Краткое содержание страницы № 1
7V WIDE TOUCH SCREEN MONITOR
LZ-760R
INSTRUCTION MANUAL
© B64-3159-00/00 (EV)
Краткое содержание страницы № 2
Contents Before Use .................................................... 3 TV Control Function .................................. 14 On Screen Control Monitor Control Function ........................... 4 • Switching the Control Screen • Power Off • Selecting the Preset Band • Switching the Monitor’s Picture • Seek Mode • Volume • Selecting the Channel • Switching the TV/Video Screen Mode • Switching the Speaker Mode Control Screen • Switching the AV Output • Selecting the Preset Band
Краткое содержание страницы № 3
Before Use 2WARNING Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry soft To prevent injury and/or fire, take the following cloth such as a silicon cloth. precautions: If the faceplate is stained badly, wipe the stain off with a cloth • Ensure that the unit is securely installed. Otherwise it may fly moistened with neutral cleaner, then wipe neutral detergent out of place during collisions and other jolts. off. • When extending the ignition, battery or ground
Краткое содержание страницы № 4
Monitor Control Function V.SEL SCRN PWR MODE Power Off Volume Press the [PWR] button for at least 1 second. Increasing Volume: Power On Press the [5] button. Press the [PWR] button. Decreasing Volume: Press the [∞] button. Switching the Monitor’s Picture Press the [V.SEL] button. Switching the TV/Video Screen Mode Each time the button is pressed the monitor’s picture switches as follows: Press the [MODE] button. During the KTC-V500N, KTC-V500P or KTC- Each time the button is pressed the scre
Краткое содержание страницы № 5
Switching the Speaker Mode Switching to the Screen Control Screen Press the [MODE] button for at least 1 second. Press the [SCRN] button. Each time the button is pressed for at least 1 (☛ Page 6) second the built-in speaker mode switches as follows: Display Setting "Normal" Sound with monitor picture "TV" Sound of televion (During the KTC-V500N, KTC-V500P or KTC- V500E is connected) "NAV" Sound of navigation "Video1" Sound of video 1 "Video2"/ Sound of video 2 "R-Cam" "Off" Built-in speake
Краткое содержание страницы № 6
Screen Control Screen Enter the Screen Control Screen Auto Dimmer [Auto DIM] Select the Screen Control mode by referring to Touch Setting "Switching to the Screen Control Screen" (page 5). [7On] The [DIM] level can be adjusted. Also, when the area around the Adjusting the Picture Quality monitor is dark, the monitor brightness can be changed by Item Touch Setting the [DIM] level. BRT [ 3 ] Brighter screen [7Off ] The [DIM] items can’t be [ 2 ] Darker screen adjusted. Also, even if the
Краткое содержание страницы № 7
Monitor Control Function On Screen Control D A C B When the current setting information is displayed on the screen, touching a dotted line will enable operation of each of the following items: • If R-Cam is selected when Mirror is set to ON for AV-IN2 (mentioned in (page 9)), On-screen settings are not displayed. Switching the TV/Video Screen Mode Switching the AV Output Touch the A area. Touch the C area. When buttons are displayed, touching the A area When buttons are displ
Краткое содержание страницы № 8
Setup Function Setup Menu Screen Setting the System Setup SCRN Touch the [System Setup] button. System Setup Screen-1 is displayed. (☛ Page 9) Enter the Setup Menu Screen Setting the TV Setup Press the [SCRN] button for at least 1 second. Setup Menu Screen is displayed. Touch the [TV Setup] button. TV Setup Screen is displayed. (☛ Page 11) (During the KTC-V500P or KTC-V500E is connected) Setting the Touch Panel Adjustment Touch the [Touch Adjust] button. Touch Panel Adjust Screen is displayed.
Краткое содержание страницы № 9
< System Setup > System Setup Screen-1 Setting the NAV input [7Off ] It becomes the Off mode setting. Use this setting when Setup input and switch method of the navigation there’s nothing connected to picture. the AV-IN1 terminal. Touch Setting [7RGB] It becomes the RGB mode Setting the AV-IN2 input setting. Operate the V.SEL Setup switch method of the picture input to AV-IN button when the image from 2 terminal. the navigation unit connected to I/F terminal is shown on the Touch Set
Краткое содержание страницы № 10
System Setup Screen-1 System Setup Screen-2 Select the AV-IN2 input display Setting the AV Output [AV-OUT] Selecting the display when this device is switched Touch Setting to internal AV-IN2 terminal input source. [7Normal] Picture/sound with monitor Touch the [Video 2] or [R-Cam] button. picture. [7Video 1]/ Picture/sound from AV-IN1 Setting the Rear view camera image [Mirror]: [7NAV] terminal. (AV-IN2 setting during "R-Cam") [7Video 2]/ Picture/sound from AV-IN2 Touch Setting [7R-Cam]
Краткое содержание страницы № 11
< TV Setup > Setup Function TV Area Setting Screen Setting the TV Area Exit the TV Area Setting Screen (During the KTC-V500E is connected) Touch the [Return] button. Return to the Setup menu screen. Select the area for TV broadcast viewing. Selecting the Preset Bands: Touch the [TV 1] or [TV 2] button. • Pulling out the Connection cable to the TV tuner, settings of the TV Area will be default. Press the Reset Selecting the Reception Area: button and set the TV Area again if the Connection
Краткое содержание страницы № 12
Before Use < Touch Panel Adjustment > TV Area Setting Screen Touch Panel Adjustment Screen Setting the TV Area Adjusting the Touch Position (During the KTC-V500P is connected) The touch panel can be adjusted if the position touched and the operation performed do not Select the area for TV broadcast viewing. match. Selecting the Preset Bands: Touch the [TV 1] or [TV 2] button. 1 Accurately touch the mark at the lower left. Selecting the Reception Area: 2 Accurately touch the mark at the uppe
Краткое содержание страницы № 13
Setup Function | English 13
Краткое содержание страницы № 14
B TV efo Co re n U trs ol F e unction (During the KTC-V500N, KTC-V500P or KTC-V500E On Screen Control Control Screen A C B E D Selecting the Preset Band Touch the [Band] button. Each time the button is touched the preset band Switching the Control Screen switches between the TV1 and TV2. Touch the D area. Seek Mode Sets the seeking mode. • If you make no button operation for 10 seconds, the Touch the [Seek] button. control screen is automatically cancelled. Each time the button is touc
Краткое содержание страницы № 15
is connected) Station Preset Memory Exit the Control Screen Putting the station in the memory. Touch the [OK] button. 1 Select the band Touch the [Band] button. • If you make no button operation for 10 seconds, the control screen is automatically cancelled. 2 Select the channel to put in the memory Touch the [4] or [¢] button. 3 Put the channel in the memory Touch the [P1] — [P8] button for at least 1 seconds. On each band, 1 station can be put in the memory on each [P1] — [P8] button. Au
Краткое содержание страницы № 16
Installation Accessories A F (M4 x 8 mm) ..........1 ..........4 B G (Ø4 x 12 mm) ..........1 ..........5 C H ..........2 ..........2 D I ..........1 ..........2 E J (Ø4 x 16 mm) ..........4 ..........1 The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. | 16 English
Краткое содержание страницы № 17
Installation Procedure 1. To prevent short circuits, remove the key from the ignition and disconnect the · terminal of the battery. • If your car’s ignition does not come with an ACC position, connect the ignition wires to a power source that can be 2. Make the proper input and output cable turned on and off with the ignition key. If you connect the connections for each unit. ignition wire to a power source that receives a constant 3. Connect the wiring harness wires in the voltage suppl
Краткое содержание страницы № 18
Before Use Connection Monitor Unit Navigation Unit White Connection cable (Provided with the Kenwood Navigation Unit) White Accessory B Video Box Unit AV 1 INPUT AV 2 INPUT AV OUTPUT TO NAVIGATION VIDEO L (MONO) R VIDEO L R VIDEO L R Black Audio/Visual input 1 Audio/Visual input 2 Audio/Visual Output • Visual output (Yellow) • Visual input (Yellow) • Visual input (Yellow) • Audio left output (White) • Audio left input (White) • Audio left input (White) • Audio right output (Red) • Audio right
Краткое содержание страницы № 19
Installation Before Use Installation for Monitor Unit ■ Installation location and cleaning Select for installation a location where the stand can be placed completely horizontal or where the front edge of the support (petal-shaped part) can be B C A attached horizontally as shown in Figure A. Do not install in locations where the entire support is at a diagonal such as in Figure B or where the monitor unit is facing down such as in Figure C. • Thoroughly wipe away and dust or grease from th
Краткое содержание страницы № 20
Installation for Monitor Unit ■ Setting the Monitor Unit 1 Bend the stand support to conform to the shape of the installation location. Adjust the shape of the support so that there is 2 no rattling or gap when the stand is placed on the support. 3 Peel off the protective strip from the double- sided tape on the bottom of the stand and securely attach the stand. • Do not attach the double-sided tape more than once or touch the adhesive with your fingers as this will weaken its adhesive
