Краткое содержание страницы № 1
®
Model No. IMBE53991
Serial No.
USER’S MANUAL
Write the serial number in the space
above for reference.
Serial Number Decal (under seat)
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or find that there
are missing or damaged parts,
we will guarantee you complete
satisfaction through direct assis-
tance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
Краткое содержание страницы № 2
Table of Contents Important Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Part Identification Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Assem
Краткое содержание страницы № 3
Important Precautions WARNING: To reduce the risk of serious injury, read the following important precautions before using the weight bench. 1. Read all instructions in this manual before 11. Keep hands and feet away from moving using the weight bench. Use the weight parts. bench only as described in this manual. 12. Always set both safety spotters at the same 2. It is the responsibility of the owner to ensure height. that all users of the weight bench are ade- quately informed of all precauti
Краткое содержание страницы № 4
Before You Begin ® Thank you for selecting the versatile IMAGE 4.8 toll-free at 1-800-999-3756, Monday through Friday, 6 ® weight bench. The IMAGE 4.8 is designed to help you a.m. until 6 p.m. Mountain Time (excluding holidays). develop every major muscle group of the body. To help us assist you, please note the product model Whether your goal is a shapely figure, dramatic mus- number and serial number before calling. The model cle size and strength, or a healthier cardiovascular number is IMBE5
Краткое содержание страницы № 5
R1200A Part Identification Chart—Model No. IMBE53991 M6 x 55mm Bolt (4)—4 M6 x 38mm Bolt (60)—1 M6 x 16mm Screw (3)—4 M6 Washer (30)—5 M10 Washer (6)—14 M8 Nylon Locknut (54)—11 M8 Washer (52)—10 M10 Nylon Locknut (11)—28 M8 x 70mm Bolt (41)—4 M10 x 25mm Button Head Bolt (43)—2 M8 x 65mm Carriage Bolt (59)—4 M10 x 65mm Carriage Bolt (40)—8 M8 x 60mm Bolt (39)—2 M10 x 65mm Bolt (42)—4 M8 x 30mm Bolt (38)—2 M10 x 70mm Bolt (46)—10 M10 x 25mm Bolt (53)—2 M10 x 80mm Bolt (56)—1 M8 x 20mm Bolt (
Краткое содержание страницы № 6
Assembly Before beginning assembly, carefully read the • For help identifying small parts, use the PART following information and instructions: IDENTIFICATION CHART on page 5. Note: Some small parts may be pre-assembled. Make Things Easier for Yourself! In addition to the included allen wrench , This manual is designed to ensure that the assembly requires the following tools (not weight bench can be assembled successfully included): by anyone. By setting aside plenty of time, and by deciding
Краткое содержание страницы № 7
3. Slide a Brace (2) onto the bracket on one of the 3 Uprights (1). Attach the Brace to the Upright with two M10 x 65mm Bolts (42), four M10 Washers (6), and two M10 Nylon Locknuts (11). Do not tighten the Nylon Locknuts yet. 1 Slide the Upright (1) and the Brace (2) onto the M10 x 65mm Carriage Bolts (40) and the M8 x 65mm Carriage Bolts (59) in the left Base (7). Attach the 11 Upright with two M10 Nylon Locknuts (11). Attach the 6 Brace with two M8 Washers (52) and two M8 Nylon Locknuts (54).
Краткое содержание страницы № 8
5. Press a 25mm Round Inner Cap (51) into the end of 5 a Weight Storage Tube (21). 2 While a second person holds the Middle Crossbar (8) in the position shown, insert two M10 x 70mm Bolts 8 (46) through the bracket on the Weight Storage Tube (21), the left Brace (2), and the bracket on the Middle 21 Crossbar. Thread an M10 Nylon Locknut (11) onto 46 each Bolt. Do not tighten the Nylon Locknuts yet. 11 46 51 6. Press a 25mm Round Inner Cap (51) into the end of 6 51 46 the other Weight Storage Tub
Краткое содержание страницы № 9
8. Press a 25mm Bushing (48) into each end of the 8 Locking Bar (34). Insert the Barbell (35) through the Locking Bar (34) until the Barbell is centered in the Locking Bar. 48 34 35 48 9. Identify the Left Weight Glider (32) by looking at the 9 position of the round tube. Press a 38mm Bushing (29) into each end of the round tube on the Left Weight Glider (32). 32 29 Slide the Left Weight Glider (32) onto the left end of 35 50 the Barbell (35). Secure the Weight Glider to the Barbell with a hand
Краткое содержание страницы № 10
12. Place the Right Safety Spotter (23) on the right Base 12 (7) and center it over the indicated hole. Note: The 18 handle must point toward the center of the bench. Have a second person hold the Locking Bar (34) so that the Right Weight Glider (31) rests on top of the 1 Right Safety Spotter (23). Insert a Weight Guide (18) 31 into the Right Weight Glider, the Right Safety Spotter, and the hole in the Base (7). Note: Tilt the Weight Guide away from the Upright (1) as you insert it. 7 Attach the
Краткое содержание страницы № 11
15. Press a 50mm Square Outer Cap (17) onto each end 15 of the Small Stabilizer (25). Attach the Small Stabilizer (25) to the Front Leg (19) with two M10 x 65mm Carriage Bolts (40) and two 19 M10 Nylon Locknuts (11). Note: There is an inden- tation around the holes on one side of the Small 17 11 Stabilizer. This side must be facing the floor. 25 17 40 16. Press a 50mm x 70mm Outer Cap (10) onto each 16 end of the Large Stabilizer (26). 11 Turn the Large Stabilizer (26) so the warning decal is 5
Краткое содержание страницы № 12
19. Lubricate an M10 x 115mm Bolt (55). Slide an M10 19 27 Washer (6) onto the Bolt. Lubricate Attach the Backrest Adjustment Bracket (36) to the 55 bracket on the Bench Frame (5) by guiding the M10 x 36 115mm Bolt (55) through the indicated side of the Backrest Adjustment Bracket (36), the bracket on the 6 Bench Frame, and the 15mm x 10.5mm x 56mm 57 11 Spacer (57). Next, slide the Bolt through the other 6 side of the bracket on the Bench Frame, and the other side of the Backrest Adjustment Br
Краткое содержание страницы № 13
23. Place the Seat Support Tube (37) on the Bench 23 37 Frame (5) so that the Seat Adjustment Bracket (45) fits over the welded pin (not visible in the drawing) on Lubricate the side of the Bench Frame. 45 Lubricate an M10 x 80mm Bolt (56). Attach the Seat 56 Support Tube (37) to the indicated bracket on the Bench Frame (5) with the Bolt and an M10 Nylon Locknut (11). Note: Do not over tighten the Nylon Welded Locknut; the Seat Support Tube must pivot easily. Pin 5 11 24. Turn the Seat (14) as
Краткое содержание страницы № 14
Adjusting the Weight Bench This section explains how the weight bench is adjusted. See the included exercise guide for important informa- tion about how to perform a variety of exercises and how to get the greatest benefit from your exercise program. Inspect and tighten all parts each time you use the weight bench. Replace any worn parts immediately. The weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents. USING THE LOCKING BAR AND SAFETY SPOTTE
Краткое содержание страницы № 15
ADJUSTING THE BACKREST 15 To raise the Backrest (15), grip the end of the Backrest with one hand and pull it upward. The Backrest Handle Adjustment Frame (36) will automatically lock into one of the tabs on the bracket on the Bench Frame (5). 36 To lower the Backrest (15), grip the end of the Backrest with one hand and pull it slightly upwards. Grip the handle 5 (not shown) on the right side of the Backrest Adjustment Frame (36) with your other hand and pull the Backrest Adjustment Frame free of
Краткое содержание страницы № 16
R1200A Part List—Model No. IMBE53991 Key No. Qty. Description Key No. Qty. Description 1 2 Upright 35 1 Barbell 2 2 Brace 36 1 Backrest Adjustment Bracket 3 4 M6 x 16mm Screw 37 1 Seat Support Tube 4 4 M6 x 55mm Bolt 38 2 M8 x 30mm Bolt 5 1 Bench Frame 39 2 M8 x 60mm Bolt 6 14 M10 Washer 40 8 M10 x 65mm Carriage Bolt 7 2 Base 41 4 M8 x 70mm Bolt 8 1 Middle Crossbar 42 4 M10 x 65mm Bolt 9 1 Top Crossbar 43 2 M10 x 25mm Button Head Bolt 10 2 50mm x 70mm
Краткое содержание страницы № 17
R1200A Exploded Drawing—Model No. IMBE53991 52 38 38 46 16 52 16 11 15 28 22 14 1 18 9 46 22 51 6 46 11 1 27 11 30 21 46 42 4 2 11 13 6 28 56 6 6 11 63 6 8 30 11 28 37 4 36 21 6 11 42 46 6 11 55 45 28 6 58 11 2 30 3 54 54 54 60 11 11 3 54 57 6 12 11 52 52 51 16 5 41 54 11 20 46 10 11 19 18 17 26 47 11 49 43 49 39 11 7 50 44 32 50 59 52 40 52 10 25 33 29 17 17 31 54 17 40 17 48 29 49 49 64 11 11 40 34 29 35 65 12 7 49 49 24 23 54 53 53 49 52 33 49 41 59 61 62 52 17 44 43
Краткое содержание страницы № 18
Ordering Replacement Parts To order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be pre- pared to give the following information when calling: • The MODEL NUMBER of the product (IMBE53991) ® • The NAME of the product (IMAGE 4.8 weight bench) • The SERIAL NUMBER of the product (see the front cover of this manual) • The KEY NUMBER and DESCR
