Ken-A-Vision , Inc.T-1922 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

push, and turn clockwise . For fluorescent lamp pull out of socket and remove
to install push new lamp into socket.
c. Avoid touching the glass surface of the bulb with bare hand. Any oil
brought onto the bulb by the bare hand will negatively affect the heat dissi-
pation and shorten the life of the bulb. Clean the bulb surface if the user has
touched the bulb surface accidentally.
e. Replacement bulbs may be purchased on Ken-A-Vision web site under
accessories at www.ken-a-vision.com
CARE AND

ملخص المحتوى في الصفحة رقم 2

MICROSCOPE PREPARATION AND SET-UP BUILT-IN ILLUMINATOR An in-base illuminator is built into the bases of these microscopes. Bulb replacement can be done from the underneath side. See Bulb Replacement Step 1 instructions. The built-in 20 watt bayonet incandescent bulb or 5 watt fluores- Unpack the two microscopes, the bridge assembly and cent provides all the light needed for illumination. Do Not Use Any Other Bulb the binocular head. Remove all the plastic covers. Place As It May Damage The U