Руководство по эксплуатации Airlink101 AEN-U35SAB

Краткое содержание страницы № 1

Ver. 1A


Quick Installation Guide

3.5” USB2.0 SATA Enclosure

Model # AEN-U35SAB

Package Contents:
• 3.5” SATA Enclosure with
Stand
• Power adapter
• USB 2.0 Cable
• Quick Installation Guide
• Screwdriver and screw set



Section 1



Hard Drive Installation

Step 1 Use the provided screwdriver to remove the two screws on the right side
of the enclosure. Pull out the right panel.

Краткое содержание страницы № 2

Step 2 Attach the SATA connectors to your hard drive. Step 3 With the hard drive label facing up, attach the guides to both sides of the hard drive. The picture below shows how the guide being attached to the hard drive correctly. If the guides are not properly installed, the hard drive cannot be inserted into the enclosure case.

Краткое содержание страницы № 3

Step 4 Line up the guides with the case, and slide the hard drive back in. The enclosure should slide shut. Step 5 Secure the two screws that were removed in step 1. Step 6 Connect one end of the power cord to the back of the enclosure and connect the other end to a power outlet. Step 7 Connect one end of the USB cable to the enclosure and the other end to your computer. Step 8 Press the power button to turn the power ON.

Краткое содержание страницы № 4

The hard drive is now ready to use and you can find it under “My Computer”. Congratulations! The hard drive installation is complete. Note: If you do not see your hard drive under My Computer, please continue on Section 2. Section 2 Disk Management If your disk drive is brand new, you might not be able to see it under “My Computer” before it is formatted. Please go though the following steps to format the new drive. Step 1 Go to Control Panel > Administrative To

Краткое содержание страницы № 5

Step 3 Right click on the Unallocated disk and select New Partition from the menu.

Краткое содержание страницы № 6

Step 4 Click Next to start the New Partition Wizard. Step 5 Select the desired Partition Type and click Next.

Краткое содержание страницы № 7

Step 6 Enter the desired Partition Size and click Next. Step 7 Select Assign the following drive letter and select a letter for the new disk drive or you can select other options preferred. Click Next.

Краткое содержание страницы № 8

Step 8 Select the File system and change the Volume label or you can select other options preferred. Click Next to start formatting the hard drive. Step 9 Click Finish after the New Partition Wizard completed.

Краткое содержание страницы № 9

Go to My Computer, the new drive should be listed there. Section 3 Technical Support E-mail: support@airlink101.com Toll Free: 1-888-746-3238 Website: www.airlink101.com * Specifications are subject to change without notice. Photos of the product may not reflect the actual content. Hard disk compatibility and accessible capacity are not guaranteed. Copyright ©2010 AirLink101® All rights reserved. AirLink101, the stylized AirLink101 logo, specific produ