ページ1に含まれる内容の要旨
VM9314
Operating Instructions
CLOSE PIC WIDE TILT
VM9314
SRC
EJECT
MUTE
DISP
A/ V
PTT INPUT
® watts peak
40W x 4
160
ページ2に含まれる内容の要旨
VM9314 ii
ページ3に含まれる内容の要旨
VM9314 CONTENTS Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VM9314 Mobile Multimedia Receiver for maximum enjoyment. Features................................................................................................................................ 1 Optional Equipment ...............................
ページ4に含まれる内容の要旨
VM9314 iv
ページ5に含まれる内容の要旨
VM9314 FEATURES Congratulations on your purchase of the Jensen VM9314 Mobile Multimedia Receiver. It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9314 installed by a reputable installation shop. DVD • Aspect Ratio - Full and Normal • Fast Forward - 2X, 4X, 8X and 20X • Slow Motion - 2X, 4X, 8X and 20X • Play, Pause, Stop, Next Chapter and Previous Chapter CD / MP3 / WMA • CD-Text Compatible • ID3 Tag Compatible • Directory
ページ6に含まれる内容の要旨
VM9314 Chassis • 1.0 DIN (Import / ISO-DIN Mountable) • Motorized Flip-Out / Flip-Up LCD Screen • 8 Character / Segment Type Secondary LCD Display • 7" TFT Active Matrix LCD • 1,152,000 Sub Pixels (480 x 2400) • Screen Tilt / Angle Adjustment • Heat Management System - Forced Air-Cooling to Keep the Chip-Sets Operating at Nominal Temperatures General • iPod Voice Control • Navigation Ready (NAV102) • Bluetooth Ready (with purchase of BTM15) providing hands-free profile for safety / convenience
ページ7に含まれる内容の要旨
VM9314 OPTIONAL EQUIPMENT • NAV102 The VM9314 is "navigation ready." Before accessing any navigation features, you must purchase and install the navigation module (NAV102). All installation and operating instructions will be included with the navigation module. Once the navigation module is connected and operating properly, the NAV source mode will become active. While the navigation module is not installed, the NAV option appears gray, indicating the function is not available. • Satellite
ページ8に含まれる内容の要旨
VM9314 WARNINGS WARNING! Never install this unit where operation and viewing could interfere with safe driving conditions. WARNING! To reduce the risk of a traffic accident (except when using for rear view video camera) never use the video display function while driving the vehicle. This is a violation of federal law. WARNING! Never disassemble or adjust the unit. WARNING! To prevent injury from shock or fire, never expose this unit to moisture or water. WARNING! Never use irregular discs.
ページ9に含まれる内容の要旨
VM9314 ANTI-THEFT FEATURE The VM9314 is equipped with an anti-theft feature requiring the user to enter a password upon initial power on. * 1 2 3 4 5 6 7 8 9 0C Entering the Default Password The default user password is 012345 (6 digits). Enter the password using the on-screen keypad and then press the arrow (enter) button. You can also use the remote control keypad to enter the password. Press the >/|| button (30) on the remote control to confirm. 5
ページ10に含まれる内容の要旨
VM9314 Changing the Password To change the SECURITY password using the touch screen, perform the following steps: 1. Touch the button to view the “SETUP” menu. 2. Touch SECURITY to view the “SECURITY” sub-menu. TIME SCREEN THEME SWC SECURITY VERSION SECURITY P.VOL Please input password Password AUDIO **** 1 2 3 Factory Settings Restore Exit VIDEO 4 5 6 BT 7 8 9 DVD 0 Clear RADIO 3. Enter the current password (default is 012345) and touch the arrow (enter) key. 4. Touch the “Password” field
ページ11に含まれる内容の要旨
VM9314 CONTROLS AND INDICATORS 1. Rotary Encoder Rotate to adjust the volume. While in the audio menu, press and release to enter and/or confirm audio settings. Press to activate the MUTE function and silence the receiver. Press again to resume sound. 2. SRC Press to turn the unit on. Press and hold to turn the unit off. When on, press to view the SOURCE menu. 3. IR Remote Control Receiver 4. USB Interface Connector Connect a USB device for playback of music/video files. 5. TFT Display 6. 3.
ページ12に含まれる内容の要旨
VM9314 13. WIDE/ |<< Press to adjust the display aspect of the picture to one of two settings: Full, Normal or STANDBY. With the monitor closed, press to seek backward. When the NAV102 is connected to the VM9314, press and hold to display the navigation user interface. The TFT screen must be open for this function to operate. 14. PIC/BAND Press and hold to view the setup menu. Touch “Screen” to adjust dimmer and backlight picture settings (see “SCREEN Sub-menu Features” on page 22). With the
ページ13に含まれる内容の要旨
VM9314 REMOTE CONTROL 15 14 13 12 CLOSE PIC WIDE TILT 5 7 VM9314 2 EJECT MUTE 1 DISP A/ V INPUT PTT 10 3 16 11 9 6 4 8 9
ページ14に含まれる内容の要旨
VM9314 See remote control tables in various sections for button functions. 8 3 4 35 5 iPod 9 MUSIC PHOTO VIDEO 16 13 23 1 2 15 30 14 28 31 17 18 11 19 32 22 24 12 21 10 25 20 27 26 29 6 PTT 34 33 7 10
ページ15に含まれる内容の要旨
VM9314 USING THE TFT MONITOR Open/Close TFT Monitor Open TFT Monitor Press the OPEN button (15) on the front panel or press the ( ) button (25) on the remote control to activate the mechanism that moves the display panel into the viewing position. Close TFT Monitor Press the OPEN button (15) on the front panel or press the ( ) button (25) on the remote control to load the display panel back into the compartment. TFT Monitor Auto Open If “TFT Auto Open” is set to “Auto” when the unit is turned
ページ16に含まれる内容の要旨
VM9314 Aspect Ratio Press the DISP button (10) on the remote control or WIDE button (13) on the monitor to adjust the aspect ratio as follows: FULL The entire screen is extended horizontally to the aspect ratio of 16 to 9. The extension ratio is the same at any point. NORMAL The conventional display image has a 4 to 3 ratio of horizontal to vertical, leaving a blank area on the right and left sides of the display. STANDBY Screen becomes black. Touch screen to resume. Parking Brake Inhibi
ページ17に含まれる内容の要旨
VM9314 Table 1: Monitor Protective Measures OPEN Button Power Obstruction Self Protection Pressed Reconnected Monitor loading in Unit stops at Monitor fully Monitor is automati- horizontally obstruction point extended horizon- cally loaded into unit tally Monitor loading Unit stops at Monitor swivels Monitor swivels out vertically obstruction point back to the unit back to the unit Monitor loading in Unit stops at Monitor swivels Monitor swivels vertically obstruction point back to the unit b
ページ18に含まれる内容の要旨
VM9314 OPERATING INSTRUCTIONS Power On / Off Press the /SRC button (2) on the unit (or the button (4) on the remote control) to turn the unit on. The buttons on the front of the unit light up and the current mode status appears in the LCD (11). You can also turn on the unit by pressing the OPEN button (15) and opening the TFT screen. Press and hold the button to power off the unit.The monitor is drawn back into the main compartment. Remote Control Functions Table 2: Common Remote Control
ページ19に含まれる内容の要旨
VM9314 Mute/Line Mute Press the rotary encoder button (1) on the front panel or the MUTE button (3) on the remote to mute the volume from the unit. Press the rotary encoder button again to restore the volume. “MUTE” is displayed on the LCD. Adjusting the volume or using any of the audio setup features cancels the mute function. If the “MUTE” wire is connected, audio output mutes when a telephone call is received by the car phone (using optional BTM15) or when verbal navigation is played (us
ページ20に含まれる内容の要旨
VM9314 NOTE: You can press and hold to drag the “Source Menu” icons and rearrange them based on your preference External Devices External peripheral devices, including a game console, camcorder, navigation unit, iPod, Zune, etc. can be connected to this unit via RCA output using the A/V Media Adapter Cable (included). EJECT A/ V INPUT 1 Right Audio 2 Left Audio 3 Ground 4 Video 3.5mm A/V Cable (not included) Connect the external device to the A/V Media Adapter Cable and then plug the cable
