AMX CSG SIP Communications Gateway 544/580 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Installation Guide
CSG SIP Communications Gateway (CSG-500/544/580)
ATTENTION: READ THIS FIRST!
CSG Specifications (continued)
For more detailed installation, configuration, programming, and operating
Included � PSN3.0, Power Supply, 3.0A, 12.0CVD (FG423-31)
instructions, refer to the CSG SIP Communications Gateway Instruction Manual
Accessories
� CSG SIP Communications Gateway Installation Guide
available on-line at www.amx.com.
(93-2182-01)
� 2 Surface mounting brackets (62-2182-04)
� 4 #4-

ملخص المحتوى في الصفحة رقم 2

Setting Up Your Touch Panel to Work with Your CSG LED Definitions (continued) Follow these steps to configure your touch panel to work with the CSG: Analog Off No analog port is installed in the corresponding port. (8 ports) 1. From the main Setup page on your touch panel, press Protected Setup. Green (solid) Port is configured for FXS operation and is enabled. The Protected Setup page opens. An analog telephone may be connected to this port. 2. Press Other Settings. A slide out menu appears.