ページ1に含まれる内容の要旨
Multimedia Receiver
BAND AS
CLOSE DISP
V M 94 13
Operation Manual
Manual de Operación
Instructions d'opération
ANGLE / TILT PICTURE
Press Audio Enter
VM9413
MUTE NA V INT RPT
Watts Peak
Watts en Crête
Vatios el Máximo
40W x 4
160
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
CONTENTS TABLE DES MATIÈRES Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s Merci d'avoir choisi un produit Jensen. Nous espérons que vous allez trouver les instructions manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to dans ce guide de propriétaire claires et faciles à suivre. Prenez quelques minutes à le use all the features of your new Jensen VM9413 Mobile Multimedia Receiver for maximum cons
ページ4に含まれる内容の要旨
ii
ページ5に含まれる内容の要旨
VM9413 INTRODUCTION Congratulations on your purchase of the Jensen VM9413 • USB - Supports Hard Drives and Flash Memory • Rear Camera Mobile Multimedia Receiver. Drives The head unit is "camera ready." Before accessing any • jLinkDirect for iPod camera features, you must purchase and install a rear It’s a good idea to read all of the instructions before beginning • RCA Audio /Video Input video camera. Once the rear camera is connected and the installation. We recommend having your head unit
ページ6に含まれる内容の要旨
VM9413 ANTI-THEFT FEATURE The VM9413 is equipped with an anti-theft feature requiring 3. Touch the keypad icon next to the blue box in the the user to enter a password upon initial power on. “Password” field to open the on-screen keypad. 02:40 AM RADIO SETUP Enter Password: General Language Audio Speaker Bluetooth Back 1 2 3 RDS 6 4 5 Password 1 2 3 Rating 7 8 9 Rating 8. Adult 4 5 6 Demo Hardware Load Factory Reset 0 8 9 7 P.VOL Clear 0 TS Cal 4. Enter a new 6-digit password and press the Ente
ページ7に含まれる内容の要旨
VM9413 CONTROLS AND INDICATORS Button Operation 7 2 4 3 1 1. OPEN/CLOSE Press to activate the automatic mechanical system and move the TFT monitor into viewing position. Press again to close the TFT. 2. DISP OPEN DISP BAND AS With the TFT monitor open, press to cycle through information available on the TFT screen. 16 With the TFT monitor closed, press and hold to view the Press Audio Enter clock. 15 VM9413 In DVD Mode, press to view the top and bottom information 5 bars. Press again to turn
ページ8に含まれる内容の要旨
VM9413 CONTROLS AND INDICATORS 11. (down joystick) 7 3 1 2 4 DVD/Disc Mode: Press once for slow forward/slow reverse. TUNER Mode: Press to go down one frequency step. MENU Mode: Press once to move the cursor down. 12. Reset Multimedia Receiver Press to reset system settings to factory default (except the DISP BAND AS CLOSE password and parental lock setting). 13. Pause/Play/Enter Press to pause or resume playback or to confirm current selection. 14. (right joystick) DVD/Disc Mode: Press once t
ページ9に含まれる内容の要旨
VM9413 REMOTE CONTROL Table 1: Remote Control Functions 8 3 Button Function 4 35 Name Ref# DVD VCD TUNER CD/MP3/USB/SD SATELLITE 5 9 MENU 1 Enter the main menu of Turn on/off PBC when TAG HD Radio sta- Displays diagnostics 16 13 the disc playing VCD tions for transfer to an screen iPod 23 1 TAG TITLE 2 Enter the title menu of Play first ten seconds Play first ten seconds Category list in CG 15 2 the disc of each chapter/title of each file mode 30 14 MUTE 3 Toggle on/off audio out- Toggle on/of
ページ10に含まれる内容の要旨
VM9413 Table 1: Remote Control Functions Button Function Name Ref# DVD VCD TUNER CD/MP3/USB/SD SATELLITE >>| 19 Select the next chapter Select the next chapter Search an available Select the next track for Searches an available for playback for playback radio station by playback radio station by increasing tuning fre- increasing tuning fre- quency quency 20 Stop playback/end call Stop playback/end call End call Stop playback/end call / 21 Go to specific time Go to specific time Dial call Dial
ページ11に含まれる内容の要旨
VM9413 USING THE TFT MONITOR Open/Close TFT Monitor Monitor Left/Right Angle Adjustment Aspect Ratio Open TFT Monitor To manually adjust the left/right angle of the TFT screen, Press the WIDE button (28) on the remote control or WIDE follow these steps: button (22) on the monitor to adjust the aspect ratio as Press the OPEN/CLOSE button (1) on the front panel or follows (only active with video source): 1. Make sure the TFT screen in “Out”. Press the OPEN press the ( ) button (25) on the remo
ページ12に含まれる内容の要旨
VM9413 Parameter Adjustment Procedure 1. Enter Picture Quality Setting Mode: Press the PIC button on the remote control or press and hold the WIDE/PICTURE button (22) on the monitor. 2. Select Item to Set: Use the up/down joystick buttons to select “BRIGHT” or “CONTRAST”. 3. Set Parameters: Use the left/right joystick buttons to modify the settings. 4. Exit Picture Quality Setting Mode: Press the PIC button on the remote control or the WIDE/ PICTURE button on the monitor. Parking Brake Inhibit
ページ13に含まれる内容の要旨
VM9413 OPERATING INSTRUCTIONS back of the head unit allows connectivity to the PAC adapter. Select “AUX 1” to play an auxiliary device connected via the Power On / Off 4 Please refer to the instructions included with the PAC adapter MediaLink RCA or 3.5mm inputs. For example, you can play Press the /SRC button (6) on the unit (or the /POWER for detailed installation information. music files from a portable music player, video from a video button (4) on the remote control) to turn the unit
ページ14に含まれる内容の要旨
VM9413 Source Menu To adjust an audio feature: To access the SOURCE MENU, touch the TFT screen in the 1. Use the left/right joystick buttons to highlight the audio top left corner of the screen. feature to be adjusted. 2. Press the joystick ENTER button on the control panel (13) or remote control (18) to select the highlighted option. DISC SOURCE MENU 3. Use the joystick to adjust the selected feature to the desired setting. Table 4: Audio Adjustments SD USB NAV DISC Function Adjustment Opti
ページ15に含まれる内容の要旨
VM9413 SETUP MENU To access system settings, press the SETUP button (31) on Audio Sub-menu Features Setting Options Function the remote control or touch the button on the screen to Setting Options Function Clock Adjust (HH:MM) The clock appears in the top right enter the “SETUP” menu. The “GENERAL” sub-menu corner of the screen and on the LCD screen during certain opera- DRC Off Employ the Dynamic Range Control appears highlighted in blue. tions. NOTE: The AM/PM indication for better playba
ページ16に含まれる内容の要旨
VM9413 Bluetooth Sub-menu Features Rating Sub-menu Features Hardware Sub-menu Features The DVD system has a built-in parental lock feature to If the rear-view video camera is connected, the unit is on, and Setting Options Function prevent unauthorized persons from viewing restricted disc the TFT monitor is retracted inside the unit, the TFT monitor content. By default, the rating system is set at the highest automatically moves into the viewing position and Camera Bluetooth On Enable Blue
ページ17に含まれる内容の要旨
VM9413 P.VOL Sub-menu Features Setting Options Function Source DISC Choose a source for which you would like to increase the rela- RADIO tive volume (LEVEL). SD Use the +/- buttons to increase SAT or decrease relative volume for AUX 1 specified source up to 6 deci- bels. USB BT AUX 2 iPod NAV TS Cal (Screen Calibration) To access the “Screen Calibration” function from the SETUP menu, select the “TS CAL” option. After entering calibration mode, a crosshair appears in a corner quadrant of th
ページ18に含まれる内容の要旨
VM9413 TUNER OPERATION 5. Tuning mode indicator About HD Radio™ Technology Selecting a Tuning Mode 6. Preset radio stations: Touch to recall preset stations HD Radio technology allows CD-quality digital broadcasting Touch the A/D button (21) to choose from the following 7. Program Information: Title, Artist, Type of your local AM and FM radio stations. HD Radio broadcasts modes: NOTE: The amount of information displayed when can include multiple channels on the same frequency, which • Auto: S
ページ19に含まれる内容の要旨
VM9413 Enter the desired radio station using the on-screen number close the menu). The preset number and station PTY Search pad. Press Enter to tune to the selected station. To exit the appears highlighted on the left side of the screen. After tuning to an HD Radio channel, the Program Type screen without changing the station, touch Exit. To clear your categories are listed, allowing listeners to find similar entry and start over, touch Clear. NOTE: Multicast stations can be stored as preset
ページ20に含まれる内容の要旨
VM9413 ® iTunes Tagging NOTE: Tags saved to your iPod can be managed using ® the iTunes software, available at www.apple.com/itunes. The VM9413 offers iTunes Tagging, which allows the user to "Tag" songs playing on HD Radio™ stations for purchase later through iTunes. When the onscreen TAG button (24) is Downloading Tags to your iPod touched, the unit stores the title and artist song information To download tags to your iPod, plug an iPod into the iPod that can then be transferred to your i
