Ken-A-Vision , Inc.T-2600 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

screwdriver (1.5mm) into hole on right side near the top of the base.
c. Turn the stage plate lock screw one to two turns counter clockwise.
Carefully remove the stage plate, the lamp holder for the bottom light
source should now be in view and accessible.
d. Gently pull up on the lamp to unclip the fuse type bulb from the
holder. Press the new lamp into place.
e. Replace the stage plate. Tighten the Stage Plate lock screw until
snug. Do not over tighten.
Replacement of Upper Light Source
a. Unp

ملخص المحتوى في الصفحة رقم 2

VISION SCOPE OPERATION APPLICATION a. Place the specimen you are viewing in the center of the stage. Use Stereomicroscopes for viewing larger specimens. Our easy to b. Accurately align the objective lens. Move the focus knob until the view, high quality Vision Scopes will magnify the object 10 to 80 times. specimen comes into view. Note that the viewing head will move up and The T-2200 series and the T-2600 has fluorescent light below the stage, down when focusing. which keeps your specimen c