Краткое содержание страницы № 1
Dual Alarm Clock
®
with SmartSet
Auto Time Setting System
(U.S. Patent No. 6,567,344)
OWNER’S MANUAL
AC100
Visit our web site at www.emersonradio.com
AC100_072806.p65 16 28/7/2006, 10:32
Краткое содержание страницы № 2
CAUTION TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! The lightning flash with arrow- The exclamation point within WARNING: TO REDUCE THE head symbol, within an equi- an equilateral triangle is in- RISK OF ELECTRIC SHOCK lateral triangle is inten
Краткое содержание страницы № 3
IMPORTANT NOTES • Avoid installing this unit in places • Operate controls and switches as exposed to direct sunlight or close to described in the manual. heat radiating appliances such as • Before turning on the power, make electric heaters, on top of other stereo certain that the power cord is properly equipment that radiates too much installed. heat, places lacking ventilation or dusty • When moving the set, be sure to first areas, places subject to constant disconnect the AC power cord. vibra
Краткое содержание страницы № 4
PREPARATION FOR USE UNPACKING AND SET UP • Remove the unit from the carton and remove all packing material from the unit. We suggest that you save the packing material, if possible, in the unlikely event that your unit ever needs to be returned for service. The original carton and packing material is the only safe way to pack your unit to protect it from damage in transit. • Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any labels or stickers fro
Краткое содержание страницы № 5
Alarm 2 Alarm 1 Alarm Mode LOCATION OF CONTROL AND INDICATORS 5 4 AM 3 6 ALM 1 ALM 2 2 7 LOW BATT. MON TUE WED THU FRI SAT SUN 8 1 9 12 13 16 14 15 17 11 18 SNOOZE 10 19 20 1.) LOW BATT. Indicator. 11.) AC Power Cord. 12.) Month/Date Setting Button. 2.) ALM (Alarm) 1 ‘ On’ Indicator. 13.) Time Setting Button. 3.) Dimmer Selector Switch. 14.) Time Zone Button. (High/Low) 15.) Alarm Mode Button. 4.) AM Indicator. (Weekdays/Weekends/Everyday Alarm). 5.) Time/Date Display. 16.) Alarm 1 Se
Краткое содержание страницы № 6
OPERATING INSTRUCTIONS SETTING THE TIME, THE FIRST TIME ® IMPORTANT: The first time you connect your new SmartSet alarm clock to the AC outlet the internal computer will automatically set the time correctly for the Eastern Time Zone, which is the initial default setting. The display will scan for a few seconds and then show the correct Day and Time in the Eastern zone. If you live in the Eastern Time zone, there’ s nothing else to do. Your clock is set correctly and running. If you do not live i
Краткое содержание страницы № 7
DATE DISPLAY To see the correct date at any time, depress the Month/Date button. The display changes from time to month and date (MM/DD). st For example, May 21 will appear as “5 21”. When you release the Month/Date button the display returns to the correct time. YEAR DISPLAY To see the correct year, depress the Time and Month/Date buttons together. The display changes from time to year. When you release the Time and Month/Date buttons the display returns to the correct time. DAYLIGHT SAVING AND
Краткое содержание страницы № 8
MANUAL TIME ADJUSTMENTS Some people like to set their clocks 5 to 10 minutes fast to make sure that they will ® always be on time. Even though the SmartSet sets the time by itself, you still have the option of adjusting the time manually if you wish. To manually adjust the time display depress and hold the Time button, and press either the Up or Down buttons to adjust the time display ahead or back as desired. Each press of the Up or Down buttons will change the display by one minute. If you hol
Краткое содержание страницы № 9
SELECTING THE ALARM MODE ® Your SmartSet alarm clock allows you to select from among three different alarm operation modes for either alarm. The alarm modes are: • Weekdays only – the alarm will only turn on Monday through Friday; • Weekends only – the alarm will only turn on Saturday and Sunday; • Everyday – the alarm will turn on all 7 days. To check the Alarm Mode setting for Alarm 1, depress the Alarm 1 setting button. The display will show the Alarm 1 wake up time and the day of the week
Краткое содержание страницы № 10
WAKE TO BUZZER NOTE: Alarm 1 and Alarm 2 have different buzzer sounds. •Alarm 1 is a “Single beep” sound. •Alarm 2 is a “Double beep” sound. You will be able to tell which alarm is going off by the sound that it makes. 1.) Reconfirm the wake up time and alarm mode settings for the alarm you are using, Alarm 1, Alarm 2, or both alarms. 2.) Set the Alarm selector switch for 1, 2 or Dual position. The appropriate ALM 1 and/or ALM 2 indicators will light up to confirm that the alarms are set. 3.)
Краткое содержание страницы № 11
CHANGING THE LITHIUM BATTERY Like all batteries, eventually the built in lithium battery will need to be replaced. A number of factors, such as, the length of time between the date the clock was manufactured and the date you plugged it in for the first time determine the amount of time before replacement. During this initial storage period, the lithium battery is ® supplying power to the SmartSet computer memory. Once you plug the clock in, your household outlet supplies the power, and the batte
Краткое содержание страницы № 12
RESETTING THE CLOCK AFTER A TOTAL MEMORY LOSS If you do not change the built in lithium battery within a reasonable period of time after you see the ‘ flashing’ LOW BATT. warning indicator, the lithium battery may become exhausted and will no longer be able to supply back up power to the ® SmartSet internal computer. If the unit is disconnected from the AC outlet after ® the battery is exhausted, or if a power interruption occurs, the SmartSet memory will be lost and the clock will need to be re
Краткое содержание страницы № 13
5.) Depress the Time button and the Up or Down buttons to set the display to the correct time. Be sure to confirm that you have set the time correctly to ‘ AM’ or ‘ PM’ by observing the AM indicator. 6.) After you set the time, reconfirm that the Day, and Month/Date displays are still correct. Make final adjustments if necessary. ® The SmartSet clock memory is now reset and the new lithium battery will maintain it for the next 5 to 8 years, depending on the number and duration of the power outag
Краткое содержание страницы № 14
CARE AND MAINTENANCE If the cabinet becomes dusty, wipe it with a soft cloth. If the cabinet becomes smudged or dirty, clean it with a soft, slightly dampened cloth. Never allow water or any liquid to get inside the cabinet. Never use any abrasive cleaners or cleaning pads as these will damage the finish of your radio. LITHIUM BATTERY PRECAUTIONS • Dispose of the old battery properly. Do not leave it lying around where a young child or pet could play with, or swallow it. If the battery is swal
Краткое содержание страницы № 15
LIMITED WARRANTY Emerson Radio Corp. warrants manufacturing defects in original material, including original parts and workmanship, under normal use and conditions, for a period of ninety (90) days from the date of original purchase in the U.S. With your dated proof of purchase, we will provide repair service at no charge for labor and parts at an authorized Depot Repair Facility, or replace the product in our discretion. For repair or replacement, pack your unit in a padded box, enclose your
Краткое содержание страницы № 16
EMERSON Part No. 16-2878 Printed in China 607-05 AC100_072806.p65 15 28/7/2006, 10:32
