Краткое содержание страницы № 1
application notes
hp OpenView
storage management appliance
software
event code definitions
Product Version: 2.0
First Edition (December 2002)
Part Number: AA-RTDKA-TE
This document describes the event codes used in notification messages generated by the HP OpenView Storage
Management Appliance software V2.0.
Additional information and other HP OpenView documentation are available at:
http://h18000.www1.hp.com/products/sanworks/managementappliance.
Краткое содержание страницы № 2
© Hewlett-Packard Company, 2002. All rights reserved. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information, which is protected b
Краткое содержание страницы № 3
Application Notes Contents Application Notes Contents These Application Notes provide listings of the various event codes displayed by the HP OpenView Storage Management Appliance. The event codes are defined and discussed in the following sections: ■ Introduction, page 4 ■ Storage Management Appliance Event Codes, page 5 ■ Storage Management Appliance Audit Codes, page 6 ■ NetApp Filers Event Codes, page 9 ■ HP StorageWorks and McData Switch Event Codes, page 11 ■ HP StorageWorks SAN and Broc
Краткое содержание страницы № 4
Introduction Introduction The Storage Management Appliance can generate notification messages to any number of users in response to events. A notification message, including the source of the event, date, time, event code, and event description, can be sent to a standard e-mail address or to an e-mail pager address. This document provides a complete list of the events logged by the Storage Management Appliance. The lists of events are presented in tables with one table for each application
Краткое содержание страницы № 5
Storage Management Appliance Event Codes Storage Management Appliance Event Codes The Storage Management Appliance’s core services—discovery, event notification, and automation—generate the events listed below. The system records these events in the Storage Management Appliance Event Log. Table 2: Storage Management Appliance Event Codes Event Event ID Code Severity Description 202 880A00CA 2 Discovery %1 started. 203 880A00CB 2 Discovery %1 completed. 204 880A00CC 2 New device found: %1. 2
Краткое содержание страницы № 6
Storage Management Appliance Audit Codes Storage Management Appliance Audit Codes The Storage Management Appliance generates audits in response to most user-initiated operations. Activities such as creating or running a discovery generate audits that are recorded in the Storage Management Appliance Audit Log. Table 3: Storage Management Appliance Audit Codes Event ID Event Code Severity Description 100 8C0A0064 2 Installation of %1 on appliance %2. 101 8C0A0065 2 Removal of %1 from appliance
Краткое содержание страницы № 7
Storage Management Appliance Audit Codes Table 3: Storage Management Appliance Audit Codes (Continued) Event ID Event Code Severity Description 407 8C0A0197 2 Deletion of notification settings from user %1 and transferred to user %2. 500 8C0A01F4 2 Starting backup to network share %1. 501 8C0A01F5 2 Completion of backup operation that was started to network share %1. See %2 file on Management Appliance %3 for details. 502 8C0A01F6 2 Cancellation of backup operation that was started to networ
Краткое содержание страницы № 8
Storage Management Appliance Audit Codes Table 3: Storage Management Appliance Audit Codes (Continued) Event ID Event Code Severity Description 1002 8C0A03EA 2 Changing Management Appliance membership to domain %1. 1003 8C0A03EB 2 Shutdown of Management Appliance. 1004 8C0A03EC 2 Changing domain/workgroup membership. 1005 8C0A03ED 2 Restarting Management Appliance. 1006 8C0A03EE 2 Scheduling Management Appliance for %1. 1010 8C0A03F2 2 Configuration of Management Appliance as the first domain
Краткое содержание страницы № 9
NetApp Filers Event Codes NetApp Filers Event Codes The following events are generated by NetApp Filer devices and are recorded in the Storage Management Appliance Event Log. A number of these events are associated with user-defined traps and most indicate a condition that is likely to have a negative impact on operations. A small number of events mark a return to normal operation after some period of abnormal operation. The Storage Management Appliance supports the NetApp MIB version 1.2.
Краткое содержание страницы № 10
NetApp Filers Event Codes Table 4: NetApp Filer Event Codes (Continued) Event Event ID Code Severity Description 124 880E007C 5 The NVRAM battery is fully discharged. 125 880E007D 4 The charge in the NVRAM battery is low. 126 880E007E 5 A node in a Cluster FailOver configuration failed. Its partner will assume service for the failed node. 127 880E007F 5 The partner has taken over for a failed cluster node. 128 880E0080 2 A cluster node has resumed operation. 129 880E0081 5 At least one volum
Краткое содержание страницы № 11
HP StorageWorks and McData Switch Event Codes HP StorageWorks and McData Switch Event Codes The following events are generated by HP StorageWorks switches and McData switches and are recorded in the Storage Management Appliance Event Log. Many of these event types have several possible states and each state has an appropriate severity code. The Storage Management Appliance supports the following StorageWorks and McData MIB versions: ■ V1.9 for the ED-5000 series ■ V1.10 for the EF-6000 seri
Краткое содержание страницы № 12
HP StorageWorks and McData Switch Event Codes Table 5: HP StorageWorks and McData Event Codes (Continued) Event Event ID Code Possible States Severity Description 108 880C006C N/A 2 Device WWN: %1 currently attached to Port %2 has either successfully connected or is currently being rejected due to a Port Binding violation.%n An ef6000PortBindingViolation(3) is generated whenever the switch detects that a port binding violation occurs. 109 880C006D N/A 2 Threshold Alert.%n ef6000PortIndex:
Краткое содержание страницы № 13
HP StorageWorks SAN and Brocade Switch Event Codes HP StorageWorks SAN and Brocade Switch Event Codes The following events are generated by HP StorageWorks SAN switches and Brocade switches and are recorded in the Storage Management Appliance Event Log. Many of these event types have several possible states and each state has an appropriate severity code. The Storage Management Appliance supports the StorageWorks SAN and Brocade MIB version 4.0. Table 6: StorageWorks SAN and Brocade Switch
Краткое содержание страницы № 14
HP StorageWorks SAN and Brocade Switch Event Codes Table 6: StorageWorks SAN and Brocade Switch Event Codes (Continued) Event Event ID Code Possible States Severity Description 109 8802006D informational 2 Fabric Watch has generated an event.%n normal 2 Threshold %3 in Class/Area %1 at index faulty 7 %2 has generated event %7 with %5 on %6.%n This event is %8%n SSN: %9%n GroupName: %10%n GroupType: %11%n GroupMemPosition: %12%n Trap sent by Fabric Watch to notify of an event. 111 8802006F
Краткое содержание страницы № 15
HSG Element Manager Event Codes HSG Element Manager Event Codes The HSG Element Manager is an application provided with the Storage Management Appliance and used to configure and monitor HSG80/60 storage elements. The HSG Element Manager generates events that help a user understand the status of both the manager application and the storage elements. The system records these events in the Storage Management Appliance Event Log. Table 7: HSG Element Manager Event Codes Event ID Event Code Se
Краткое содержание страницы № 16
HSG Element Manager Event Codes Table 7: HSG Element Manager Event Codes (Continued) Event ID Event Code Severity Description 6036 88011794 3 Device not found. %1 6037 88011795 3 %1 not found 6038 88011796 3 Storage Set not found 6039 88011797 3 Host Connection not found 6040 88011798 4 Test Unit Ready failed 6041 88011799 2 Virtual Disk %1 deleted 6042 8801179A 2 Virtual Disk %1 created 6043 8801179B 2 Device %1 added 6044 8801179C 2 Device %1 deleted 6045 8801179D 3 Host Connection %1 went of
Краткое содержание страницы № 17
HSG Element Manager Event Codes Table 7: HSG Element Manager Event Codes (Continued) Event ID Event Code Severity Description 6077 880117BD 2 Power supply is now good. %1 6078 880117BE 6 Fan has gone bad. %1 6079 880117BF 2 Fan is now good. %1 6080 880117C0 6 High Temperature detected. %1 6081 880117C1 2 Temperature is within optimal range. %1 6082 880117C2 6 Airflow is bad. %1 6083 880117C3 2 Airflow is now good. %1 6084 880117C4 2 EMU is present 6085 880117C5 6 EMU is no longer presen
Краткое содержание страницы № 18
HSG Element Manager Event Codes Table 7: HSG Element Manager Event Codes (Continued) Event ID Event Code Severity Description 6118 880117E6 2 Item is already used 6119 880117E7 2 Device %1 added to Spare Set 6120 880117E8 2 Device %1 removed from Spare Set 6121 880117E9 2 Device removed from Failed Set 6122 880117EA 4 Attempt to expand Virtual Disk failed. %1 6123 880117EB 2 Virtual Disk expanded 6124 880117EC 2 %1 Virtual Disk not expandable 6125 880117ED 4 Incomplete Concatset modify: %1 6126
Краткое содержание страницы № 19
HSG Element Manager Event Codes Table 7: HSG Element Manager Event Codes (Continued) Event ID Event Code Severity Description 6159 8801180F 2 Unit is used by another configuration 6160 88011810 2 Unit is a Snapshot source 6161 88011811 2 Subsystem firmware does not support snapshots 6162 88011812 2 Subsystem does not have peer to peer support enabled 6163 88011813 2 HSGSubsystem Miscellaneous info 6164 88011814 2 Mirror cache is not enabled 6165 88011815 2 Controller cache size is too small 61
Краткое содержание страницы № 20
HSG Element Manager Event Codes Table 7: HSG Element Manager Event Codes (Continued) Event ID Event Code Severity Description 7007 88011B5F 4 Invalid SHOW DEV FULL output 7008 88011B60 4 HSGSubsystem API has received Invalid show connection output. %1 7009 88011B61 3 HSGSubsystem API received modification request but no changes were found. %1 7010 88011B62 3 HSGSubsystem API received delete request but no changes were found. %1 7011 88011B63 3 HSGSubsystem API invalid CLI syntax or incomplet
