Краткое содержание страницы № 1
PLASMA MONITOR
OWNER’S MANUAL
MODELS : MU-60PZ30/30M/30V
MU-60PZ30A/30MA/30VA
MU-60PZ30B/30MB/30VB
MU-60PZ30K/30MK/30VK
MU-60PZ30R/30MR/30VR
MU-60PZ30S/30MS/30VS
MU-60PZ90/90M/90V
MU-60PZ90A/90MA/90VA
MU-60PZ90B/90MB/90VB
MU-60PZ90K/90MK/90VK
MU-60PZ90R/90MR/90VR
MU-60PZ90S/90MS/90VS
Please read this owner’s manual thoroughly before operating
the Monitor.
Retain it for future reference.
Record model number and serial number of the Monitor.
See the label attached on the back of the Monitor and re
Краткое содержание страницы № 2
Warning Warning Warning WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi- cient magnitude to constitute a risk of electric shock to persons.
Краткое содержание страницы № 3
Safety Instructions Safety Instructions Safety Instructions Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in potential elec- trical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference. Observing the simple preca
Краткое содержание страницы № 4
Safety Instructions Safety Instructions continued Safety Instructions continued 14. Outdoor Antenna Grounding 19. Servicing If an outside antenna or cable system is connected to the Do not attempt to service this product yourself as opening or product, be sure the antenna or cable system is grounded so removing covers may expose you to dangerous voltage or as to provide some protection against voltage surges and other hazards. Refer all servicing to qualified service per- built-up static charges
Краткое содержание страницы № 5
Contents Contents Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Screen Menu Options Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3~4 Auto Adjustment . . . . . . . . . . . . . . . . . . . . . . . .20 Setting Picture Format . . . . . . . . . . . . . . . . . . .20 Introduction Picture Size Zoom . . . . . . . . . . . . . . . . . . . . . .20 Controls and Connection Options . . . . . . . . . . . .7 Split Zoom . . . . . . .
Краткое содержание страницы № 6
Introduction Introduction Introduction What is a Plasma Display Panel (PDP)? If voltage is applied to gas within glass panels, ultraviolet rays are produced and fused with a fluorescent substance. At that instant, light is emitted. A Plasma Display is a next generation flat Display using this phenomenon. 160° - Wide angle range of vision Your flat panel plasma screen offers an exceptionally broad viewing angle -- over 160 degrees. This means that the display is clear and visible to viewers who
Краткое содержание страницы № 7
INPUT VOLUME SELECT Introduction Controls Controls Front Panel Controls Front Panel Controls - This is a simplified representation of a typical front panel. The Front Panel Controls shown here may be somewhat different from your monitor. ON/OFF Main Power Button INPUT SELECT Button Sub Power Button Power Standby Indicator VOLUME (F,G) Buttons Illuminates red in standby mode. Illuminates green when Remote Control Sensor the Monitor is turned on. Connection Options Connection Options Back Conne
Краткое содержание страницы № 8
Introduction Remote Control Key Functions Remote Control Key Functions - When using the remote control, aim it at the remote control sensor on the monitor. - Under certain conditions such as if the remote IR signal is interrupted, the remote control may not function. Press the key again as necessary. POWER Switches the Monitor between INPUT SELECT ON and STANDBY. Selects source: Video, S-Video, SLEEP RGB, DVI, or Component mode. Sets the Sleep Timer. POWER (Refer to p.18) DASP SLEEP INPUT SELEC
Краткое содержание страницы № 9
Installation Installation Installation Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer where you purchased the product. POWER SLEEP INPUT SELECT APC DASP ARC PIP ARC PIP TWIN PICTURE SWAP SUB INPUT MENU MUTE VOL OK VOL 12 3 45 6 78 9 0 POWER STOP P/STILL 1.5V REW PLAY FF REC WIN.SIZE WIN.POSITION SPLIT ZOOM ZOOM - ZOOM + Owner’s Manual Alkaline Batteries BNC-RCA Adapter Remote Control D-sub 15 pin Cable Power Cord
Краткое содержание страницы № 10
Installation Installation Instructions continued Installation Instructions continued Desktop Pedestal Installation Desktop Pedestal Installation For proper ventilation, allow a clearance of 4” on each side and the top, 2.36” on the bottom, and 2” from the wall. Detailed installation instructions are included in the optional Desktop Stand Installation and Setup Guide available from your dealer. 4 inches 2 inches 4 inches 4 inches 2.36 inches Wall Mount: Vertical installation (MU-60PZ30M/30V/90M/9
Краткое содержание страницы № 11
Installation External Equipment Connections External Equipment Connections NOTE: Not all cables shown are included with the plasma display. VCR Setup VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and Monitor. - Use the ISM Method feature to avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed image, shown at the sides of the screen, may
Краткое содержание страницы № 12
Installation External A/V Source Setup External A/V Source Setup How to connect 1. Connect the provided BNC-RCA adapter to the monitor’s VIDEO AUDIO L YPB PR R AUDIO L (MONO) R INPUT. VIDEO AUDIO INPUT S-VIDEO AUDIO INPUT COMPONENT INPUT INPUT 2. Connect the audio and video cables from the external equip- ment's output jacks to the monitor input jacks, as shown in the figure. When connecting the monitor to external equipment, match the Camcorder jack colors (Video = yellow, Audio Left = white,
Краткое содержание страницы № 13
Installation PC Setup PC Setup - This monitor provides Plug and Play capability, meaning that the PC adjusts automatically to its settings. The monitor sends configuration information (EDID) to the PC using the Video Electronics Standard Association (VESA) Display Data Channel (DDC) protocol. - The monitor perceives 640x480, 60Hz as DTV 480p based on the PC graphic card. In this case, change the screen scanning rate for the graphic card. How to connect 1. To get the best picture quality, adjust
Краткое содержание страницы № 14
Installation Monitor Display Specifications (RGB-PC / DVI-PC Mode) Horizontal Vertical Horizontal Vertical Resolution Resolution Frequency(KHz) Frequency(Hz) Frequency(KHz) Frequency(Hz) 31.468 70.09 31.500 60.00 640x350 37.861 85.08 852x480 35.000 70.00 31.469 70.08 37.500 75.00 720x400 37.927 85.03 48.363 60.00 31.469 59.94 1024x768 56.476 70.06 35.000 66.66 60.023 75.02 640x480 37.861 72.80 54.348 60.05 1152x864 37.500 75.00 63.995 70.01 43.269 85.00 67.500 75.00 35.156 56.25 1280x960 60.000
Краткое содержание страницы № 15
Operation Operation Operation Turning on the Monitor Turning on the Monitor Turning on the Monitor just after installation 1. Connect power cord correctly. 2. Press the ON/OFF button on the Monitor. At this moment, the Monitor is switched to standby mode. Press the INPUT SELECT button on the Monitor or press the POWER, INPUT SELECT button on the remote control and then the Monitor will switch on. Turning on the Monitor (power cord is still connected) 1. If the Monitor was turned off with th
Краткое содержание страницы № 16
Operation Video Menu Options Video Menu Options - Picture menu adjustment are unique to each input source. Readjust Video menu settings for each fol- lowing input source as preferred. • RGB (PC) / DVI (PC), • RGB (DTV) / DVI (DTV) / Component (480p, 720p, 1080i) • Video / S-Video / Component (480i) APC (Auto Picture Control) APC (Auto Picture Control) - APC adjusts the Monitor for the best picture appearance. - When adjusting Video menu options (contrast, brightness, color, sharpness, and tint)
Краткое содержание страницы № 17
Operation Audio Menu Options Audio Menu Options DASP (Digital Auto Sound Processing) DASP (Digital Auto Sound Processing) - DASP lets you enjoy the best sound without any special adjustment because the Monitor selects the appropri- ate sound options based on the program content. - When adjusting sound options (treble, and bass) manually, DASP automatically changes to User. 1. Press the DASP button repeatedly to select the appropriate sound setup as shown below. Flat Music Cinema Sports User • Yo
Краткое содержание страницы № 18
Operation Time Menu Options Time Menu Options Clock Setup Clock Setup - If current time setting is wrong, reset the clock. 1. Press the MENU button and then use D / E button to select the TIME menu. VIDEO Clock G Off timer 2. Press the G button and then use D / E button to select Clock. AUDIO On timer Auto off TIME 3. Press the G button and then use button to set the hour. D / E SPECIAL 4. Press the G button and then use button to set the minutes. D / E SCREEN 5. Press the OK bu
Краткое содержание страницы № 19
Operation Special Menu Options Special Menu Options Key Lock Key Lock - The monitor can be set up so that it can only be used with the remote control. - This feature can be used to prevent unauthorized viewing by disabling the front panel controls. - This Monitor is programmed to remember which option it was last set to even if you turn the monitor off. 1. Press the MENU button and then use button to select the SPECIAL menu. D / E VIDEO Language Key lock G On AUDIO 2. Press the G button an
Краткое содержание страницы № 20
Operation Screen Menu Options Screen Menu Options Auto Adjustment Auto Adjustment - RGB (PC) mode only; This function doesn’t work for RGB-DTV mode. - Automatically adjusts picture position and minimizes image shaking. - After adjustment, if the image is still not correct, your Monitor is functioning properly but needs further adjustment. - Auto config. and Manual config. are not available for DVI mode. 1. Press the MENU button and then use D / E button to select the SCREEN menu. VIDEO Auto conf
