Краткое содержание страницы № 1
Operator’s Manual
Models
5021 R (531309638) 6210530X37NA
5021 E (531309639) 6210540X37NA
Read and keep this book for future reference.
This book contains important information on
Safety, Assembly, Operation, and Maintenance.
Product Imformation
The owner must be certain that all the product information
is included with the unit. This information includes the
INSTRUCTION BOOKS, REPLACEMENT PARTS, and
WARRANTIES. This information must be included to make
sure state laws and other laws are follo
Краткое содержание страницы № 2
INTRODUCTION Congratulations on your purchase. This Snowthrower has been designed, engineered and manufactured to give you the best possible dependability and performance. However, like all mechanical products, your machine will occasionally require adjust- ment and maintenance. This handbook should be read before operating or performing and adjustments on your machine. The instructions in this Owner’s Manual are written for a person with some mechanical ability. Like most service books, not all
Краткое содержание страницы № 3
RULES FOR SAFE OPERATION Operating Symbols and their meanings This manual contains safety information to make you aware of the hazards and risks These symbols are used on your equipment and defined in associated with snow throwers, and how to avoid them. your operating manual. It is important that you review and The snow thrower is designed and intended for removal understand the meanings. Failure to understand the of snow, and should not be used for any other purpose. It symbols might result in
Краткое содержание страницы № 4
RULES FOR SAFE OPERATION WARNING: This machine is capable of amputating hands and feet and throwing objects. Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe per- sonal injury or death to you, or bystanders, or damage to property or equipment. The triangle in text signifies important cautions or warnings which must be followed. Safe Operation Practices for Snowthrowers As Recommended By: American National Standards Inst
Краткое содержание страницы № 5
RULES FOR SAFE OPERATION 12.Never operate the machine at high transport speeds on Service, Maintenance And Storage slippery surfaces. Look behind and use care when operat- 1. Check shear bolts and other bolts at frequent intervals for ing in reverse. proper tightness to be sure the equipment is in safe work- 13.Disengage power to the collector/impeller when snow- ing condition. thrower is transported or not in use. 2. Never store the machine with fuel in the tank inside a 14.Use only attachments
Краткое содержание страницы № 6
TABLE OF CONTENTS INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 RULES FOR SAFE OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 HAZARD SYMBOLS AND THE MEANINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 OPERATING SYMBOLS AND THEIR MEANINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SAFE OPERATING PRACTICES . . . .
Краткое содержание страницы № 7
SAFETY DECALS The safety decals below are on your unit. If any of This unit has been designed and manufactured these decals are lost or damaged, replace them at to provide you with the safety and reliability you once. See your local dealer for replacements. These would expect from an industry leader in outdoor labels are easily applied and will act as a constant power equipment. visual reminder to you, and others who may use the equipment, to follow the safety instructions necessary Al
Краткое содержание страницы № 8
SAFETY DECALS Decals REF NO PART NO. DESCRIPTION 1 ----- * DECAL, EPA, MASS 2 761793MA DECAL, ELECTRIC START, COVER UP (Used on Model 6210530x37NA 5021R Only) 2 48X5638MA DECAL, ELECTRIC START (Used on Model 6210540x37NA 5021E Only) 3 1741524MA DECAL, DASH PANEL (Used on Model 6210530x37NA 5021R Only) 3 1741525MA DECAL, DASH PANEL (Used on Model 6210540x37NA 5021E Only) 4 1740048MA DECAL, HUSQVARNA 5 1740372MA DECAL, HUSQVARNA 5021R (Used on Model 6210530x37NA 5021R Only) 5 1740366MA DECAL, HUSQ
Краткое содержание страницы № 9
OWNER’S INFORMATION WARRANTY STATEMENT SECTION 1: LIMITED WARRANTY Husqvarna Forest & Garden Company (“Husqvarna”) warrants Husqvarna product to the original purchaser to be free from defects in material and workmanship from the date of purchase for the “Warranty Period” of the product as set forth below: Lifetime Warranty (Parts and Labor): All tiller tines and trimmer shafts against breakage. Proof of purchase required. Lifetime Warranty (“PARTS ONLY” after initial warranty expiration): Igniti
Краткое содержание страницы № 10
OWNER’S INFORMATION WARRANTY STATEMENT SECTION 3: ITEMS NOT COVERED BY THIS WARRANTY The following items are not covered by this warranty: 1. Normal customer maintenance items which become worn through normal regular use, including, but not limited to, belts, blades, blade adapters, bulbs, clutches, clutch drums, filters, guide bars, lubricants, rewind springs, saw chain, spark plugs, starter ropes and tines. 2. Natural discoloration of material due to ultraviolet light. 3. Engine and drive syst
Краткое содержание страницы № 11
ASSEMBLY Read and follow the assembly and adjustment 4. Cut down all four corners of the carton and lay the side panels flat. instructions for your snowthrower. All fasten- ers are in the parts bag. Do not discard any parts or material until the unit is assembled. 5. Cut off the plastic bag that covers the snowthrower. 6. Hold onto the lower handle and pull the snowthrower WARNING: Before doing any assembly off the carton. or maintenance to the snowthrower, remove the wire fr
Краткое содержание страницы № 12
ASSEMBLY ADD OIL TO THE ENGINE ADD FUEL TO THE ENGINE This engine is certified to operate on gasoline or petrol. The emissions control system for this engine is NOTE: Engine may already contain some EM (Engine Modifications). residual oil. Check frequently when filling the crankcase. DO NOT overfill. WARNING: Alcohol blended fuels (called The snow thrower was shipped with a container gasohol or those using ethanol or methanol) of 5W30 motor oil. This oil must be added to the can attract mo
Краткое содержание страницы № 13
ASSEMBLY BEFORE YOU OPERATE KNOW YOUR SNOWTHROWER Before you operate your new snow thrower, please review the following checklist: As you learn how to properly use the snow thrower, pay extra attention to the following 13 1741506
Краткое содержание страницы № 14
OPERATION 4 1 2 12 6 10 7 3 8 5 9 11 Figure 3 Ignition Key (6) - If equipped, insert and turn to the Control and Equipment Features (Figure 3) ON position to start the engine. Crank Assembly (1) - Changes the direction of Primer Button (7) - Injects fuel directly into the the discharge chute. carburetor for fast starts in cold weather. Chute Deflector (2) - Changes the distance the Engine Start Button (8) - On electric start models, snow is thrown. used to start the engine. Discharge Chute (3
Краткое содержание страницы № 15
OPERATION HOW TO CONTROL DISCHARGE WARNING: The operation of any snow OF SNOW thrower can result in foreign objects being thrown into the eyes, which can result WARNING: Never direct the dis- in severe eye damage. Always wear safety charge of snow toward bystanders. glasses or eye shields while operating the snow thrower. We recommend standard safety glasses or use a wide vision safety WARNING: Always stop the engine mask over your glasses. before unclogging the discharge chute or the auger
Краткое содержание страницы № 16
OPERATION BEFORE STARTING THE ENGINE HOW TO START A COLD ENGINE 1. Before you service or start the engine, 1. Fill the fuel tank with fresh, clean fuel. See “Add familiarize yourself with the snow thrower. Be Fuel To The Engine” in the Assembly section. sure you understand the function and location of all controls. 2. Move the choke control to FULL position. 2. Make sure that all fasteners are tight. 3. (Figure 3) Make sure the auger drive lever (4) is
Краткое содержание страницы № 17
OPERATION 1. With the engine running, quickly pull the re- 13. (Electric Start) First disconnect the power coil starter handle (10) three or four times with cord from the three-hole receptacle. Then, a continuous full arm stroke. This will produce a disconnect the power cord from the switch loud clattering sound that is not harmful to the box (9). engine or starter. NOTE: In temperatures below 0° F, allow the 2. Stop the engine. Wipe all sn
Краткое содержание страницы № 18
OPERATION Dry and Average Snow 3. For complete snow removal, slightly overlap leach previous path. 1. Snow up to eight inches deep can be removed rapidly and easily by walking at a moderate 4. When possible, discharge the snow down wind. rate. For snow drifts of a greater depth, slow your pace to allow the discharge chute to dis- 5. The distance the snow will be discharged can pose of the snow as rapidly as the auger receives be adjusted by m
Краткое содержание страницы № 19
MAINTENANCE CUSTOMER RESPONSIBILITIES SERVICE RECORDS Fill in dates as you Before First Every Every Every complete regular Each 2 5 10 25 Each Before service. Use Hours Hours Hours Hours Season Storage SERVICE DATES Check And Tighten All Screws and Nuts √ √ Check Spark Plug √ √ Check Drive Belt √ Check Fuel √ Drain Fuel √ Lubricate Chute Control Flange √ Check Adjustment of Auger Control Cable √ Auger Drive Belt √ NOTE: Use the following maintenance section ENGINE POWER RATING INFORMATION to kee
Краткое содержание страницы № 20
MAINTENANCE AFTER EACH USE LUBRICATION BEFORE STORAGE (Figure 5) Lubricate the chute control flange (7). Apply a clinging type of grease such as Lubriplate. 3 6 HOW TO REMOVE THE TOP COVER 2 (Figure 5) 4 5 1 7 Figure 5 20 1741506
