Краткое содержание страницы № 1
MultiSync LCD1830
User’s Manual
Краткое содержание страницы № 2
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK • DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REF
Краткое содержание страницы № 3
Declaration Declaration of the Manufacturer We hereby certify that the colour monitor MultiSync LCD1830 (LA-18S02) and MultiSync LCD1830 (LA-18S02-BK) are in compliance with Council Directive 73/23/EEC: – EN 60950 Council Directive 89/336/EEC: – EN 55022 – EN 61000-3-2 – EN 61000-3-3 – EN 55024 (IEC 61000-4-2) (IEC 61000-4-3) (IEC 61000-4-4) (IEC 61000-4-5) (IEC 61000-4-6) (IEC 61000-4-8) (IEC 61000-4-11) and marked with NEC-Mitsubishi Electric Visual Systems, Corp. 686-1, NISHIOI OI-MACHI ASHIG
Краткое содержание страницы № 4
For the Customer to use in U.S.A. or Canada Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouiller du Canada. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CSA C22.2 #950. Ce produit porte la marque ‘C-UL’ et se conforme au
Краткое содержание страницы № 5
2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interferenc
Краткое содержание страницы № 6
Contents Your new NEC MultiSync LCD monitor box* should contain the following: • MultiSync LCD1830 monitor with tilt base • Power Cord • Video Signal Cable • User’s Manual • CD-ROM includes complete User‘s Manual in PDF format and Windows related files (Inf file and color profile). To see the complete User‘s Manual, Acrobat Reader 4.0 must be installed on your PC. * Remember to save your original box and packing material to transport or ship the monitor. English-5 English
Краткое содержание страницы № 7
Quick Start To attach the MultiSync LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC: Connect the 15-pin mini D-SUB of the appropriate signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws. For the Mac: Connect the MultiSync LCD1830 Macintosh cable adapter to the computer (Figure B.1). Attach the 15-pin mini D-SUB end of the appropriate signal cable to the MultiSync LCD1830 Macintosh cable ada
Краткое содержание страницы № 8
15-pin mini D-SUB 15-pin mini D-SUB Mac Adapter (not included) Figure A.1 Figure B.1 AC Power Cord Signal Cable Figure C.1 1. Cables pass through in this hole. 2. Connect each connector. 3. Replace connector cover with cables passing through upper opening. INPUT2 AC-IN INPUT1 Power Outlet Power Switch To Computer Figure D.1 English-7 English
Краткое содержание страницы № 9
Marking I. Cable Cover How to remove this cover. 1. Push marking area Marking area 2. Slide to up side (1. Push) 3. Remove 2 Push Push II. Connector Cover How to remove this cover. Figure E.1 1. Push under side 2. Remove English-8
Краткое содержание страницы № 10
Tilt Grasp both sides of the monitor screen with your hands and adjust the tilt as desired Figure TS.1 (Figure TS.1). Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1. Remove the connector cover, hinge cover and cable cover. (Figure R.1) 2. Disconnect all cables. Push Push 3. Place monitor face down on a non-abrasive surface. (Place the screen on a 32 mm platform so that hole of stand match to screw location) (Figure R.2). Figure R.1 4. Remove the 4 src
Краткое содержание страницы № 11
Controls OSM (On-Screen-Manager) Controls The OSM controls on the front of the monitor function as follows: To access OSM press any of the control buttons ( , , , ). To change signal input, press the INPUT 1/2 button. Control Main Menu Sub-Menu EXIT Exits the OSM controls. Exits to the OSM controls main menu. Moves the highlighted area Moves the highlighted CONTROL / up/down to select one of the area up/down to select controls. one of the controls. Moves the bar left/right to CONTROL / Moves the
Краткое содержание страницы № 12
Auto Adjust Automatically adjusts the Image Position, the H. Size and Fine setting. Position Controls LEFT/RIGHT Controls Horizontal Image Position within the display area of the LCD. UP/DOWN Controls Vertical Image Position within the display area of the LCD. AUTO ADJUST Automatically sets the Horizontal and Vertical Image Position within the display area of the LCD. Image Adjust Controls H. SIZE Adjusts the horizontal size by increasing or decreasing this setting. FINE Improves focus, clarity
Краткое содержание страницы № 13
sRGB sRGB mode dramatically improves the color fidelity in the desktop environment by a single standard RGB color space. With this color supported environment, the operator could easily and confidently communicate colors without further color management overhead in the most common situations. NATIVE Original color presented by the LCD panel that is unadjustable. Tools 1 SMOOTHING Select one of three image sharpness settings. This function is only valid when the expanded display function (expansi
Краткое содержание страницы № 14
VIDEO DETECT Selects the method of video detection when more than one computer is connected. NONE The Monitor will not search the other video input port unless the monitor is turned on. FIRST DETECT The video input has to be switched to “FIRST DETECT” mode. When current video input signal is not present, then the monitor searches for a video signal from the other video input port. If the video signal is present in the other port, then the monitor switches the video source input port to the new f
Краткое содержание страницы № 15
OSM TURN OFF The OSM control menu will stay on as long as it is use. In the OSM Turn Off submenu, you can select how long the monitor waits after the last touch of a button to shut off the OSM control menu. The preset choices are 10, 20, 30, 60 and 120 seconds. OSM LOCK OUT This control completely locks out access to all OSM control functions. When attempting to activate OSM controls while in the Lock Out mode, a screen will appear indicating the OSM controls are locked out. To activate the OSM
Краткое содержание страницы № 16
OSM Warning OSM Warning menus disappear with Exit button. NO SIGNAL: This function gives a warning when there is no signal present. After power is turned on or when there is a change of input signal or video is inactive, the No Signal window will appear. RESOLUTION NOTIFIER: This function gives a warning of use with optimized resolution. After power is turned on or when there is a change of input signal or the video signal doesn’t have proper resolution, the Resolution Notifier window will open.
Краткое содержание страницы № 17
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the cabinet
Краткое содержание страницы № 18
• Allow adequate ventilation around the monitor so that heat can properly dissipate. Do not block ventilated openings or place the monitor near a radiator or other heat sources. Do not put anything on top of monitor. Caution • The power cable connector is the primary means of detaching the system from the power supply. The monitor should be installed close to a power outlet which is easily accessible. • Handle with care when transporting. Save packaging for transporting. CORRECT PLACEMENT AND AD
Краткое содержание страницы № 19
• Avoid displaying fixed patterns on the monitor for long periods of time to avoid image persistence (after-image effects). • Get regular eye checkups. Ergonomics To realize the maximum ergonomics benefits, we recommend the following: • Adjust the Brightness until the background raster disappears • Do not position the Contrast control to its maximum setting • Use the preset Size and Position controls with standard signals • Use the preset Color Setting • Use non-interlaced signals with a vertica
Краткое содержание страницы № 20
Specifications Monitor Specifications MultiSync LCD1830 Monitor Notes LCD Module Diagonal: 51 cm/18.1 inches Active matrix; thin film Viewable Image Size: 51 cm/18.1 inches transistor (TFT) liquid crystal display (LCD); Native Resolution (Pixel Count): 1280 x 1024 0.28 mm dot pitch; 2 200cd/m white luminence, typical; 300:1 contrast ratio, typical Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms Sync: Separate sync.TTL Level Horizontal sync. Positive/Negative Vertical sync. Positive/Negative Composti