Руководство по эксплуатации North Star M1146E

Краткое содержание страницы № 1

M1146E



4-Way Wedge Systems

1146, 1147, 1148
®


Purpose: Parts for building own 4-way log splitter.

4-Way Wedge System Assembly
1. Unbox and identify all parts.











Parts List
Item Part Number Description Qty
1 82140 Cotter Pin 2
2 778321 Wedge 1
3 778329 Right Wing 1
4 778330 Left Wing 1
781151 4” Cylinder for 1146 1
5
781152 4.5” Cylinder for 1147 1
781153 5” Cylinder for 1148 1
6 778380 Left Keeper 1
7 778433 Anchor Block 1
8 778592 Pin, C

Краткое содержание страницы № 2

2. Requirements: 6” x 25 lb x 66.25” I-beam 3. Kit will be assembled as shown below. 4. Weld the anchor block onto the I-beam. Anchor block must be centered on beam and completely welded. 5. Install cylinder onto anchor block with the supplied pin and cotter pins. 6. Log stripper weldment can be welded to the beam or bolted to a 10-gauge (0.1345” thick) plate, which is welded to the beam. If welded to the beam, a 10-gauge spacer must be placed between the log stripp

Краткое содержание страницы № 3

7. Install the wedge on the beam by inserting eight, hex head bolts, 82114, through the wedge and the right keeper, as shown below. Tighten with 82115 (7/16” Nyloc nuts) to 70 ft-lbs. Repeat for the left side. 8. Hook up hydraulics and extend the cylinder out. Connect the cylinder to the wedge using 82258 (7/16 x 2 ¼” SHCS bolt) and 82115 (7/16” Nyloc nut). 9. If 4-way splitting is desired wings can be installed as shown above. Insert five 82237 (1/2” nyloc nut) nuts into t

Краткое содержание страницы № 4

4