Ken-A-Vision , Inc.t-1252c دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

INSTRUCTIONS FOR CHARGING YOUR CORDLESS DIGITAL PREP SCOPE
1. Plug in the square pin connector of the USB cable to the back of the Cordless
Digital Prep Scope.
2. Then connect the opposite end to the USB port of your computer.
3. While your computer is on the microscope will recharge. You can use your
computer for other applications while the microscope is recharging. NOTE: you do
not have to fully discharge or drain the battery to recharge.
WARNING
Nickel Metal Hydride Battery
Regular c

ملخص المحتوى في الصفحة رقم 2

Focus Cordless Digital Prep Scope With the Cordless Digital Prep Scope connected to the USB port place a pre- APPLICATION pared slide under the stage clips and move into position for viewing. Use the 4x Thank you for purchasing your Ken-A-Vision Cordless Digital Prep Scope. objective first. Raise the stage until it will go no higher. Then lower the stage to Recharged by the USB port in your computer, this unit will operate as a cord- bring into focus. (View the image on the computer screen or t