AMX AXR-IRSM+ دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Quick Start Guide
AXR-IRSM+ Swivel-Mount Remote IR Receiver
Overview
IR SNSR IR SNSR
The AXR-IRSM+ (FIG. 1) is a remote IR receiver for use with both AMX
38/455 38/455
Axcess/NetLinx Central Controllers and operates via the AXlink bus to
kHz kHz
remotely control AXlink devices. The AXR-IRSM+ is in a swivel-mount
Setting for 38 kHz Setting for 455 kHz
enclosure for wall or ceiling installations. The AXR-IRSM+ (FG454-01)
works with AMX 38 kHz or 455 kHz IR transmitters.
FIG. 3 Receive frequen

ملخص المحتوى في الصفحة رقم 2

consumption limits, you can connect a local 12 VDC power supply to the Checking IR Data Status AXlink connector. Locate the red IR Data LED on the front of the unit (FIG. 1). Point the system's AMX transmitter towards the sensor and press a button. The IR Preparing Captive Wires Data LED lights when the unit receives data. You will need a wire stripper and a flat-blade screwdriver to prepare the If the IR Data LED does not light: captive wires:  Verify that the transmit LED on the transmitt