Краткое содержание страницы № 1
LL-S201A
LCD MONITOR
OPERATION MANUAL
Краткое содержание страницы № 2
IMPORTANT: To aid reporting in case of loss or theft, please record the Model No.: product’s model and serial numbers in the space provided. The numbers are located in the rear of the product. Serial No.: U.S.A. ONLY This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARN
Краткое содержание страницы № 3
IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within a triangle, is intended to alert the user to the CAUTION presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of RISK OF ELECTRIC sufficient magnitude to constitute a risk of electric SHOCK shock to persons. DO NOT OPEN The exclamation point within a triangle is intended to alert th
Краткое содержание страницы № 4
DEAR SHARP CUSTOMER Thank you for your purchase of a SHARP LCD product. To ensure safety and many years of trouble-free operation of your product, please read the Safety Precautions carefully before using this product. SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in
Краткое содержание страницы № 5
SAFETY PRECAUTIONS (Continued) 19. Usage of the monitor must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury, severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and missile launch control in a weapon system. 20. Do not touch the parts of the product or the AC adapter that become hot for long periods of time. Doing so may result in low-temperature burns. To maintain com
Краткое содержание страницы № 6
TIPS AND SAFETY INSTRUCTIONS - The TFT color LCD panel used in this monitor is made with The Power Cord and AC adapter the application of high precision technology. However, there - Use only the power cord and AC adapter supplied with the monitor. may be minute points on the screen where pixels never light - When handling the AC adapter, observe the following: or are permanently lit. Also, if the screen is viewed from Incorrect handling may result in fire, electric shock, or injury. an acut
Краткое содержание страницы № 7
Contents IMPORTANT INFORMATION ............................................3 Turning Power On/Off ....................................................13 DEAR SHARP CUSTOMER ..............................................4 Turning on the power .................................................13 SAFETY PRECAUTIONS ..................................................4 Turning off the power .................................................13 TIPS AND SAFETY INSTRUCTIONS ...............................6
Краткое содержание страницы № 8
Part Names nFront view 1. Power LED (See page 13.) 1 nRear view 42 3 14 7 8 9 10 11 5 12 6 1. Flap (See page 12.) 2. VESA holes (See page 24.) 3. Anti-theft hole ( ) Allows the monitor to be secured using a commercially available anti-theft lock. The anti-theft hole is compatible with Kensington’s MicroSaver security system. 4. Speakers 5. Power/Menu button (See page 13, page 17.) 6. Cable clamp (See page 9.) 7. Headphone jack (See page 10.) 8. HDMI input terminal (See page 9.) 9. Di
Краткое содержание страницы № 9
Binding Cables Secure the HDMI cable, DisplayPort cable, and USB cable using the cable clamp. 1. Remove the cable clamp. 2. Route the cables through the cable 3. Push the cable clamp down into place. restraint slot. Cable restraint slot Cable clamp Cable clamp Caution • When connecting cables, spread a soft cloth on a stable level surface such as a desk, and gently place the monitor on it with the screen facing down. Connecting Peripheral Equipment DisplayPort input terminal Caution • Be sure
Краткое содержание страницы № 10
Connecting Peripheral Equipment nUsing the touch panel Connecting headphones To use the touch panel, connect the monitor to a USB port on (commercially available) a PC using the supplied USB cable. Headphones (commercially available) with a stereo mini plug (φ 3.5 mm) can be connected to the monitor. φ 3.5 mm stereo mini plug of commercially available headphones Supplied USB cable To USB port on PC Headphone jack Micro-USB terminal Check the orientation of the connector and insert it horizon
Краткое содержание страницы № 11
Installation The monitor can be installed in three different ways. nMounting the monitor on the stand 1. Place the stand on a level surface. Standing position Place the monitor on the supplied stand. Caution • The stand is for use in landscape orientation. It cannot be used for portrait orientation. 2. Set the monitor on the stand. nAssembling the stand Set the monitor so that the logo in the center is aligned with 1. Insert the back into the front. the circle mark on the stand. Align the ma
Краткое содержание страницы № 12
Installation nDisassembling the stand Horizontal position 1. Remove the bottom cover. Place the monitor on a table or other level surface. Push the tabs in towards the center and pull. Caution Tabs • When using the monitor horizontally, use the horizontal tab in the upright position. 1. Lift up the two tabs on the back of the monitor. Bottom cover 2. Remove the back from the front. Depress the button on the front and slide the back across, then pull the back up. Back Button Front 2. Place t
Краткое содержание страницы № 13
Turning Power On/Off Turning on the power Turning off the power 1. Press the POWER button. 1. Turn off the PC. 2. Depress the POWER button for around 2 seconds. POWER button POWER button Press Depress for around 2 seconds The power LED turns off. Power LED The power LED turns on. Caution • If the monitor will not be used for a long time, disconnect 2. Turn on the PC. the power plug from the power outlet. The screen appears. Status Status of the monitor Green lit Signal input Orange lit No s
Краткое содержание страницы № 14
Touch Action nCommon finger and touch pen actions Touch action modes Single-tap There are three touch action modes: finger/pen mode, pen- Touch the screen with your finger/touch pen. only mode, and finger-only mode. These modes can be changed on the menu screen. The monitor is set to finger/pen mode when shipped. Finger/pen mode In this mode, the screen can be touched with your finger or with the touch pen. While the screen is being touched with the touch pen, touch pen operation is given pri
Краткое содержание страницы № 15
Touch Action Drag-and-drop nFinger actions Touch the screen with your finger/pen and move without lifting. Zoom When you have finished the movement, lift your finger/touch While touching the screen with two fingers, move them closer pen. together and farther apart. Slide to pan Pinch With your finger/touch pen touching the screen, move it up and down to scroll the screen. Stretch Press-and-tap Flicks With one finger touching the screen, tap once (single tap) with Move your finger/touch pen
Краткое содержание страницы № 16
Touch Action Other functions In Windows 8, input panel functions can be used. In Windows 7, touch pointer and input panel functions can be used. For information about the touch pointer and input panel functions, see Windows Help. Touch pointer : A translucent image of a mouse appears near the point touched. The left/right buttons of the image can be clicked to perform the same actions as left/right clicking a mouse. Input panel : A software keyboard and an input panel with handwriting recog
Краткое содержание страницы № 17
Monitor Settings 4. Touch [Exit] or press the MENU button. Menu operations The menu screen disappears. The monitor settings are configured by displaying the menu screen. The operations on this page are the basic operations. Caution • Do not turn off the power while the menu screen is displayed. Doing so may initialize the settings. • While the menu screen is displayed, touch actions are not possible other than those for the menu screen. 30 nExample of operation Exit Return Mute Operations on
Краткое содержание страницы № 18
Monitor Settings Menu functions Setup Input Select Volume Rotation Finger-only Pen-only Finger/pen mode mode mode Touch mode selection Touch mode selection These icons switch the touch action mode. Input Select A ( ) mark is displayed at the top of the icon for the selected mode. The mode can be checked with the touch mark located at the This icon manually switches the signal input source from the upper-right portion of the screen. (See pages 19, 21) PC. Touching the icon displays HDMI and Dis
Краткое содержание страницы № 19
Monitor Settings SETUP Menu Details Other Other Position nMode on Start Up Position Touch Mode When the monitor is used in portrait orientation (power/menu button on the top), this icon moves the display position of the This setting configures the touch action mode (See page 18) menu screen to the bottom of the screen. used when the monitor is turned on. [Reset] : The monitor starts in finger/pen mode. [Save] : The monitor starts in the mode that was last used. Mode Rotate Mode This settin
Краткое содержание страницы № 20
Monitor Settings Operation lock is enabled. Prohibiting operations (operation lock) A key mark is displayed on the screen and it disappears after around 5 seconds. This function makes it possible to prohibit operations to turn the power off and to prohibit touch action on the screen. If an operation is attempted when the monitor is locked, a key mark is displayed for around 5 seconds. (See page 21) TIPS • If the menu screen is displayed when locked, the invalid action mark is displayed. Cau
