № 12
8 • Assembling the Remote Control and Mounting the Cradle (Continued) Setting the DIP switches You will only have to change the dipswitch settings in the remote if you are using more than one remote controlled fan in the same area and want to control them separately. You may want to label your remotes to ensure you do not mix them up. 1. At the circuit breaker or fuse box, turn the power off for the fan you want to change. Do not turn the power off at the circuit breaker for the previously in
Краткое содержание страницы № 13
9 • Operating and Cleaning Your Ceiling Fan 9-1. To start the fan, press the speed button on the remote at the level Light you desire: 3 for high, 2 for medium, 1 for low. To turn off the fan, Fan press the off button on the remote. Medium 9-2. To turn the light on or off independently from the fan, press the appropriate light button once for gradual off or twice for instant off. With the Auto Resume feature, the light will come on at the level you used last. You can also hold the lig
Краткое содержание страницы № 14
10 • Troubleshooting Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the wiring the fan section. 3. Remove the shipping bumpers. Problem: Noisy operation. 1. Tighten the blade assembly screws until snug. 2. Check to see if the blade is cracked. If so, replace all the blades. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to
