Руководство по эксплуатации Antec NSK 4482

Краткое содержание страницы № 1

NSK 4482 / NSK 4482B
User’s Manual

Краткое содержание страницы № 2

Table of Contents Introduction 1.1 Case Specifications………………...……………......………….....… 2 1.2 Diagram……………………………………………....…......…….....… 2 Hardware Installation Guide 2.1 Setting Up……….…......…................................….................. 3 2.2 Motherboard Installation……………………………….......….....…. 3 2.3 3.5” Device Installation…………………………….….........…........ 3 2.4 5.25” Device Installation……………….…….....…...................... 4 Connecting the Front I/O Ports 3.1 USB 2.0 Ports……………………………...……..

Краткое содержание страницы № 3

At Antec, we continually refine and improve our products to ensure the highest quality. It’s possible that your new case will differ slightly from the descriptions in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct. Disclaimer This manual is intended only as a guide for Antec’s Computer Enclosures. For more comprehensive instructions on installing the motherboard and periphe

Краткое содержание страницы № 4

1.1 Case Specifications Case Type Mid Tower Color Silver and Black / All Black 16.9” (H) x 7.9” (W) x 16.5” (D) Dimensions 430mm (H) x 200mm (W) x 420mm (D) Weight 15 lbs / 6.82 kg 1 x Rear 120mm TriCool™ 3-speed fan 1 x Front mount for optional 80mm fan Cooling 1 x Advanced Chassis Air Guide, with mount for optional 80mm fan 8 Drive Bays: - External 3 x 5.25” bays Drive Bays - External 2 x 3.5” bays - Internal 3 x 3.5” bays Motherboard Size Mini-ITX, microATX, Standard ATX 2 x USB 2.0 Front

Краткое содержание страницы № 5

Hardware Installation Guide This manual is not designed to cover CPU, RAM, or expansion card installation. Please consult the motherboard manual for specific mounting instructions and troubleshooting. Before proceeding, check the manual for your CPU cooler to find out if there are steps you must take before installing the motherboard. While installing hardware, keep your case on a flat, stable surface. 2.1 Setting Up 1. Take the case out of the box. Remove the styrofoam and plastic bag. 2. Pl

Краткое содержание страницы № 6

6. Connect the appropriate connector(s) from the power supply to the hard drive(s). 2.4 5.25” Device Installation There are three external 5.25” drive bays. 1. Looking from the rear of the case you can see metal grills covering the 5.25” drive bays. Carefully push a screwdriver through the metal grill and gently push the plastic drive bay cover outwards until it comes off. 2. Using your hands, twist the metal plate back and forth until it breaks off. Note: Don’t break off the metal

Краткое содержание страницы № 7

3.2 AC’97/HD Audio Ports There is an Intel® standard 10-pin AC’97 connector and an Intel® 10-pin HDA (High Definition Audio) connector linked to the front panel of the case. Pin Assignment for Audio Ports (HDA and AC’97) Signal Names Signal Names Pin Pin (HDA) (AC’97) 1 MIC2 L 1 MIC In 2 AGND 2 GND 3 MIC2 R 3 MIC Power 10 6 4 2 4 AVCC 4 NC 5 FRO-R 5 Line Out (R) 9 7 5 3 1 6 MIC2_JD 6 Line Out (R) 7 F_IO_SEN 7 NC 8 Key (no pin) 8 Key (no pin) 9 FRO-L 9 Line Out (L) 10 LINE2_JD 10 Line Out (

Краткое содержание страницы № 8

3.4 Rewiring Motherboard Header Connectors There may come a time when you need to reconfigure the pin- out of a motherboard header connector. Examples could be for your USB header, audio input header, or some other front panel connector such as the Power Button connector. Before performing any work, please refer to your motherboard manual or your motherboard manufacturer’s website to be sure of the pin-out needed for your connector. And we strongly recommend making a notated drawing be

Краткое содержание страницы № 9

Specifications: Size: 120 x 120 x 25.4mm Rated Voltage: DC 12V Operating Voltage: 10.2V ~13.8V Speed Input Input Air Flow Static Pressure Noise (RPM) Current Power High 0.24A 2.24 m³ / min 2.54mm-H O 2 30 dBA 2.9 W 2000 (max.) (79 CFM) (0.10inch-H O) 2 Medium 1.59 m³ / min 1.53mm-H O 2 0.2A 28 dBA 2.4 W 1600 (56 CFM) (0.06inch-H O) 2 Low 1.1 m³ / min 0.92mm-H O 2 0.13A 25 dBA 1.6 W 1200 (39 CFM) (0.04inch-H O) 2 4.2 Front 80mm Intake Fan An optional 80mm fan can be i

Краткое содержание страницы № 10

Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 USA tel: 510-770-1200 fax: 510-770-1288 Antec Europe B.V. Stuttgartstraat 12 3047 AS Rotterdam The Netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 Customer Support: US & Canada 1-800-22ANTEC customersupport@antec.com Europe +31 (0) 10 462-2060 europe.techsupport@antec.com www.antec.com © Copyright 2009 Antec, Inc. All rights reserved. All trademarks are the property of their respective owners. Reproduction in whole or in part withou