AMX NetLinx Integrated Controller NI-900 دليل المستخدم

ملخص المحتوى في الصفحة رقم 1

Installation Guide
®
NI-900 NetLinx Integrated Controller
For more detailed installation, configuration, programming, file transfer, and operating
NI-900 Specifications (Cont.)
instructions, refer to the NI-700 and NI-900 NetLinx Integrated Controllers Instruction
Manual, available online at www.amx.com.
Rear Panel • IR/Serial (Ports 2 - 4): Two IR/Serial control ports support
Connectors high-frequency carriers of up to 1.142 MHz with each output
(Cont.): being capable of three electrical

ملخص المحتوى في الصفحة رقم 2

Note: DIP switch 1 activates/deactivates the Program Run Disable Mode. DIP Connections and Wiring Switches 2,3, and 4 must remain OFF at all times. FIG. 2 shows the layout of the connectors and components located on the rear of the NI-900 NetLinx Integrated Controller. Baud Rate Settings Ethernet Baud Rate Position 5 Position 6 Position 7 Position 8 RS-232/422/485 (Port 1) 9600 bps OFF ON OFF ON RS232 / 422 / 485 NI-900 38,400 bps OFF ON ON ON ETHERNET 10/100 (default) L/A SPD 12VDC 3 2 1