Краткое содержание страницы № 1
NEC NEC LCD LCD Se Seri rie es s
®
MultiSync
MultiSync
™
™
LCD1510+
LCD1510+
User’s Manual
User’s Manual
78134702.wpc 1 8/20/99, 10:46 AM
You can
register your
product online at
www.nectech.com/
productregistration
Краткое содержание страницы № 2
Index Warning 1 Contents 2 Quick Start 3-7 Controls 8-10 Recommended Use 11-12 Specifications 13 Features 14 Troubleshooting 15 References 16 Limited Warranty 17 TCO’99 18-19 Avertissement 21 Contenu 22 Mise en marche rapide 23-27 Commandes 28-30 Usage recommandé 31-32 Fiche technique 33 Fonctions 34 Dépannage 35 Références 36 Garantie limitée 37 TCO’99 38-39 Warnung 42 Lieferumfang 43 Quick Start 44-48 Bedienungselemente 49-51 Empfehlungen für die Verwendung 52-53 Technische Daten 54 Funktionen
Краткое содержание страницы № 3
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PL
Краткое содержание страницы № 4
Contents You can register your product online at www.nectech.com/productregistration ® Your new NEC Technologies MultiSync LCD monitor box* should contain the following: ™ • MultiSync LCD1510+ Monitor with tilt/swivel/pivot stand • Power Cord (Part # 79PM1764) • AC Adapter (#A1240T01) • Video Signal Cable • User’s Manual ® • Pivot Driver Software CD MultiSync LCD1510+ monitor with Power Cord Video Signal Cable and AC Adapter Pivot Driver Software CD (Includes User’s Manual) User’s Manual * Reme
Краткое содержание страницы № 5
Quick Start ® To attach your MultiSync LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC: Connect the 15-pin mini D-SUB of the appropriate signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws. For the Mac: Connect the MultiSync Macintosh cable adapter to the computer (Figure B.1). Attach the 15-pin mini D-SUB end of the appropriate signal cable to the MultiSync Macintosh cable adapter (Figure
Краткое содержание страницы № 6
Quick Start cont. Mac Adapter (not included) 15-pin mini D-SUB Figure A.1 Figure B.1 Clip A Power Switch Figure C.1 Figure E.1 Figure D.1 Power Cord 4 78134702.wpc 6 8/20/99, 10:46 AM
Краткое содержание страницы № 7
Quick Start cont. Cable Management To use the cable management feature, lift up then remove back cover (Figure CM.1). Place all cables into the vertical groove, leaving 6” of slack in the cables to allow the monitor to rotate between Landscape and Portrait orientation (Figure CM.2). To replace back cover, push in then slide down (Figure CM.3). Cable Cover Lift up then remove Leave sufficient back cover length of cable Push in and slide down Figure CM.2 Figure CM.3 Figure CM.1 Raise and Lower Mo
Краткое содержание страницы № 8
Quick Start cont. Screen Rotation Before rotating, the screen must be raised to the highest level to avoid knocking the screen on the desk or pinching your fingers. To raise the screen, place one hand under bottom of screen (Figure RL.1), lift up and simultaneously push the button on the bottom back of the stand. (Figure RL.2). To rotate screen, place hands on each side of the monitor screen and turn clockwise from Landscape to Portrait or counter-clockwise from Portrait to Landscape (Figure R.1
Краткое содержание страницы № 9
Quick Start cont. Tilt and Swivel Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (Figure TS.1). Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1. Disconnect all cables. Figure TS.1 2. Place one hand under bottom of screen (Figure RL.1), lift up and simultaneously push the button on the bottom back of the stand raise it to the maximum height (Figure RL.2). 3. Place monitor face down on a non-abrasive surf
Краткое содержание страницы № 10
Controls OSM™ (On-Screen Manager) control buttons on the front of the monitor function as follows: To access OSM press any of the control buttons ( , , , ) or the PROCEED or EXIT button. To rotate OSM between Landscape and Portrait modes, press the RESET button. Main Menu Sub-Menu EXIT Exits the OSM controls. Exits to the OSM main menu. CONTROL / Moves the highlighted Moves the highlighted area up/down to select area up/down to select one of the controls. one of the controls. CONT
Краткое содержание страницы № 11
Controls cont.ols AUTO Auto Adjust Automatically adjusts the Image Position, the H. Size and Fine setting. Position Controls H. POSITION Controls Horizontal Image Position within the display area of the LCD. V. POSITION Controls Vertical Image Position within the display area of the LCD. AUTO AUTO Automatically sets the Horizontal and Vertical Image Position within the display area of the LCD. Image Adjust Controls H. SIZE Adjusts the horizontal size by increasing or decreasing this setting. FIN
Краткое содержание страницы № 12
Controls cont.ols Information Indicates the current display resolution and frequency setting of the monitor. ™ EdgeLock Control: Operating your monitor at a non-standard timing may cause images to appear darker than normal or have color distortion. Use of the EdgeLock control will adjust images to their normal state. Resolution Notifier: While the display is capable of other resolutions (as with all flat panel displays), it is a fixed matrix of pixels and best used at its native resolution — 10
Краткое содержание страницы № 13
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING ® THE MULTISYNC LCD COLOR MONITOR: •DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the cabine
Краткое содержание страницы № 14
Recommended Use cont. CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 16 inches and no further away than 28 inches from your eyes. The opt
Краткое содержание страницы № 15
Specifications ® ™ Monitor MultiSync LCD1510+ Notes Specifications Monitor LCD Module Diagonal: 15 inch Active matrix; thin film transistor (TFT) Viewable Image Size: 15 inch liquid crystal display (LCD); 0.30 mm dot ® 2 Native Resolution (Pixel Count): Landscape:1024 x 768 pitch; XtraView technology; 200cd/m white Portrait: 768x1024 luminence; 200:1 contrast ratio, typical Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms Sync: Separate sync. TTL Level Horizontal sync. Positive/Negative Vertical sync
Краткое содержание страницы № 16
Features ™ NuCycle Plastic: A special silicone compound for PC resin, being extremely flame- retardant, safe and environmentally friendly. ® XtraView Wide Viewing Angle Technology: Allows the user to be able to see the monitor from any angle (160 degrees) from any orientation — Portrait or Landscape. Provides full 160 viewing angles either up, down, left or right. ® Wider Compatibility: Because the MultiSync LCD monitor is analog through and through, it does not require special analog to digita
Краткое содержание страницы № 17
Troubleshooting No picture • The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • Power Button and computer power switch should be in the ON position. • Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.) • Check the monitor and your display card with respect to compatibility and recommended
Краткое содержание страницы № 18
References • BBS (978) 742-8706 NEC Technologies’ Remote Bulletin Board System is an electronic service accessible with your system and a modem. Communication parameters are: 300/1200/2400/9600/14.4k/28.8k/33.6k bps, no parity, 8-data bits, 1 stop bit • Customer Service/ Technical Support (800) 632-4662 Fax (978) 742-7049 • Electronic Channels: Internet e-mail: tech-support@nectech.com Internet ftp site: ftp.nectech.com World Wide Web: http://www.nectech.com Product Registration: http://www.n
Краткое содержание страницы № 19
Limited Warranty NEC Technologies, Inc. (hereinafter “NECTECH”), warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace (at NECTECH’s sole option) any part of the enclosed unit which proves defective for a period of three (3) years from the date of first consumer purchase. Spare parts are warranted for ninety (90) days. Replacement parts or unit may be new or refurbished and will meet specifications of
Краткое содержание страницы № 20
TCO’99 Congratulations! You have just purchased a TCO’99 approved and labeled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method for encourag- ing the adaptation of goods and se
