Краткое содержание страницы № 1
LGB2118A
LGB2124A
Gigabit Smart Switch Eco Fanless
Supports http and SNMP interface for switch
®
BLACK BOX
management.
• The LGB2118A has (16) 10-/100-/1000-Mbps TP ports
and (2) Gigabit SFP ports.
• The LGB2124A has (20) 10-/100-/1000-Mbps TP ports
and (4) Gigabit TP/SFP dual-media ports.
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
Customer
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Support
Mailing ad
Краткое содержание страницы № 2
Trademarks Used in this Manual Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Intel is a registered trademark of Intel Corporation. Microsoft and Internet Explorer are registered trademarks of Microsoft Corporation. Novell and NetWare are registered trademarks of Novell, Inc. Xerox is a registered trademark of Xerox Corporation. Any other trademarks mentioned in this manual are acknowledged to be the property of the tradema
Краткое содержание страницы № 3
FCC and IC RFI Statements Federal Communications Commission and Industry Canada Radio Frequency Interference Statements This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause inter ference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 o
Краткое содержание страницы № 4
NOM Statement Instrucciones de Seguridad (Normas Oficiales Mexicanas Electrical Safety Statement) 1. T odas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. L as instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas. 4. T odas las instrucciones de operación y uso deben ser seguidas. 5. E l aparato
Краткое содержание страницы № 5
Table of Contents Table of Contents 1. Specifications .........................................................................................................................................................................7 1.1 General ..........................................................................................................................................................................7 1.2 Management Software Specifications ...............................................
Краткое содержание страницы № 6
Table of Contents 5.3.4 Ping Status .........................................................................................................................................................68 5.4 Maintenance ............................................................................................................................... .................................69 5.4.1 Warm Restart ....................................................................................................
Краткое содержание страницы № 7
Chapter 1: Specifications 1. Specifications 1.1 General Aging — Auto-aging with programmable inter-age time Auto-Negotiation — Supports auto-negotiation for configuring speed and duplex mode Blocking Prevention — Supports Head of Line (HOL) blocking prevention Buffer Memory — Embedded 512 KB frame buffer Cable Type and Maximum Length — Twisted-Pair (TP): CAT5 UTP cable, up to 328 ft. (100 m); Fiber: 1000BASE-SX: up to 721.7/902.2/1640.4/1804.5 ft. (220/275/500/550 m), depending on multimode fi
Краткое содержание страницы № 8
Chapter 1: Specifications VLAN — Supports Port-based VLAN and Tag-based (IEEE 802.1Q) VLAN Connectors — LGB2118A: (16) 10-/100-/1000-Mbps Gigabit Ethernet (TP) switching ports, (2) Gigabit SFP fiber module ports; LGB2124A: (20) 10-/100-/1000-Mbps Gigabit Ethernet (TP) switching ports, (4) Gigabit TP/SFP fiber dual media ports with auto detection function Indicators — LGB2118A: (33) LEDs: (1) System Power, (16) LINK/ACT and (16) SPD LEDs for 10/100/1000 M TP Ports 1 to 16, (2) LINK/ACT
Краткое содержание страницы № 9
Chapter 2: Overview 2. Overview 2.1 Introduction The Gigabit Smart Switch Eco Fanless is a standard switch that meets all IEEE 802.3/u/x/z Gigabit and Fast Ethernet specifications. The LGB2118A switch has (16) 10-/100-/1000-Mbps TP ports and (2) Gigabit SFP fiber transceiver slots. The LGB2124A switch has (20) 10/100/1000Mbps TP ports and (4) Gigabit dual media TP/SFP transceiver slots. Both switches support http and SNMP interfaces for switch management. The network administrator can logon
Краткое содержание страницы № 10
Chapter 2: Overview • Features per-port shaping, policing, and Broadcast Storm Control. • Saves power using two proprietary power management techniques. • Includes IEEE 802.1Q-in-Q nested VLAN support. • Uses full-duplex flow control (IEEE 802.3x) and half-duplex backpressure. • Features extensive front-panel diagnostic LEDs: For LGB2118A: System: Power, TP Port 1–16: LINK/ACT, 10-/100-/1000-Mbps, SFP Port 17 and 18: SFP (LINK/ACT); For LGB2124A: System: Power, TP Port 1–24: LINK/ACT, 10-/10
Краткое содержание страницы № 11
Chapter 2: Overview 2.4 Hardware Description 2.4.1 18-Port Gigabit Smart Switch Eco Fanless (LGB2118A) Figures 2-1 ad 2-2 show the front and back panels of the switch. Table 2-2 describes its components. Table 2-3 describes the LEDs in detail. 5 6 8 9 7 1 2 3 4 Figure 2-1. LGB2118A front panel. 10 Figure 2-2. LGB2118A back panel. Table 2-2. LGB2118A components. Number Component Description 1 (1) Mode button Switches between what is being displayed
Краткое содержание страницы № 12
Chapter 2: Overview Table 2-3. LGB2118A LED functions. LED Color Function (1) System Power LED Green Lit when power is on. Steady green Lit when connection with remote device is good. (16) LINK/ACT LEDs Blinking green Blinks when any traffic is present. Green Green when TP link is on 1000 Mbps speed. (16) SPD LEDs Yellow Yellow when TP link is on 10/100 Mbps speed. Off Off when no link is present. Green Green when SFP link is on 1000 Mbps speed. 1000SX/LX Gigabit fiber port 17, 18 Yellow Yellow
Краткое содержание страницы № 13
Chapter 2: Overview Table 2-4. LGB2124A components. Number Component Description 1 (1) Mode button Switches between what is being displayed by LEDs. 2 (24) TP port status LEDs For details, see Table 2-5. 3 (24) TP port speed LEDs For details, see Table 2-5. 4 (4) SFP port status LEDs For details, see Table 2-5. 5 Link/Act LED Lit to show switch is in Link/Act mode. 6 System LED Lit to show switch is in System mode. 7 Speed LED Lit to show switch is in Speed mode. 8 (24) 10/100/1000BASE-T RJ-45 p
Краткое содержание страницы № 14
Chapter 2: Overview Optional Modules for LGB2118A and LGB2124A On the LGB2118A switch, Ports 17–18 are SFP fiber module ports. On the LGB2124A, Ports 21–24 include two types of media— TP and SFP Fiber (with LC connectors); they support 10-/100-/1000-Mbps TP or 1000-Mbps SFP Fiber with auto-detect function. Use a 1000-Mbps SFP Fiber transceiver for high-speed connection expansion; choose from four optional SFP types listed in Table 2-6. Table 2-6. Optional modules for LGB2124A. Product Code Spe
Краткое содержание страницы № 15
Chapter 3: Installation 3. Installation 3.1 Starting Up the Switch This section will give users a quick start for: • Hardware and cable installation. M • anagement station installation. S • oftware booting and configuration. 3.1.1 Hardware and Cable Installation CAUTION: Wear a grounding device to avoid damage from electrostatic discharge. Make sure that power switch is OFF before you insert the power cord into the power source. Installing Optional SFP Fiber Transceivers to the Gigabit Smar
Краткое содержание страницы № 16
Chapter 3: Installation Connect CAT5 grade RJ-45 TP cable to a TP port of the switch and connect the other end to a network-aware device such as a workstation or a server. Repeat the above steps, as needed, to connect each RJ-45 port to a Gigabit 10/100/1000 TP device. The switch is ready to operate. Power On The switch supports a 100–240 VAC, 50–60 Hz power supply. The power supply will automatically convert the local AC power source to DC power. The switch‘s ports are hot-swappable, so you c
Краткое содержание страницы № 17
Chapter 3: Installation Table 3-1. Fiber supported by the switch. Fiber cable type Multimode Fiber Cable and Modal Bandwidth Multimode 62.5-/125-µm Multimode 50-/125-µm Modal Bandwidth Distance Modal Bandwidth Distance IEEE 802.3z Gigabit Ethernet 1000BASE-SX, 850 nm 160 MHz-km 721.7 ft. (220 m) 400 MHz-km 1640.4 ft. (500 m) 200 MHz-km 902.2 ft. (275 m) 500 MHz-km 1804.5 ft. (550 m) Single-mode fiber 9/125 m 1000BASE-LX/LHX/ZX Single-mode transceiver 1310 nm, 6.2 mi. (10 km), or 18.6 mi. (30
Краткое содержание страницы № 18
Chapter 3: Installation Typical Network Topology in Deployment A hierarchical network with minimum levels of switches may reduce the timing delay between the server and the client station. This approach will minimize the number of switches in any one path, lower the possibility of network loops, and improve network efficiency. If more than two switches are connected in the same network, select one switch as the Level 1 switch and connect all other switches to it at Level 2. We recommend conne
Краткое содержание страницы № 19
Chapter 3: Installation 3. The switch manager has to assign different names for each VLAN group at one switch. Case 2b: Port-based VLAN (See Figure 3-4). VLAN 1 VLAN 2 VLAN 3 VLAN 4 Figure 3-4. Port-based VLAN diagram. 1. VLAN1 members cannot access VLAN2, VLAN3, and VLAN4 members. 2. VLAN2 members cannot access VLAN1 and VLAN3 members, but they could access VLAN4 members. 3. VLAN3 members cannot access VLAN1, VLAN2, and VLAN4. 4. VLAN4 members cannot access VLAN1 and VLAN3 members
Краткое содержание страницы № 20
Chapter 3: Installation 3.1.3 Configuring the Management Agent of the Gigabit Smart Switch Eco Fanless Via the Web, the switch can set up the management function. Use any one of them to monitor and configure the switch. Configuring the Management Agent of the Gigabit Smart Switch Eco Fanless through the Ethernet Port There are two ways to configure and monitor the switch through the switch’s Ethernet port. They are Web browser and SNMP manager. The user interface for the SNMP manager is managem
