AMX ICSNet Daughter Card NXA-ICSNET دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Installation Guide
NXA-ICSNET ICSNet Card for X100-Series Controllers
Overview
The NXA-ICSNET ICSNet Daughter Card (FG2105-10) is used to provide
Chassis housing screws
ICSNet connectivity for NI-2100 and NI-3100 units that are not already
(6 on top, 3 on each side)
ICSNet-ready.
(top panel)
ICSNet
cover plate
(rear panel)
FIG. 1 NXA-ICSNET ICSNet Daughter Card
This card is already installed within the NI-4100 NetLinx Integrated Controller,
and the versions of both the NI-2100 and the NI-3

ملخص المحتوى في الصفحة رقم 2

ICSNet card connector 3 mounting holes used to secure ICSNet card to the main board. FIG. 5 ICSNET card seated against motherboard FIG. 8 NXA-ICSNET card components Removing ICSNet Cover Plate Replacing Motherboard/Daughter Card Assembly The ICSNet cover plate is designed so that the flaps can be easily bent without 1. Carefully replace motherboard into chassis housing. using any tools. 2. Fasten with 11 mounting screws. See FIG. 3. CAUTION: Do not use a metal tool to assist in this removal